Liczymy pasujące modele…
Need a scoop to serve up dry dog food. I used paint on supports for the inside of the handle but it might get away without. Increased the wall thickness to 3 and 15% infill. Feels sturdy. Print Settings Printer Brand: Creality Printer:…
Designed a small door / cupboard knob 40mm in height 30mm at the base Takes a M3 brass insert for an M3 bolt Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: o.2 Infill: 10 Filament: eSun PLA+…
There are some amazing designs out there, which I've used and enjoyed but wanted to have a crack at designing my own. I may do some variations and also upload but we'll see how it goes and any feedback would be appreciated. The mini…
Here's a tool to easily magnetise bases of mini's (reupload). To make life easier and a boring task quicker, I created these shims to rest the bases, put some glue down and drop a magnet on. This ensures that the polarity is correct, each…
Nothing new but I just thought I'd share my design. This was originally to mount a RPi 4 under a desk, which housed my printer. Then I used for multiple projects, such as a bird box. I wanted the case to be as thing as possible, to keep…
Currently I'm using a ReallyUsefulBox 9L, which has a gridfinity base, with the Citadel paint storage trays. I'm able to get two layers of paints and then two paint brush trays on the top layer (see pic). Any I plan to store other items…
EDIT As picked up in the comments, the width was not quite right, being too narrow. This has been corrected and now measures 237mm c-c and has been uploaded (FrontBackBraceV2) along with the .step file. Apologies if this caught anyone…
Pi Pico Sumo/Battlebot using a Wukong RP2040 breakout board. This is a working progress, so for now, here are the print files for the chassis and the 8T (16T including both sides) and some basic control over WIFI. Using a web browser, the…
I designed this turntable for my son, as he wanted to display his toys and just play around with it. It could also be used for photography, preferably for products or as a 3D scanner. Although I've not used it for the latter. I made…
I needed to house a Shelly 1 within a ceiling rose and it just wouldn't fit. Rather than buying a deeper section ceiling rose, I designed this with a mount. It housed a Shelly1 fine and worked a treat. You may want to test the threads to…
A movement tray for 32mm bases Magnetic - designed to use 5x2 magnets. When printed with a 0.4 nozzle, they fit snug but I still used super glue, just in case. This may depend on your printer or filaments tollerences once printed. Used…
I already made a larger version (https://www.printables.com/model/695679-submersible-pump-using-12v-motor) but wanted to create a smaller version. This model uses a small 5v hobby style motor, very generic and can be found at many…
A remix of the safe wheel, due to it slipping on the original print.
REMIX - only difference is the magnet sits centrally, at request. Here's a tool to easily magnetise bases of mini's (reupload). To make life easier and a boring task quicker, I created these shims to rest the bases, put some glue down and…
Desk tidy designed to take up most room on an Ender 3 sized bed. Made it thin walled to use less filament for maximum space. Compartment for the larger Post It, sticky notes. Slopped section for coins or bits and bobs (screws/bolts etc)…
BT Home Hub mount / bracket REMIX - made walls and mounting area thicker Model in image is printed using 0.6 nozzle. Got some over hang, so drilled this out. Printing in a 0.4 nozzle will suite without the need to sand
I used a salvaged motor for an old printer to creater a small submersible pump. The design includes the housing, impellar and to be used with some flexible tubing. The outgoing OD is 10mm. The end cap is not a super snug fit, as I wanted…
I needed a mount for an Amplifi HD router, so here it is. The slicer was used to add a modifier to remove the top and lower layer for the hex pattern Supports may be needed for the WIFI logo. Yes, the WIFI logo is pointless but meh, why…
A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…
Here is a simple design to hold a 2.5'' SSD drive below a Raspberry Pi 4 Coupe Case. In order for the Pi to have air flow, the SSD is held away from the base. This was designed to be used with a Pi running Home Assistant, replacing the SD…
Needed a tamper, could buy one but created this. The diameter is 60mm but I've added the Step file in case it may need adjusting for your needs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
Holds three Green Stuff World bottles 25mm deep below the stacking ridge Printed with PETG and a 0.6 nozzle, at a layer height of 0.4. Will print the same with a 0.4 nozzle with a layer height of 0.2 There's a dsign with magnets and…
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…
I thought I'd create a REMIX of my case, in order to not get the post mixed up into a mish mash of cases. The original case is here: https://www.printables.com/model/545997-raspberry-pi-4-case-mount-with-30mm-andor-gpio-opt Where the top…
I've listed as a REMIX, although it is a complementary part. Where I have use the laptop holder, I was concerned about it getting knocked off by others. So I created this simple endstop - see photo.
This is a remix (see linked original). I just slightly adjusted for my needs and thought I'd submit the remix if others wanted also. I made the cable holder singular, as I'm using a Hat and the ethernet cable holder/mount is not needed.…
Texture tool for applying texture pastes or others to bases Needed something to apply some mud terrain, so designed this. The end is 1.6mm thick, so it can flex a little Printed in PETG, as I prefer the flex but I'm sure PLA would be fine
A REMIX of a Gridfinity bin for some Knipex wire strippers Lowered the cutout section from a 20mm depth to 15mm, added supports for the end of the handle to stop droop and raised the side walls for stackability, as mine will be in a deep…
Excellent model, I just wanted to remove the magnet holes. Removed using MeshMixer. In the photo you'll see I printed with a 0.6 nozzle, with a 0.4 layer height. Just to reduce print time.
Remix the threaded heat insert tips, so they lay flat. Additional storage added. Two models and step files attached. One model has a centre partition (divide) and the other does not.
Hi all, Made this holder for some Tamiya Glue (other glues may fit, AK?) It's just to keep it up right and not be easily knocked over. Wanted it to fit in a Gridfinity drawer The one in the image is printed with a 0.4 nozzle, PLA and a…
Hi all, For a soltering tool kit, I'm using a ReallyUsefulBox 3l. Trying to maximise space and having already printed the TS101 storage box, an existing box was modified to give an internal storage space height of 50mm. The magnetic base…
I created this bin for a Fluke multimeter, as I didn't want a moulded shape. This is because I have the magnetic strap on the meter and also wrap the leads around. Due to running an Ender 3 still, this was too large to print on the bed.…
To wszystkie aktualnie dostępne wyniki.
