Ultimate router jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multifunction baseplate for trim router
- Ocena
- 4,875 / 5
- Polubienia
- 1395
- Pobrania
- 8963
- Wydruki
- 8
- Wyświetlenia
- 33 110
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This new baseplate allow mounting of several trim routers
Tested with 65mm Makita
Compatible with :
- Makita 3709 - 3710 - RT0700 - RT0701
- Katsu
- Erbauer EPR710
- Dewalt DCW600B, DWP611 & portercable 450 compact (2.4"x2.4")
- Ryobi (55x55mm) P601
- Ridgid R2401, R860443B
- Portercable 6430 & 6435
- Black&Decker 7604
- …
Multiple functions
- Enlarged base plate with handle
- Flush trimming
- Circle cutting (short: 15 to 300 mm & long: 280 - 470 mm)
- Centred mortise with sliders
- Centred mortise with quick mounting pin
- Grooves with millimetric adjustement system
- Exhaust
- Round base
- Parrallel guide with adjustable flange
The baseplate is designed to match MK3 and MK4 size
Insert to use :
OD =6
D2 = 5.3 or 5.4
L =4 or 5
Assembly part 1 - Base
Assembly part 2 - Flushing Base
Assembly part 3 - Handle
Assembly part 4 - Knurled nut
or
Assembly Part 5 - Parrallel guide
Hardware needed
--------------------
| Type | Quantity |
| M6 rod | 50mm |
| M4x16 | 7 |
| M5x16 | 2 |
| M4 nut | 25 |
| M5 Nut | 2 |
| M6 Nut | 2 |
| M4 Brass insert Ø6x4 or Ø6x5 | 6 |
| Nail or small rod for pin compas | 1 |
| Magnet Ø8x3 | 1 |
I designed also a router base compatible for 65mm routers :
https://www.printables.com/model/1086661-router-base-woodworking
v1.1 (April 19th 2024)
-------------------------
Adding round base
Exhaust modification
Adding compatibility with Ryobi & Dewalt routers
v1.2 (April 20th 2024)
-------------------------
Adding parrallel guide
v1.3 (May 8th 2024)
-------------------------
Modification of the Flush triming base to add a V shape and allow the use of M4 instead of heat insert
Modification of the clamping bar to improve it's rigidity
Introduction of an 10mm router base (higher rigidy but less milling deph than the 7mm base)
v1.4 (May 13th 2024)
--------------------------
Addition of a generic router base in 7 and 10mm
this generic base add compatibility with Porter Cable PCE6430 & PCE6435, Black & Deker 7604