Liczymy pasujące modele…
I needed an adapterplate to mount an older NUC behind a VESA monitor. The mount is capable of using the 100mm by 100mm and the 75mm by 75mm patern for VESA arms/holders and monitors, and it supports the 85mm NUC mount spec. the NUCs can…
This is a small mount for the caravan awnings. not much to say besides: print in something sturdy and UV resistant (PETG or ABS) use at least 4 walls and 25% infill the photo is of our Tabbert comtesse, i made that part to replace a…
people, gather around! i present to you: the “Shove'n'pull” drink can helper tool! For those of you whos fingers are either too small, too big, too cold or too sick to grab the tab lid of a can, or those who have too long or too short…
SECOND VERSION of my VESA twin mount pIate! I added a whole for thermal problems and included clip on cable management brackets. Needed an adapterplate to mount an older NUC behind a VESA monitor. The mount is capable of using the 100mm…
if you need just one or two cablemounts, but your local hardwarestore only sells them by the boxes use PETG or a filament with similar properties.
Our hanging sliding doors in our vintage camping trailer came lose, and i discovered that the hinges were broken. i redesigned my own versions (30 instead of 20 mm), and they work great in our camper. use between 50 and 90% of infill, i…
This sign was inspired by a simpsons episode. It will tell your visitors exactly what to do.. or don't. designed in 170 x 150 mm, so it should fit on small bed printers like the A1 mini. you don't really need a multi color system, just…
Sign reading: “WARNING THIS SIGN IS A DISTRACTION" It's perfect to divert the attention of your visitors, wanted or unwanted. you don't really need a multi color system, just insert a pause command ca .75mm from the top layer and change…
🇩🇪 Retro Konsolen Conversion-Kit für HP ProDesk / EliteDesk G3–G5 Dieses Conversion-Kit verwandelt deinen HP ProDesk oder EliteDesk Mini (G3–G5) in eine stylische Retro-Konsole – perfekt für Fans der 70er, 80er oder 90er Optik. Der Umbau…
Dieses Modell ist ein externer Filamenthalter mit Führung für den Creality K2, K2 Pro und K2 Plus, ideal für große und schwere 2,5–3 kg Filamentspulen. / This model is an external filament spool holder with guide for the Creality K2, K2…
A mead horn stand with simple geometry. The wider side fits 60mm wide horns (the open side of your horn should have a 60mm diameter in its “wider” third). original model by me. Pictured prototype printed on a (kind of uppety) Sovol SV07…
Hier findet ihr die von mir konstruierten Einhängstücke für Selbstbauspriegel auf einem PKW Anhänger mit 30mm Bordwand. Sie sind so ausgelegt dass man die Breite individuell mit 30 x 50mm (die real immer 28 x 48mm gesägt sind) Dachlatten…
I needed something to fixate the cat scratching board to the drywall. The screws would work themself through the materials when the cat (that fat little fluffball) would have a go at the board. Standard washers werent really working, and…
I bought the (in)famous Zonestar Z8PM4 multi color printer to tinker with it. Rewiews were not great, but i wanted to see how far i could bring it. Welp, the configuration that has been delivered was pretty bad. I upgraded many parts,…
This is a dust cover for the Zonestar 3D multi color printers of the Z8M4 and Z9v5 series. It should work over all iterations of those models, and all printers who use the same panel (Zonestar 4.3 Inch panel). You can also use it to…
This is a loading helper for the widely used umarex 4.5 (.cal177) XBG BB gun. according to online information i found the mags fit into the UX TDP as well. Print the funnel part standing on the wide ring and use a support (only from…
This is a mount for my SA XD-E “plinker” - the cal.177 BB gun. The BB version of the XD-E should have the same measurements as the .45 ACP or 9mm version, , so the mount should work for those too. Also, AFAIK the XD (without E) series…
Not much to say here. the Zonestar Z8PM4 is famous for flinging its printing debris into its own fan. so i designed this little cover. it should work for all places where the screws are 70mm appart diagonally, 49,5mm vertically and…
These are feet for the corsair carbide series cases, to get a bit of lift under the case. This way it is possible for the PSU to suck in more air from under the feet, because there is more clearance. I've tested them with the Carbide 100R…
I designed this little dirt shield for the Zonestar Z8PM4 Pro (i have the MK2.5 variant, other variants mai work if they have the same PSU at the same place). The PSU fan is facing up, and the print bed will move over the fan - under…
This is my “ adaptive cable channel ” system in different lenghts from 100 to 500mm (50mm increments) measurement: 80x60mm, different lengths (hence “system8060”) every channel has a litltle bridge to pull cable ties through, and tie some…
This is my very first model: the base part is a mount for those cheapo aliexpress thermometer/hygrometer instruments to mount them above the Z-axis. The top part is a remix of Charles Timkos fancy base gridfinity model. Made for the Sovol…
This is a very variable notebook stand. you can take it apart and store it in your laptop bag. i also included files for different lengths of levers (30,50,70,90, 110 mm) so you can vary the heigt. also works as a stand for a tablet /…
With this little thingamaboob you can mount your TWO TREES filament dryer box on top of your Bed Slinger or CoreXY printer, so you can print directly from above out of a drying device! no need for an additional rack above or behind the…
Deutsch Kornschutzbügel / Frontvisier für die Alligator Pistolenarmbrust Dieses Modell ersetzt den originalen Kornschutzbügel bzw. das Frontvisier der Alligator Pistolenarmbrust. Es eignet sich als Ersatzteil für beschädigte oder…
My multi color printer is in my basement, and i am designing my prints usually in the living room. On more than a few occasions (especially when i had nothing printed in a few days or even weeks) i forgot what filament colors were sitting…
My desk is not that big but has to accomodate a 32in monitor, a laptop stand and a headphone holder somewhere, so i bought a BRAMLEY Power monitor mount, and designed this holder for the central tube. inner diameter is 35,2 mm, so if…
🇩🇪 Deutsch Dieser Trichter wurde speziell für die Etekcity EK5250 Küchenwaage konstruiert und erleichtert das präzise Abwiegen von Filamentresten aus dem 3D-Druck. Die runde Aussparung an der Unterseite ist exakt auf die Wiegefläche der…
Diese Halterung ermöglicht es, ein Katzenkratzbrett (Sisalbrett) bequem über eine Ecke zu montieren, ohne auf beiden Seiten bohren zu müssen. Die Konstruktion sorgt für stabilen Halt und einfache Installation - perfekt für Wohnungen, in…
TPU-Schutzkappen für Holz-Gartengarnituren Diese Schutzkappen wurden für die Beine der iWerk Massivholz-Sitzgarnitur entwickelt und aus TPU gedruckt. Die Maße der Füße sind 90x35mm, andere Modelle die ähnliche Fußkonstruktionen haben…
Veteranenkreuz stilvoll präsentieren Mit diesem 3D-druckbaren Halter lässt sich das Veteranenkreuz der Bundeswehr inklusive der zugehörigen kleinen Schatulle an einem Bilderrahmen befestigen. Der Halter wurde speziell für Bilderrahmen mit…
🇩🇪 Deutsch 🔥 RHZ Festival Logo – 3D Druck Modell (Rockharz) Dieses 3D-Modell zeigt die markanten Buchstaben „RHZ“ – inspiriert vom legendären Rockharz Festival . Perfekt geeignet als Deko für dein Auto, dein Camp oder deinen…
To wszystkie aktualnie dostępne wyniki.
