Liczymy pasujące modele…
*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** I found a great plug cover on Thingeverse for XT-60 plugs. The original files didn't have a large enough retaining pin…
*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** Uploaded with the permission from the designer named ZEE FLY GUY from RC Groups.com Thread link :…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Very basic and simple stand to lift the tires off the shelf to keep them from getting a flat spot. Use as stand alone or join with 3/16" dowel. Lay on it's side to print. Do two at once and you have a set. Print Settings Printer Brand:…
I needed a simple strainer for a specific application so I created this. For my needs it works real well. Made with generic PLA at 20% infill
I got tired of having no place to store the lubricant tube that comes with the spray can so I created my own little design. It's effective and quick to print. I've made it a bit undersized so it should be able to be used on various…
*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** I re-sampled the original cowl so it would match and fit the original on the E-Flite 1.5m Texan. I added a support ring…
I don't like to glue my 9 gram servos in place for flaps or ailerons in case I ever have to remove one so I came up with a little mount and plate. I glue the plate in place , put the servo in a mount and attach it all with servo screws.…
I prefer to glue a tray in place and then attach the 9g mini servo using the screws that came with it. Makes for a quick and clean instillation and removal if necessary. Printed with PLA @ 40% infill. It's users choice…….
The original designer wasn't sure if it fit a 2022 Hyundai Venue “ Essential ” and I'm happy to say it does. He did a great job designing this. I printed it with “ supports touching build plate ” with generic PLA @ 70% infill. I'm not…
It's quite a long print but I like it because any loose papers won't fall over. It holds regular sized file folders, 8 1/2 x 11 papers and miscellaneous product items like labels etc. Printed with generic PLA @ 15% infill
Reworked one I found elsewhere because the measurements were not to my liking. I didn't compensate for the down thrust on the motor but other than that it fits like a glove while still using the spinner. The original didn't either. ( did…
It will help hold the plug in place while soldering on the wires. When I do my soldering I always keep the male and female together in case things get a bit hot. That way the pins always stay in place and don't shift. The plug just slides…
Manufacturer doesn't like to carry stock so this solves that problem. I printed mine with PETG only because I had some laying around. I'm sure any other type of filament will work just fine. I used 100% infill and supports touching build…
I don't like to use adhesive or suction cup mounts in my vehicle so I designed this to fit in the console pocket in my 2017 Hyundai Tuscon. Printed it in two parts with Prusament PLA. The main stand requires supports and in order to add a…
I designed this simple cooling vent to be used on my Arrows Marlin and without being scientific it does help keep the battery much cooler. Along with the vent I made a template to allow for a perfect fit. Simply hold the template where…
Makes servo instillation and removal easy once the tray is glued in place. Printed with regular PLA top side flat on bed. No supports and you choose the infil. I do mine at 100%.
Fits my 2200mah 50c 3S batteries laying flat. It has an inset on the bottom and sides to allow for placement of a Velcro strip. Printed in PLA @25% infill. It printed the holes fine without support. Simply glue it in the spot of your…
Each side is made for it's coin size. Will hold 45 of each. I have an inset on each side that is marked with a felt pen at the 5 mark. Unfortunately I can't separate the levels with a colour 's because the coins are a different thickness.…
I am doing a Canadian livery on my Eflite AT-6 and wanted an exhaust pipe to help it look more scale like so I designed this. Printed @ 20% infill with supports “ touching build plate only”. Print it laying down as shown in the pics.…
I use these on the end of a discharged battery so I know which ones to charge when I get home. Red seemed to be the appropriate colour for that considering I don't want to accidentally plug in a discharged battery. A friend preferred…
A simple yet long print done on my MK4 with generic PLA. No supports and at 15% infill. I have other variations located here: https://www.printables.com/model/559216-steak-knife-holders/files
2/23/2024 - A new one piece improved version is available here.. https://www.printables.com/model/778197-pen-holder 12/03/23 - I cleaned it up a fair bit. It now goes together quite a bit cleaner. All holes are now the same size. New…
I use these on my plugs after I've flown and discharged them. That way I don't get confused as to which ones need charging or which ones are full. Normally I would just print them in red to bring it to my attention but this time I printed…
Acts as a hold-down if you happen to break one of the tabs. Simply clean up what was left of the tabs in order to leave a smooth surface. I used servo screws and drilled the holes accordingly. Once the screws are added it seats nicely and…
I didn't want to throw my new steak knives loose in a drawer with a bunch of other items so I made a holder that will sit nicely on my counter. Printed with generic PLA at 20% infill. It's quite a long print ( 20 hrs ) but well worth it…
I designed this simple cooling vent to be used on my Arrows Viper and without being scientific it does help keep the battery much cooler. Along with the vent I made a template to allow for a perfect fit. Simply hold the template where you…
Fits my 2200mah 50c 3S batteries laying on edge. It has an inset on the bottom and sides to allow for placement of a Velcro strip. Printed in PLA @25% infill. It printed the holes fine without support. Simply glue it in the spot of your…
While I'm designing something numerous times I need a quick example of how thick something will be so I made up a set of 8 “ feeler ” gauges from 1mm - 5mm. Sizes are: 1mm - 1.5mm - 2.0mm - 2.5mm - 3.0mm - 3.5mm - 4.0mm - 5.0mm I made a…
I just purchased a LazyBoy recliner and found the lever for the foot stool was set too far down so I came up with this little adapter to make things easier. It especially helps with my arthritic hands and makes raising and lowering the…
I don't like to store my salt and other kitchen products etc in their original box so I came up with a top that will friction fit into a 710ml pop bottle. Now I store my salt and baking soda etc. where it's kept dry. The top has a hole in…
I wanted something I could get a grip on in order to remove some of the canopies on my RC airplanes instead of the usual tape applied at the factory. They needed to be small enough in order to keep the appearance clean and they needed to…
To wszystkie aktualnie dostępne wyniki.
