1 / 7
Ender 7 Fan Shroud moded for 2x 5015 fans — zdjęcie 1
1 / 7

Ender 7 Fan Shroud moded for 2x 5015 fans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To use 5015s instead of 4010s

Ocena
0 / 5
Polubienia
5
Pobrania
41
Wydruki
0
Wyświetlenia
266
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

::::IMPORTANT::::

(To upgrade to this model you have to cut/wear out the sides inner top shell of the Ender 7 in order to fit the new height/volume added with the 5015 fans to fit properly witout hiting anything while printing (shown in photos what need to be wear out, I used a Dremel to do it))

 

The fans can be fixed with only 1 screw/nut each, it will hold them well enough in case that you cant allign the fans with the air hole and the 2 screw fixing holes.
 


I used 4 wall loops

Tree supports

Threshold angle 30º

1st layer density 90%

1st layer expansion 7mm

Tagi