1 / 3
UniFi G5 PTZ Camera Extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to extend the my G5 PTZ camera out a little to get some more coverage above my garage.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 1053
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (25)Powiązane
I needed to extend the my G5 PTZ camera out a little to get some more coverage above my garage.
I used 2 M3 Threaded Inserts and Bolts I had laying around to secure the original bracket that comes with the camera. The hole is large enough so you can fit your terminated RJ-45 jack through it.
Attached is the Fusion 360 file if you'd like to extend/shorten/modify it.
I printed with PETG for Sun Resistance at 10% Gyroid infll and used 4 Wall Loops for Strenght.