Liczymy pasujące modele…
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Steam locos need coal. This skip truck is an add-on to your coaling station and is used to replenish the steam locomotive's coal reservoir. You need also 2 H0 gauge axles which fit to the small tracks of the coaling station. I used…
Unfortunately one of my chimney hats was blown away by the wind and got lost. Therefore I created this slightly simplified replacement part which fits perfectly onto the chimney of the POLA G roundhouse. Please note that original POLA G…
Some handles of my POLA G roundhouse doors was broken. So I created this replacement part. For easy printing without support, I split it in 2 parts in my slicer. Please note that original POLA G spare parts are available from Gebrüder…
Easily add magnets to the axle to keep your loco's chuff in sync: The wheels and gear do not need to be removed from the axle No fiddling with glue and screws The position of the magnetic wheel can be adjusted after installation What you…
Easily install a lamp inside your car. Fits on the screw socket on the inside of most LGB roofs Update - 2 variants available now: for 25mm and 26mm distance between the screws Fits for a 6.5mm LED (e.g. mXion lamps coming with integrated…
Easily add sound to your G scale loco with this mounting device for a mXion SX6 DCC sound decoder : Screw the holder into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no double-sided adhesive tape…
While the model of the Rügen Kleinbahn 52 Mh (LGB 28005) had a cover plate included by the factory, LGB forgot/ignored this detail for the 53 Mh (LGB 28006). Anyway, I wanted some details for my boiler's backhead while not muting the…
Easily chip your G scale loco with this mounting device for a mXion Drive M DCC decoder : Screw the holder into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no double-sided adhesive tape or hot…
The original Firebox of a LGB steam Mogul loco comes in a version either having the door closed or no door at all to have a good view to the fire inside. The original snapped in part can be easily replaced by this enhanced one. It looks…
To keep the doors closed during strong winds, I added this lock. To make closed doors visible, it includes a stop signal. The lock is just clipped onto/from the track by bending the two handles - be careful as the construction is not too…
The Märklin mfx decoder programmer 60971 and its decoder adapters and decoder tester come out of the box as PCBs with wobbly connectors. Therefore I designed cases with the following features: a case for the MTC21 / NEM652 decoder adapter…
LGB Vanderbilt tender rear steps easily break, the cover easily get lost. The original parts are no more available :-( Therefore here are the replacement parts :-) The parts have been designed to be as close as possible to the original…
Enhance your sound by this speaker box. It fits in the LGB 26851 and technically identical mallet steam locos without modification of the loco.
Easily chip your G scale loco with this mounting device for a mXion Drive L DCC decoder : Screw the holder into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no double-sided adhesive tape or hot…
Only one of my skip trucks has a bracket to hook it to the crane. Therefore I created an additional bracket for the second truck. May also be used as a replacement part. Please note that original POLA G spare parts are available from…
Easily chip your G scale loco with this mounting device for a LGB 55027 DCC decoder : Screw the holder into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no double-sided adhesive tape or hot glue…
Unfortunately, the two LGB GGw and OOw cars are somewhat small compared to the other LGB rolling stock. With these alternative mounts, the car can at least be raised a little by 2.25 mm. You need 4 PT 2.2 x 6.5 mm screws which replaces…
Fits into various G-scale buildings having a workshop, e.g. Pola G house kit #331073 or Pola G gas station (like #331630 or #331735). The adapter part is intended to be glued under the forge (print the adapter upside down). Optionally,…
Another storm, another damage :-( Another replacement part :-) This replacement parts are mostly identical to the original hinges. Besides a few non-functional differences, the wall mounts have a rounded edge so that the gate can swing…
Easily add a SUSI interface to your G scale loco with this mounting device for a mXion SSM SUSI Converter/DCC decoder : Screw the holder into your locomotive. The module is simply clipped in and can be removed for maintenance (no…
New version of the initial model of the case . Now having air vents as the device may get quite warm. Additionally, the case has a small guide to help you insert the optional ‘Tag Connect’ cable into the socket in the correct orientation.…
The LGB 20981 loco comes fully featured with lights, smoke, mfx/dcc decoder including sound. Nevertheless the lightweight and short engine is missing an energy buffer to be a good runner. The LGB 55429 energy buffer fits best where the…
Easily add lights to your G scale rolling stock with this mounting device for a mXion GLD DCC function decoder : Screw the holder into your car (I used filament snippets instead of screws). The decoder is simply clipped in and can be…
Custom add-on parts for the LGB Mogul steam loco to install an ESU 5L LokSound decoder as well as a speaker. The holder My goal was to keep the loco in its original state as much as possible, i.e. the built in electronics remain in place…
Easily chip your LGB Alco diesel engine with this mounting device for a LGB 55029 mfx/DCC decoder. The device fits into older loco versions like 2055/2155S/20560 having no weight on the chassis behind the cab. It comes in 2 parts: one to…
Easily chip your LGB Uintah steam engine with this mounting device for an ESU LokSound 5 XL decoder as well as a connector board (40 x 60 mm). The device fits where the factory-fitted soundboard is intended. Happy LGBing!
Find some replacement parts and easily chip your 2-4-2 steam loco with the PCB replacement for a mXion Drive M decoder : Screw the replacement into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no…
Easily chip your G scale items with this mounting device for a mXion FSD DCC decoder : Screw the holder e.g. into a building etc. (use the optional spacer where required). The decoder is simply clipped in and can be removed for…
The roundhouse needs a level standing surface. As my surface is not perfect, the doors have jammed on the tracks. Therefore I used these add-on parts to level the building. The corner parts need to be mirrored if required. You can also…
To protect the roof from wind (which may blow it just away), I added inner side-brackets to keep the roof in place. Print 2 as is and 2 mirrored (i.e. you need 2 parts for each side of the roundhouse) Note the angle for the roof slope.…
Easily add sound to your G scale (or smaller) loco with this mounting device for a Decoderwerk 70101 DCC sound decoder : Screw the holder into your locomotive. The decoder sits in the covered case and can be removed for maintenance (no…
LGB is known for its good quality. However, the holders for the weight in the tender of the 2-4-0 US steam locos tend to break (e.g. when the train set is shipped, as my tender arrived having broken holders). I was able to glue the…
Easily chip your POLA G railway barrier (old version) with a mXion MDC DCC decoder. Slide the decoder into the holder. The support part ensures the holder does not get in touch with the mechanical parts. No double-sided adhesive tape or…
Easily add a LED to the firebox of your 2-4-0 US steam loco (model numbers 2x232, also sold in various starter sets). Print the part using transparent filament. Remove the built-in brim. Insert an orange 5 mm LED into it. Insert the part…
Easily convert your LGB Automatic side dump car to DCC with this adapter for a Massoth single channel accessory decoder : Screw the adapter onto the chassis (use one of the existing central screws). The decoder is screwed onto the adapter…
To wszystkie aktualnie dostępne wyniki.
