Liczymy pasujące modele…
HDD Rack for the Corsair Frame 4000D. 0.25" Air Space, 4 HDD Stl has orientation Top vs Bottom, not symetrical. The HDD add the rigidity, stack them in order. Mods: Add missing hole to the included HDD Tray, circled in pic Use SATA power…
Designed for use with my Ryobi Compact Battery Powered Chemical Sprayer. This allows the use of "standard" bottles. The intake tube can simply be extended with 5/16 in. I.D. x 7/16 in. O.D. Clear Vinyl Tubing No supports
6.5 Creedmoor Powder Funnel, largest opening possible, no spilled kernals 0.4 nozzle 0.1 layer 20% Infill 3 perimeters top, bottom, side No brim if quality PETG, brim for PLA Print Settings Supports: No Resolution: 0.1 **Infill:** 20%…
6 Slot Print Sheet Stand I have the 3 Prusa Print sheets, plan on adding more. 305 x 305 fits https://www.aliexpress.us/item/3256806033288125.html?spm=a2g0o.order_list.order_list_main.5.1bee18025vSb2g&gatewayAdapt=glo2usa
3 Perimeters Top, Side Bottom 15% Infill 4 Switch Panel https://www.thingiverse.com/thing:3870595 8 Switch Panel https://www.thingiverse.com/thing:4113694 Print Settings Supports: No Resolution: 0.3 **Infill:** 15 Filament: SUNLU PETG…
Reference Material Only Category: DIY
Refillable Carbon Filter for the Advanced Filtration Holds 73gr of carbon pellets + The Voxel carbon Prusa ALVEO3D holds 65gr of carbon pellets You can now replace only the carbon when needed, also the HEPA filter is half the price. Note:…
Tight tolerances, ensure your printer is set-up properly 2 Bulb Inserts are included, one blank for easy Remix for other sockets. No Supports 0.4 Nozzle - 0.2 layer, except for Lamp Shade (0.6 Nozzle - 0.2 layer) 3 perimeters vertical,…
Quick & easy add-on does not block the air flow. Holds 15g of activated carbon pellets. The carbon filtration in the advanced filtration is very insufficient. After just 1/2 spool of ABS, it was spent. Even when new it only captured 70%…
3 Perimeters, 3 Top & Bottom layers Holes for #8 Screws 4 Switch Panel https://www.thingiverse.com/thing:3870595 Switch Blank https://www.thingiverse.com/thing:4113263 Print Settings Supports: No Resolution: 0.3 **Infill:** 80 Filament:…
Clamp (For Shaft Diameter 1.128") Used on Minn Kota Endura C2-55 5 Perimeters 100% Infill Use 2 - 1/4 Bolts. Hole on side for 1/4 carabiner (Snug Fit) Spacer for Harken Pulley Kit 5 Perimeters 20% Infill Harken Pulley…
Front Power Switch added to the wider Prusa Core One L Squash Ball Feet Fits all core models Use organic supports everywhere. 3mf contains my support settings, snap off with ease. If you don't know how to wire this, then this mod is not…
This was designed for the Core One L, but this will fit any Core One, the length of the T slot can be shorter. See the Bufferless MMU3 on Core One w/ Rewinder Spools. I have included all the parts I used, so you don't need to find them.…
375 Ruger Powder Funnel, largest opening possible, no spilled kernals 0.4 nozzle 0.1 layer 20% Infill 3 perimeters top, bottom, side No brim if quality PETG, brim for PLA Print Settings Supports: No Resolution: 0.1 **Infill:** 20%…
This is an advanced project. This was only designed and tested to work with my needs in mind. My typical designs are tested to ensure they should work for everyone. This is not one of them. You’ll likely need to: Use Fusion 360 to modify…
Thinner 5mm Diffuser
The Frame 4000D is very customizable. I wanted exhaust fans that fit over the AIO Cooler. 200mm fans are quiet and move alot of CFM. This adapter is plug and play with the case Top and the Top Panel. Fit 2 x 200mm fans. I recommend the…
Reloading Tray 375 Ruger, should fit 300WM and all the cases of that diameter 0.4 nozzle 0.2 layer 15% Infill 3 perimeters top, bottom, side No brim if quality PETG, brim for PLA Print Settings Supports: No Resolution: 0.2 **Infill:** 15%…
The swing arm droops and the wireharness droops even more. When the print head is in the back right corner, the wire harnes/ptfe tube will catch on the fan. The 4 plastic rivets pop off the fan guard. The guard is made from steel. This…
Revised Inner Adapter 5MM V1 to fit Core One L
Original File https://www.thingiverse.com/thing:4266244 This will not work with 308, this is designed for 6.5 Creedmoor only WATCH ALL 3 Videos Enjoy! In Action https://www.youtube.com/watch?v=TqsXkGKeaGE Parts Preparation…
5v Relay Holder https://smile.amazon.com/gp/product/B07874KSLY/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 Tight tolerances, ensure your printer is set-up properly Relay L ~ 1.327" W~1.403" Print Settings Printer Brand: Prusa Printer: i3…
Update 3/11/19 4:56pm EST The correct STL files re-uploaded Original https://www.thingiverse.com/thing:1688024 The Base was inspired by a cast iron black pipe flange The Insert allows the installation of a US E12 Socket. I printed the…
For Scotty No. 241 Combination Side/Deck Mount 2.094" Tall 5 Perimeters, 5 Top & Bottom layers, 100% infill Anchor Mount https://smile.amazon.com/gp/product/B001M4HTNY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Print Settings Printer…
3 Layer Top & Bottom 3 Perimeters Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3 Infill: 10% **Filament:** Sunlu PETG Black Category: Automotive
Drop Tube for 6.5 Creedmoor Case Collator 3 perimeter, 3 top/bottom Dillon Switch# 13779 Springs: Used 5/8 & 1/2 https://smile.amazon.com/gp/product/B07HHW8F3K Pipe https://smile.amazon.com/gp/product/B016Y8PXPS/ Flange…
They don't make a swivel top large enough for my Garmin Striker/EchoMap 9", I created a larger version of the Swivel Top. Mine allows it to be completely Parallel to the Base, unlike their design, which always has if off center. No Swivel…
3 Perimeters, 3 Top & Bottom layers Holes for #8 Screws 8 Switch Panel https://www.thingiverse.com/thing:4113694 Switch Blank https://www.thingiverse.com/thing:4113263 Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No…
6.5 V2 Creedmoor Plate. Collating these very long boat tail 6.5mm are a challenge, they like to ride above, angle your feeder at 45 Degrees, the more in the collator, the better the result. For the original, smaller, OBF. Clutch plates…
223 Plate. I have made this by request, I have not tested it. It appears to work great, check out the video. Based on my 6.5 Creedmoor Plate. https://www.thingiverse.com/thing:3547180 Print 0.2 layer 0.4 nozzle 4 Side perimeters 3…
This is a Fan panel that will fit Any of the Thermaltake Core Series, this is a Core V1. The core series all use this part, AC-014-OO1OTN-C1, if it is a match then this will fit your case panel. I have included 2 Panels, a Flat panel for…
Better and cheaper than buying a kit. Has everything I need for 1/4" work before grabbing the 3/8 socket set. Insert & Seal 95A TPU Box was printed in PCTG. PETG is more common. 4 - M3 x 30 Button Head Screws Tools Wera 838 RA S Wera…
This just holds it down 3 Perimeters, 3 Top & Bottom layers, 10% infill Pump https://smile.amazon.com/gp/product/B01LZ5HQ2W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Used Dual Lock to Mount…
3 Layer Top & Bottom 7 Perimeters Holes for 1/4" Bolts Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3 Infill: 100% **Filament:** Sunlu PETG Black Category: Automotive
This is slightly longer than the original, fit my mounting plate better. I could not match the corners from the original due to the printing overhang angle. Use PETG for outdoor use, loctite 401 for PETG will make a great bond, use expoxy…
This is an adjustable and lockable 1” pipe mount for the openBulletFeeder. There are improvements from the one included in the openBulletFeeder. The Bullet Feeder mount side is modified from the OBF file, so the usual fitment issues from…
Updated 5/25/2020 This was created by request, I have not tested this. Ceiling of case feeder was raised 2mm, the case ram height was increased 2mm. Original File https://www.thingiverse.com/thing:4266244 Category: DIY
These are both Flip plates for 6.5mm, will flip your nose down. They should work with just about any rifle caliber, but I have not tested it beyond 6.5. This works with my 6.5 Collator Plate https://www.thingiverse.com/thing:3547180 These…
3 Perimeters, top, bottom, side Rocker and Body need to be bonded, recommend Loctite 401 & Hot Glue https://smile.amazon.com/gp/product/B00JFLE196/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Recommend Use of Rocker Switch…
308 Plate. I have made this by request, I have not tested it. Based on my 6.5 Creedmoor Plate. https://www.thingiverse.com/thing:3547180 You will need to use my Flip plate/s for the nose down bullets.…
6.5 Creedmoor Plate. Collating these very long boat tail 6.5mm are a challenge, they like to ride above, angle your feeder at 45 Degrees, the more in the collator, the better the result. You will need to use my Flip plate/s for the nose…
This is a modification of the electronic mount from AmmoMike83's (all credit to him) OpenBulletFeeder, https://www.thingiverse.com/thing:2504314 , The Bullet Feeder mount side is modified from the OBF file, so the usual fitment issues…
3 Layer Top & Bottom 2 Perimeters Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3 Infill: 10% **Filament:** Sunlu PETG Black Category: Automotive
The 6.5 Creedmoor Drop Tube Big Switch Small Spring from AmmoMike83's (all credit to him) OpenBulletFeeder, https://www.thingiverse.com/thing:2504314 , The one included in the project has the wrong ID of 0.258. I have corrected the ID,…
The Aluminum throttle mount that came with my boat, was too wide for my Bimini Top poles, pic 4. I designed a mount that was an exact fit for my SeaStar / Teleflex CH2600 & CH2700, it provides more space along the rail and also fits…
Extended Roller Handle for Inline Fabrication ergonomic style roller levers Uses 3/8-16 x 4 Socket Head Cap Screw - Tractor Supply
To wszystkie aktualnie dostępne wyniki.
