Liczymy pasujące modele…
It's ~40cm long in total, which seems to be the typical fridge depth. It works, mostly. I did model it from scratch, specifically to adjust the tile angle and fiddle with the supports. Sometimes they rotate while falling and jam, not sure…
For the 2W, adds a column of half-grid For the 3W, adds a 6x6. Note that the walls on either side are thinner to fit this. A stock 3W blank decor drawer is also included. Uploading as STEP-only. PrusaSlicer and friends seem to have no…
Useful if you're using an HBA and wind up with a lot of extra sata connectors. Also gives you some flash redundancy over that one 2.5 bracket that comes with the case. Hangs off of the SFX PSU and sticks to the top of the internal space.…
RepRack shelf with cutouts for both an "up" and "down" position, with a few other changes. "down" position's hole placement is identical to original These can be dropped in next to existing repracks, and are compatible with other reprack…
The use case here was a NIC and an HBA being bifurcated out of a single x16 slot. The case has 2 full height PCIe slots, but the bifurcation board adds some extra height down below. This moves the mount point to the top part of the slot,…
Magnetic bit holder that fits Makita drills and drivers. Room for 6 bits, and can magnetize a few screws underneath. Hardware: 6x3 mm magnets (0-6) M4x12 -ish socket head (1) - This can be longer or shorter. It just needs to engage the…
Contains the single bin subdivided into 2 and 4 sections, and the double bin pre-divided into 2 and 6 zones. The central spine is 1.5" wide, perfect for temporary labels with masking tape. Can be used as-is, or the feet can be printed and…
Simple snap-in mount for HS-02A. Might need a little bit of scaling +/- a few % depending on your printer. I'll make a more permanently retained variant if this winds up being problematic / I have more time.
Pretty much the same as the original, but with the flanges on either side to trap a filament spool. The threads are cross-compatible, but not a perfect match. Included a screw-on funnel to help with precision pouring.
For those of us that don't want to upgrade just for the sake of a usb-c port, I present the long boi. Depending on the adapter used, this can act as a data condom too. Current versions are up for the XS and XR - I'll take requests for…
Half-height trays for the common akro drawers. Step file included for cad-agnostic divider customization. Import the step (keeping the solids separate) toggle off the dividers you don't want, and combine what's left into two bodies. If…
It holds 2 extra nozzles over using two 1x2 holders. That's pretty much it.
Embed either a 5x3 keystone panel, or a power grommet into a lovesac side. The mount is designed to intended to attach under the cover to hide, and the panel is removable if the M3 screws are removed. I created this on my own using…
Extremely quick and dirty modification of 1W faceplates to fit on any drawer position, instead of only 1W drawers. Also a handle with a hole in it, in case you want to use something else as the handle. The .5H / 1W accents can be used as…
Use M3 3x4x5 heat set inserts for the back bracket. All holes are for countersunk M3 screws. Just over 230mm of length with the 4-slot, an additional 7mm of with the 3-slot. Recommend using ABS, since it will catch some GPU exhaust. I…
Using the original, I ran into a few issues - The heatsets are in pull-out orientation, which isn't ideal, especially if using an auto driver. The final magnet flush-ness was extremely sensitive to the heatset placement - if the heatset…
It holds ~14 C245 tips. It could theoretically hold more if the angle became steeper moving backwards, which would avoid hitting the back wall and let the rows "overlap" a little bit internally. But I don't have enough tips to justify…
Uses an STC-3028 and 100W PTC heater to cycle heated air through an enclosure until a humidity target is met. Both the STC-3028 and 100W heater can be switched for alternatives, as this form factor seems to be semi-standard. Constructed…
It's hollow inside, so you can wire something up if you want to. I didn't bother. Other hardware: 147x90 https://www.aliexpress.us/item/3256809207132616.html 6" https://www.printables.com/model/1404483-molle-stick-remix/files
It's the L1 battery from DS2. Mounts to molle. Hardware: https://www.printables.com/model/1404483-molle-stick-remix/files 6 or 7", I don't recall 4x 3x4x5 m3 heat set inserts (for each corner) 4x m3x8-12 (drives into the insert on each…
To wszystkie aktualnie dostępne wyniki.
