Liczymy pasujące modele…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments 2024-06-08 Update: I've added a 2nd version that uses Small Threat T-Bolts to attach to the Tile. This May be an alternative if you…
I tried to generate all combinations i could fit on my Bambu. Let me know if you'd like a different one. I've only printed the 2x3 and the 4x5. Update July 2nd 2024: I've added files for the bins I use. They were generated with the…
I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…
Edit : I've upload a new version of my drawer - please see version 3 3mf for an easier time! This is the new layout: Original I've finally sat down and documented my way of implementing Gridfinity Refined baseplates in the Harbor Freight…
For smaller boxes, having two hinges and latches doesn't work well. I've altered the parameters of Whity's amazing Parametric box to create a single hinge and latch at the center of the width of the box. The “Hinge Offset” parameter is no…
This model is a simple removable label for x1 Gridfinity Bins generated by Le0Michine's wonderful Fusion360 plugin. If you don't know it, check it out here - you won't regret it. If all you need are compatible bins, now i've published…
Store your Canon Camera batteries for Travel or organization! Choose the right box for the number of batteries you wish to store, and choose the proper fill for your use - there is a fill for batteries with Caps and a fill for batteries…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Hang your Dewalt Tough Cases on the wall with this easy to print and install hanger. Printed with default settings. Then i snapped…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a great circular sawholder - attaches firmly to Multiboard and fits my Dewalt 570 perfectly. May fit others - let me know if…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Update 2024-04-23: Published v2 with 2.6mm head thickness to match Part B Snaps - that way things are kept a standard distance from the tile…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a great jigsaw holder - attaches firmly to Multiboard and fits my Dewalt 334 perfectly. May fit others - let me know if you…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments I needed a spool holder that would attach to Multiboard to feed my A1Mini. I found this great model and made it compatible with…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Hangs an Angle Grinder from the Protective Sheath. I designed it for my Dewalt DCG416 but likely works with others. The Radius of my…
2025-06-23 Edit : Added version 2 with less slack. Accurate printers should have a remote that closes snug. Original: Same great remote as @TheStockPot made, but with two significant changes. I've added a way for the remote to be closed…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Store your Dremel on the wall with this easy to print and install hanger. Printed with default settings. Then i snapped it into my…
Organize Sandpaper in your Gridfinity Storage shelf/drawer
A gridfinity bin for my Mitutoyo Calipers (500-197-30). Click here for an Affiliate link! It also has storage for the Mitutoyo 6"/15cm Steel Rule . The top part will work in PLA, but i printed it in Overture TPU . The bottom part was…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments The original bolt was extended by 4.5mm and a screwhole is provided through the bolt. The goal is to be able to screw this into the…
Gridfinity bin for a Chipquik SMD29130cc flux syringe and up to four needles (which i lost, but the holes are there and i hope they fit).
Protect your camera lenses! As a travelling photographer i needed a way to protect my lenses so that if htey get thrown around a bit the lenses are still safe. I am slowly adding more lenses to this - please send me a message if you'd…
Update: I have designed a new and better drawer layout. You can check it out here. ----------------------------------------------------------- The drawers for the US General v2 Toolbox fit Gridfinity baseplates in a 13x11 layout. On the…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a simple holder for the Dewalt 90degree Drill Adapter sold by Home Depot. Printed with default settings. Then i snapped it…
Update: I have designed a new drawer layout. You can check it out here. ----------------------------------------------------------- This is a finish for the US General Cabinet - 26" v2. The Drawers fit 13x11 bins and will have 20mm on the…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here!
Update 2024-07-11: New lid and fill for the 25mm 1.7 lens. Protect your camera lenses! As a travelling photographer i needed a way to protect my lenses so that if htey get thrown around a bit the lenses are still safe. I am slowly adding…
Tried to make the most versatile Canon Lens cap possible: Works on RF Lenses Works on EF Lenses Does not require strict orientation when putting cap on lenses, both RF and EF. Has a very minor "bug": when you remove the cap it is possible…
Simple 1x1 bin for the AliExpress “ 3PCS Hex Countersink Boring 90 Degrees Countersink Drill Bit for Woodr Metal Chamfer Cutter Chamfer Metal Drilling Bit Set ” I purchased from this link:…
This model attaches to cheap timers you can buy by the dozen. https://www.amazon.com/Classroom-Timers-Teachers-Magnetic-Digital/dp/B07RPT4LFN/ref=sr_1_6?crid=L9FI8M9PBO2K&keywords=timer&qid=1707262403&sprefix=timer%2Caps%2C159&sr=8-6&th=1…
Description I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Remove the Belt clip and attach this model! You'll need a slightly longer screw, but it's that easy!
There are two designs included in this Model. The first one, called Actual Size, is 60x48.2x2.2mm as shipped from ThePrintCodex. The other one was created with tolerances so that it could be used as a cut tool in Fusion360 (I was…
I was looking for a solution to automate the use of the BentoBox v2. I decided to use the nozzle temperature as a parameter since i could differentiate between OFF, PLA, and ABS/ASA/NYLON based on temperature. Currently i run it during…
The included 3mf file has a pause inserted at the last layer before closign the holes. During that pause, add 16 heavy balls to hte holes. The model will continue to print and close off the holes, making the base weighted.
This model follows the original model's design language but triples the capacity to 108 PCX chips on a 4x5 Gridfinity bin. It also removes the 2nd hole in the magnets (originally intended for a screw?) and lowers the tolerance to 6.2mm.…
To wszystkie aktualnie dostępne wyniki.
