Liczymy pasujące modele…
I really loved the concept of porgekins's Steam Deck Belly Stand Adjustable , but when I actually tried using it, I ran into a few issues. With the stock screws (which have 2.5mm of unthreaded length when the back of the channel is only…
Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…
Fixed and remixed original model to remove the Gridfinity connectors on the bottom and adjust the dimensions to comfortably fit my 5.5" x 4.5" (~140mm x ~114mm) sandpaper in 10 different grits. Tray is 80mm high, 140mm long, and 130mm…
This started as radical_rascal 's single-bottle polish holder (originally on Thingiverse ; reuploaded here ). I personally felt I could too easily knock over the single-bottle holder, but the multi-bottle holders were too crowded to…
I really love Tea Bag Dispenser - Faster Stackable Interlocking by pwnate , but it won't work for Celestial Seasonings teas, which aren't individually packaged. In my case, I not only needed to leave space for CS boxes, but I also needed…
This is a set of infill swatches to match the “35mm slide”-style filament swatches created by George. They have the same external dimensions, and the filament “window” is roughly the same dimensions and orientation as the sample image on…
This is a reupload of a design posted to Thingiverse by radical_rascal , reuploaded here with attribution per their license (and permission) These holders are designed specifically to fit Mooncat nail polish bottles, with premade sets to…
This is the “Rugged Box v3 60” for 35mm Slide Filament Samples (and also fitting my remixed 35mm Slide Infill Samples ) cut down to fit the bed of a Prusa Mini/+ or other smaller printer. There is also the option of a windowed top, so you…
I went, uh, slightly nuts with the Bauhaus Tray system and decided I wanted a dedicated spot for everything on my nightstand. There were a few items the original set and existing expansions wouldn't accommodate, so I designed holders for…
I wanted to throw a shelf on top of my new Modular 004 unit, but the only original ones were double its width, so I took the Modular 006 and 007 shelves and cut them down to the correct size. For the 007 shelf, I also made versions with…
Star Trek: Lower Decks , Season 4 Episode 2, "I Have No Bones Yet I Must Flee" The smaller size (50mm) is designed as a keychain, with a hole in the corner. The larger size (150mm) is designed as a plaque.
I got sick of digging in the lawn to pull up the sticks from burned-down mosquito incense (or trying to find a plant pot to stick them in on the upstairs porch), so I decided to print a holder. The one jurassic73 designed was nearly…
A set of 10 nameplates for Modular 004 with labels added: M3x6/8 M3x10/12 M3x16/18 M3x20/25 M3x30 M3x35 M3x40 M3 Nuts M5x12 M5 3030 T-Nuts The labels are centered horizontally and are 1mm above center vertically (to account for part of…
I needed a way to organize miscellaneous tea bags, and no current model quite met my needs. So I designed one! This caddy: Fits all standard individually packaged tea bags (Twinings, Stash, Bigelow, etc.) Yes, including the Tazo ones that…
I loved the idea of StatCat 's Square Wipe Dispenser , but the medium size was too short to hold a pack of my wipes and I initially thought the large had too much extra headroom (though, oops, I had mismeasured how tall my stack of wipes…
This is a simple hook that clips over the edge of any Modular 006 or Modular 007 shelf wall, whether the unit is an original double-width version or one of my remixed single-width ones . The back is angled 8 degrees inward to allow the…
I love our new countertop dishwasher. I did not love filling it with water, since somebody decided that the port for filling the tank should be extremely shallow and also full of things for water to bounce off of instead of going straight…
This is a simple sign requesting that deliveries be left inside the porch, for when your packages have a habit of piling up outside when there's a perfectly good covered porch, like, right there . I attached mine to the mailbox a…
NOTE: REALITY-CHECK THAT YOUR PRINT IS WATERTIGHT AND/OR SEAL IT BEFORE USING. Any FDM print is only as good at holding water as the fusing of your layers. Don't be afraid to increase your flow rate, temperature, number of perimeters,…
Just a recut of the ring from the Bauhaus Tray Coaster Holder to accommodate 4" (101.6mm) coasters, which is the larger standard size in the U.S. for cardboard coasters (e.g., like you would find in a bar). You will also need the base…
I wanted to figure out whether a particular color of filament would look better against a white or or black base, so I designed a small swatch to print all three colors together in a way that I could look at them on the same object. Is…
I really love the Roller Rapture model, but the original connector caps didn't fit my screws, which have button heads that are 9mm wide. I slightly edited the original file to make the holes 9.5mm wide, which allows a comfortable, easy…
My partner wanted something to remind her to take the pizza steel out of the oven (or put it in), so I made her a reversible magnet. I also made pizza stone versions. Round reversible magnet: Leave it on the oven and spin which side is up…
This is an extender/splitter to allow four additional items to be hung from one hook (with the original hook still available for a fifth item). It was originally designed for Command Medium Clear Wire Toggle Hooks , but the model could…
To wszystkie aktualnie dostępne wyniki.
