1 / 4
Tumbler Vent 10cm Hose to 120mm fan adapter — zdjęcie 1
1 / 4

Tumbler Vent 10cm Hose to 120mm fan adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount this adapter to a standard 120mm fan and connect your standard flexible 10cm / 4in tumbler vent hose securely.

Ocena
0 / 5
Polubienia
43
Pobrania
181
Wydruki
0
Wyświetlenia
948
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mounts directly to a 120mm fan with standard sizes and M4 (DIN912) screws. You can use 2 adapters to create an inline fan and you can combine it with my filter cage.

It is a tight fit (outer diameter is 101mm) and the bulge (2mm, so +4mm in diameter) helps securing the hose. If it is absolutely to tight, use the smaller version or even the 99mm version without the buldge. Wall thickness is 3mm.

Easy print in most materials, I printed in PLA.

Please see my fan collection with more designs like mounts and filter cage.

Tagi