Liczymy pasujące modele…
Just a few simple hose holders for scuba diving. A normal bolt-snap eye or a D-Ring (5mm thickness) goes into the small hole, the holder then snaps onto the hose. The fit on the hose is tight enough to not come lose when you don't want…
Just another Dust Cap for DIN Scuba Regulators. Is this better than others out there? Most probably not, i was just bored and tried tinkering with thread tolerances. But, this cap: has less threads than most, so is less annoying to screw…
Just a simple tool that makes inserting a new O-Ring into an inflator quick coupling much easier. The needed O-Ring size is BS610 (6,75x1,78mm). Pull the coupling ring back as if you would when connecting a BCD and insert the pin with…
Just a copy of the Scubapro Tool needed to insert the piston bushing when servicing a Mk20 or Mk25 (EVO) first stage. I got the measurements with calipers from a machined version of this i own. It should do the job just fine, but so far i…
This is just a variation of my " Dust Cap for DIN Scuba Regulators ", but for regulators with a M26x2 thread for use with gasses with an oxygen content above 21% within the EU. Read this before you print or use it: I do not own such a…
This is a block for a Jenga-like stacking tower game intended for under water use. Each block uses a M8 bolt and nut to add weight to it. Playing the game while in scuba gear in a pool is fun and also a great training exercise for trim,…
An E27 blind plug to make empty sockets safe to touch. Knurled handle for perfect grip. It might fit E26 as well, or it could be a tiny bit too big since E26 is a tiny bit smaller. I have no way to test that though. I used PETG, 0.16mm…
Some cave markers, including an arrow, a cookie, a hex cookie and a REM. All models feature a distinct ridge, making it easy to identify them with your hands. Printing instructions: 0.1mm or 0.2mm layer height (the models are optimized…
A desktop stand for a Dwyer Instruments Magnehelic differential pressure gauge. These are great to tune a second stage scuba regulator and they can be had very cheap on eBay (Kleinanzeigen) and the likes. The stand turned out to be a bit…
Just a knob/handwheel with an integrated square nut for M8 bolts. Works perfectly to mount Doubles or an STA to a backplate in Scuba diving. There's about 5mm of empty space before the bolt reaches the nut, so it's not suitable for…
A canister holder for dive lights. Intended for use on the crotch strap above the butt d-ring, but use it whereever you want. Fits standard 50mm webbing and 4mm bungee rope.
Just a tool to push out a stuck orifice of a Scubapro G250 regulator. Aka the most overengineered chop stick ever. Might work for a G260 as well, but i currently don't need to open one and thus can't test it. Update 2024-09-05: Added a…
A plant tray to place cacti and succulent pots on. I made this for a friend who uses it to place his 7cm pots on like in the photo. He says e.g. those pots (7cm black) fit great. This version is optimized for a 0.4mm nozzle (0.45mm…
A holder for soldering flux syringes that screws onto a shelf board or a table edge. Not much else to it. Accepts 3 wood screws, but even the one at the bottom should be enough. I recommend PETG and 3 walls. Print in the orientation…
This replaces the diaphragm spacer ring (11.190.117) on a Scubapro G250 regulator. The little tabs on these rings tend to break after a few decades, who can blame them. The old ones have a thickness of 1.4mm while the new spare parts SP…
This was designed to make the task of putting on the o-ring on the DIN retainer easy when servicing a Scubapro first stage. Simply cap the bullet on the retaining knob and slide the o-ring down into the groove. The tool eliminates the…
A desktop stand for both a Dwyer Instruments Magnehelic differential pressure gauge and a 100mm Manometer side by side. Print this at 0.2mm layer height I heavily recommend using PETG or some other robust material and not PLA 3 Walls and…
Description An inline adapter that allows you to safely measure voltage and current with a current clamp and a multimeter. Please stick to the parameters provided under the instructions header, several elements of the model are optimized…
Just a helpful jig that makes it easier to put on the O-Ring onto the barrel on the threaded side. Simply cap the bullet on the barrel and slide the o-ring down into the groove. The tool eliminates the need to stretch the o-ring over the…
I needed a mounting bracket for my cute little Mokerlink 2G040210GS Switch (4x 2.5Gbit and 2x SFP+) and this came out. Since i have to use 10Gbase-T SFP+ Transceivers i also wanted to add some active cooling for them. They get HOT. It…
Just a simple wrench/key to unscrew the HP seat cover on a Scubapro Mk10 first stage. Print settings don't matter much for this one, i suggest 3+ walls and PETG. Hardware BOM 2x M2 x 20 Countersunk Screws (DIN 965) 2x M2 Hex Nuts (DIN 934)
To wszystkie aktualnie dostępne wyniki.
