1 / 5
Creality Rear Duct Fan K1 & K1C
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear Fan Duct with full range on the ZYX.
- Ocena
- 4,75 / 5
- Polubienia
- 47
- Pobrania
- 465
- Wydruki
- 4
- Wyświetlenia
- 3380
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 16)Remiksy (1)Kolekcje (104)Powiązane
There is A newer model on my page with better airflow!
https://www.printables.com/model/1234174-improved-creality-k1c-k1-rear-fan-cover
For the K-Series printers.
This fan duct is designed to take out air from around the area of the hot end instead of below the plate for the first many layers.
And it is made so there is still full range on all axis.
I printed it in a upright position, and i added a picture with suggested supports if your printer needs it.
I printed it in ABS. sure it will work in other materials aswel.
- Layer - 0.2mm
- Wall - 2
- Infill - 15%