Liczymy pasujące modele…
Attachment for papertowels stick to the HSW. Two stl-files, holder and pin, useable for both sides, they're symetric. Pin diameter is 40mm, that's slightly bigger than 1 inch 9/16. I use rolls 260mm wide and 115mm diameter. It will hold…
I needed some more hinges like the one in the front for a alu-extrusion construction, size 2020. The hinges are mounted with some countersunk screws M4x8mm and matching hammerhead nuts. The hinge itself uses two identical parts, which are…
Maybe you need to turn the model 90 degrees in x-direction in your slicer. I used PLA, PETG will work also. 0.2mm layer height, 3 perimeter. Nozzle 0.4mm, 20% infill.
https://www.az-delivery.de/blogs/azdelivery-blog-fur-arduino-und-raspberry-pi/internet-radio-mit-dem-esp32?_kx=sRfYoB9iNFS8Zy1KMoJo4iW-r4VDCdD6ykGkGz4V1sU%3D.QVRJMi&utm_campaign=250124_DIY-Internet-Radio%2BBlog_promo_Projekt_legitimate-int…
drawers with a different size. The mainframe is like the 005_main, but it takes only three by three drawers, which are now as high as the 001/ 002 drawers. There is a drawer for single separator and a double separator use and a drawer…
Layer height 0.2mm, Nozzle 0.4mm, change Filamentcolor after the first five layers
lika a drop of water 0.20mm layer, 0.40mm nozzle, 15% infill, organic support.
Attachment for the HSW. It will take two cans with max. diameter 53.5mm (400ml 3DLAC, 300ml WD40, 150ml Wuerth maintenance spray, ca glue activator spray etc.). The bottom of the holder is a honeycomb pattern as well. Easy printing, no…
mostly every owner of a makita pj7000 knows the problem with the vac hose connection - it doesn't fit to most european vac models. So i made this part here, just open the lid like for changing the sawblade and pull out the adapter. You…
Allenkey (1.5mm to 10mm) and torxkey (T10 to T50) holder attachement for the HSW. I used galaxy black PLA. Because I wanted a nice print I used some organic support for the brandname “Stier” and 0,2mm only for the first layer. All others…
Use it for holes at the end of a 2020 extrusion to accept a 4mm allen key to tighten a ISO 7380 screw, which holds another 2020 extrusion perpendicular right to the end for a nice corner. PETG used, slicer settings are: 50% infill, 4…
I needed this Drawer with three compartments and I want to keep it flexible.
Layer height 0.2mm, Nozzle 0.4mm, change Filamentcolor after the first five layers.
Fanadapter for mounting an external 80mm fan onto a 2.2Kw chinese cnc-spindle instead of the original fanblade. This lowers the noise level a lot. You can also run the fan for a few minutes after stop milling for more effective spindle…
another holder for my HSW; printed in several parts and glued together with ca glue. Print with any filament you like, I used PLA+ from Sunlu, 0.2mm layerheight.
Stacked to the HSW with two additional insert-empty ( https://www.printables.com/model/152592-honeycomb-storage-wall/files#preview.file.hfmi2 ) this holder carries three small bottles with a max. diameter of 31mm. Bottom ia a honeycomb…
To wszystkie aktualnie dostępne wyniki.
