1 / 9
MT1-z³D Multi Toolholder for Skadis and HSW (drill bit / HEX bit / Allenkey / Allen key holder) — zdjęcie 1
1 / 9

MT1-z³D Multi Toolholder for Skadis and HSW (drill bit / HEX bit / Allenkey / Allen key holder)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

19 Drill bit-slots (1mm-10mm 0.5 steps) •31 HEX bit-slots •9 Allen key slots (1mm; 1,5mm; 2mm; 2,5mm; 3m

Ocena
5 / 5
Polubienia
94
Pobrania
436
Wydruki
1
Wyświetlenia
3065
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Multi Toolholder for Skadis and HSW (drill/bit/allen)

In this download you will find two Versions. One for IKEA Skadis, and one for the HSW Honeycombe

This Toolholder will give you 

  • 19 slots for Drills (1mm-10mm 0.5 steps)
  • 31 slots for hex bits.
  • 9 slots for Allen keys (1mm; 1,5mm; 2mm; 2,5mm; 3mm; 4mm; 5mm; 6mm and 8mm)
  • One big side Slot for calipers or folding rule

Improvements over last Version: 

  • One 12mm HEX Side slot to store your Drill-bit-socket (60mm deep)
  • Two 8mm HEX Side slots for short pencils or thinner objects, a scriber for example.  (60mm deep)
  • Removed unnecessary 7mm, 9mm, and 10mm Allen key slots. 
  • Decreased weight (10% less filament)
  • Decreased Print time by 30minutes. 
  • Corrected minimal misalignment
  • Added compensation for filament expansion for “drill” holes smaller than 3mm
  • Added compensation for filament expansion for “Allen key” holes smaller than 3mm
  • Corrected Label positioning
  • Added labels for “Allen key” 2,5 and 1,5mm 

Tagi