Editable Adaptor plate for 12V Car Lighter Socket & 2 USB Charger Voltmeter Switch Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made an adaptor plate for a common eBay/AliExpress item as I found the plate wasn’t great for screwing into wood.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 1062
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a common, cheap, item on eBay or AliExpress thats a generic facia for 12v plugs and USB.
i wanted this item put onto a wooden box to go in my shed to keep a monitor on my leisure battery & the solar panel that charges it plugs into the cigarette port. This wasn’t going in a car.
I found the screw holes were too close to these plugs at the back making screwing into wood tricky. So I wanted a wider face plate.
Whilst I could have just designed a faceplate with 3 holes easily, I wanted the challenge of making this plate fit.
i’ll only attach an editable CAD file as everyone will have different needs if they wish to use this.
my only slight issue, is the holes for the screws don’t fully line up, they’re off by 1mm here and there but a screw will certainly go in and secure it. I’m providing an editable STEP file if you wish to make any adjustments!