P
PrintablesYourigh
120mm fan holder for Modular Mounting System
Fan holder for GoPro/MMS attachment. You can get the base here (one on the picture) or a larger one here (180mm to fully use Prusa Mini).
- Pobrania
- 568
- Polubienia
- 95
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesYourigh
Hex phone holder + holes for speaker
Remix: * loaded to Fusion360 * adjusted bottom holes - speaker port * Printed with PLA
- Pobrania
- 524
- Polubienia
- 56
- Ocena
- 4,8
P
PrintablesYourigh
Envelope embosser - customizable
Embosser for envelopes. You just push it between hands, or against the table and it embosses the pattern well. To adjust the letters, use the Fusion 360 source file or STEP file. Some clearance is needed between positive and negative part…
- Pobrania
- 464
- Polubienia
- 214
- Ocena
- 4
P
PrintablesYourigh
Metric Radius Gauge
I found this gauge that looks the best of all. Internal and external radii and plenty of options. Practical assortment on key ring or string. Adjustments Added stencil font and values extruded through. Removed value (mm) Unified text…
- Pobrania
- 383
- Polubienia
- 48
- Ocena
- 5
P
PrintablesYourigh
Razor knife / bread lame M4
Remix of original model. Changes: place for razor made only 1 layer (0,2mm). Typical razor is 0,1mm. Changed for M4x10 bolts and nuts Added 0,2mm notch for better bridging on the hole. (not printing the hole diameter mid-air) Cap stayed…
- Pobrania
- 382
- Polubienia
- 66
- Ocena
- 5
P
PrintablesYourigh
HDD Grinder
Look what I did to your hard drive! - this can serve also as a nice prank. Recovery of data not guaranteed (aka impossible). Why HDD grinder? If you don't have full workshop and you just need to sharpen a drill bit or, round edges on…
- Pobrania
- 352
- Polubienia
- 276
- Ocena
- 5
P
PrintablesYourigh
Wrench organizer (print in place hinge)
PLA works fine for print, however PETG would be bit better as it is less brittle. I printed in PLA. Clearances in hinge are quite big (0,6mm from each side).
- Pobrania
- 351
- Polubienia
- 68
- Ocena
- 4
P
PrintablesYourigh
Tripod thread lock nut/barrel (1/4-20) customizable, variable size
The thread is loosened by 0.2mm, to allow for printer tolerances. Nut fits well on machined counterpart. Printing directions: 0.1mm layer height () 15mm diameters Increase vertical walls to 5 so no infill is left larger diameter 1…
- Pobrania
- 302
- Polubienia
- 41
- Ocena
- 5
P
PrintablesYourigh
Cable hook for command tape
Area for the command tape is 28x16 mm. Cable diameter up to 6mm works. Adjustment is possible in the main sketch
- Pobrania
- 297
- Polubienia
- 22
- Ocena
- 4,8
P
PrintablesYourigh
Sock clip hanger / věšák na sušení ponožek
Inspired by this design: https://www.prusaprinters.org/prints/53299-sock-clips-improved-v3-for-drying-rack Adjusted: Diameter to for ~12mm rod (metal drying rack side bar) and ~14.3mm rod (main frame) Shape of hooks - prints as 2 lines…
- Pobrania
- 208
- Polubienia
- 62
- Ocena
- 5
P
PrintablesYourigh
Radiation shield for Xiaomi Mijia thermometer meteostation / no supports
Radiation shield or sun shield for Mijia thermometer. I was using this thermometer for about 1,5years outside (-10°C to 45°C) under simple PLA 3d-printed roof and it worked well (despite that it should be indoor one.) The roof was…
- Pobrania
- 177
- Polubienia
- 34
- Ocena
- 5
P
PrintablesYourigh
Ikea Vesken hook
Hook just simply inserts to the holes on the shelf. Hook fits to the holes that are on the side (middle ones are smaller).
- Pobrania
- 160
- Polubienia
- 37
- Ocena
- 3,33
P
PrintablesYourigh
Clip for Stokke Flexi Bath storage
Clip for Stokke Flexi Bath - Fold the bathtub and insert it into the clip. - Enjoy your space-saving solution for storing your Stokke Flexi Bath. Print PLA 3 perimeters bit denser infill (I used adaptive cubic 30%)
- Pobrania
- 160
- Polubienia
- 13
- Ocena
- 5
P
PrintablesYourigh
Hook for command tape
Size of the base: 17x30 mm 20 minute print - PLA. No supports. Holds super well - I put my ukulele on it and it is there for past 2 months.
- Pobrania
- 152
- Polubienia
- 21
- Ocena
- 5
P
PrintablesYourigh
IMP441 microphone reference model
IMP441 microphone module model. Lengh of the legs match a header and pin combination. End of the pin should be aligned with the bottom of the board.
- Pobrania
- 145
- Polubienia
- 12
- Ocena
- 0
P
PrintablesYourigh
Thread/wire bobbin spool
Small spool made in two parts that snap together. Usually, no glue is needed.
- Pobrania
- 136
- Polubienia
- 22
- Ocena
- 5
P
PrintablesYourigh
Wet wipes lid - stronger joint
non-print in place, stronger and tighter joint.
- Pobrania
- 124
- Polubienia
- 7
- Ocena
- 4,5
P
PrintablesYourigh
TS100/Pinecil stand
My take for the remix of popular soldering iron stand. Inspired by JBC stations, I added a silicone wipe to wipe off any sticking components etc. There are 2 parts Main Lid - lid for the ballast area The print itselfis generally pretty…
- Pobrania
- 112
- Polubienia
- 49
- Ocena
- 5
P
PrintablesYourigh
Keys hook under the shelf
Prints without supports. The print orientation is shown on the picture. PLA works well and is sturdy enough. To be sure I increased perimeter count (from 2 to 4) using a box modifier in prusaslicer. If you have command strips around,…
- Pobrania
- 103
- Polubienia
- 15
- Ocena
- 5
P
PrintablesYourigh
Play dough roller set - adding new on request
Play Dough & Kinetic Sand Texture Rollers A collection of texture rollers designed for play dough, kinetic sand, and soft clay . Each roller creates a continuous pattern as you roll, making roads, landscapes, animals, and decorative…
- Pobrania
- 93
- Polubienia
- 27
- Ocena
- 5
P
PrintablesYourigh
4.2" e-paper desk stand
Epaper dashboard The design is used to run zivyobraz.eu service, where you can define anything on e-paper displays (calendar, date, sensor data, home assistant data, etc..) Model variants Sensor attachment can be done in 2 ways - 2…
- Pobrania
- 90
- Polubienia
- 16
- Ocena
- 0
P
PrintablesYourigh
Wrinkle spiral vase / pot insert
I recommend to increase extrusion width to 0,6mm (0,4mm noozle) to have bit more stiffness. Wrinkles add the stiffness even more. Scale as you need. Original dimensions are: 80.8 x 80.8 x 108 mm Vase printed in spiral vase mode - models…
- Pobrania
- 70
- Polubienia
- 17
- Ocena
- 5
P
PrintablesYourigh
Parkside PAPS 204 A1 reference model
Approximate model of the 4Ah Parkside battery.
- Pobrania
- 62
- Polubienia
- 8
- Ocena
- 0
P
PrintablesYourigh
Music box reference model
I ordered couple music boxes to make various toys from. As a first step I made this reference model to get the dimensions right. Enjoy. Exact model I got: https://www.aliexpress.com/item/1005005501848692.html
- Pobrania
- 62
- Polubienia
- 10
- Ocena
- 0
P
PrintablesYourigh
Groove spiral vase / pot insert
I recommend to increase extrusion width to 0,6mm (0,4mm noozle) to have bit more stiffness. Wrinkles add the stiffness even more. Scale as you need. Original dimensions are: 92 x 92 x 80 mm Vase printed in spiral vase mode - models with…
- Pobrania
- 61
- Polubienia
- 14
- Ocena
- 0
P
PrintablesYourigh
Pinecil or TS100 solder tip stand/box (Fusion360)
Small box and stand for soldering tips for Pinecil or TS100. The case is designed for short tips (88 mm length). Adjustment for longer tips: In case use have “normal” (105mm long) ones you can adjust the model in following ways. adjust…
- Pobrania
- 60
- Polubienia
- 6
- Ocena
- 0
P
PrintablesYourigh
Hook/Clip for Ninebot ES Series (use original bolts)
Slice this model in prusaslicer - there are 2 negative volume cylinders. Remix for hook, to use original bolts. M4x12. Print in PETG, set perimeters to 8 to achieve solid infill. The perimeter lines will also make it stiffer than solid…
- Pobrania
- 59
- Polubienia
- 7
- Ocena
- 0
P
PrintablesYourigh
Kitchen plinth kickboard clip - parametric
Clip for cover board (usually plastic with groove), that covers the bottom and legs of kitchen cabinets. If needed, adjust dimensions in fusoin360 in the first sketch and extrudes. Print: I recommend PETG, for its flexibility.
- Pobrania
- 58
- Polubienia
- 10
- Ocena
- 0
P
PrintablesYourigh
Table shelf legs (or monitor stand) quick print
Table shelf or a monitor stand from scrap wood. Stop over to furniture store (we all know which one I mean) and pick up some scrap board (mine is from hardwood cabinet). Then just print legs and the stand is ready. There are 2 designs:…
- Pobrania
- 52
- Polubienia
- 18
- Ocena
- 0
P
PrintablesYourigh
Thule Urban Glide 2 bassinet alignment helper
When inserting the bassinet on Thule urban glide 2, it can be stuck at the wrong spot - the holder in between the fork on the bassinet The pictures depict the older version of the aligner. I did not take a picture of the new one before we…
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesYourigh
Automatic nozzle cleaning (Prusa Mini)
Alternative way how to clean the nozzle (in 30s) This method uses the stickiness of filament to catch stuck filament from the nozzle exterior. Prints small disc (as in 3mf file) Extrude 25mm of filament with nozzle 0.5mm from the bed.…
- Pobrania
- 51
- Polubienia
- 13
- Ocena
- 0
P
PrintablesYourigh
Foamcore box: Filament dryer on heatbed
Transform your print bed into a cost-effective filament dryer with this foamcore box! Easily assembled from 3mm foamcore and 3D-printed corner pieces, it features an adjustable vent for optimal moisture release. Use it to dry filament…
- Pobrania
- 48
- Polubienia
- 13
- Ocena
- 0
P
PrintablesYourigh
Child lock for Ikea ALEX drawers
Print Simple PLA is sufficient, print in 3 parts, no supports are needed. The latch usually works well without the supports. Additional hardware optional 2mm diameter rod - you can use piece of filament instead and glue it in place small…
- Pobrania
- 47
- Polubienia
- 9
- Ocena
- 5
P
PrintablesYourigh
Maker Badge case v2
Maker badge case You can choose from multiple versions: sMakerBadge-case: Big battery compartment (no additional dividers) MakerBadge-case-SmallBat: has a s mall battery compartment so Original Li-Po battery fits here and is nicely…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 4,75
P
PrintablesYourigh
RPi4 tower case (hide ALL cables) + optional SSD plug
I have a home assistant server made from RPi4 and it was quite messy with all the cables. So here is an unique case, that hides then in a way, that all come from back side. The housing offers a bit of space for using the header pins -…
- Pobrania
- 44
- Polubienia
- 9
- Ocena
- 0
P
PrintablesYourigh
Flux syringe cap
I designed this cap as a second version, because the first one broke. It was only a snug fit, whereas the new one has cutout to keep the pastic flexible when pushed on the syringe diameter. Adjustments: via Fusion 360 file or scale in…
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 5
P
PrintablesYourigh
Bench Power supply enclosure (laptop adapter)
Power supply made from laptop adapter (adjustable to 25V). WZ3605E DCDC module and banana terminal . Power cord goes directly to laptop power supply. Printed in PLA, in 3 parts. One M3x8-15 bolt and M3x4x4 thread insert is needed for…
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesYourigh
Name-tag holder for wedding (low-poly)
Small holder to hold a name tag or a business card. I used it for my wedding with customized initials on the front. The letters can be adjusted in Fusion 360. Source file is included. I also added a version without the letters.
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 0
P
PrintablesYourigh
Wheel tire fix for Travelite suitcase
Old tire disintegrated, so here is a new TPU tire. Works well.
- Pobrania
- 34
- Polubienia
- 12
- Ocena
- 0
P
PrintablesYourigh
Shower Shelf Hook - Ikea Brogrund
Hook that snuggly fits to IKEA Brogrund shower shelf. Supports are made in Meshmixer. If it is loose - make an indent to the side diameter to fit it well. Printed with PLA - holds for 3 months now with no problem.
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesYourigh
Filament holder for Ikea Kalax
Print: Without supports when printed at shown printing orientation 0.25mm layer height or smaller PLA Use: Slide onto IKEA Kalax from the side. Hang (anything) on
- Pobrania
- 29
- Polubienia
- 9
- Ocena
- 0
P
PrintablesYourigh
MMS Pot Plant Support
Why? I have couple designs for plant supports, however plants often outgrow them. So here is a new, modular, and adjustable plant support. It is using MMS (modular mounting system or GoPro mount) to join the parts. Other parts and…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesYourigh
Glasses/Binoculars case
Case for whatever you want. Edit dimensions in Fusion 360 file. Originally designed as a case for small theater binoculars. With adjusted dimensions, can be used for glasses too. 2 versions are available: Binoculars-case - original design…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesYourigh
Loctite superglue holder
I kept knocking over the glue box, so here is a stand for it. Printed in vase mode 0.6mm bottom and 0.6mm extrusion width.
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesYourigh
Hourglass desk toy
Fusion 360 design of hourglass. It has 2mm wall. “Sand” fill I used ca. 0.8mm steel balls that I use when I want to make my prints heavier. For more ordinary “infill” sand is possible but it needs to be very dry and never get damp. I'd…
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesYourigh
Bearing clearance test / massage tool
I wanted to test a different way how to put bearing in the design so I created this spinner and accidental massage tool. Bearing used: https://vi.aliexpress.com/item/32717527870.html Can be adjusted for other ones easily - Fusion 360 file…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesYourigh
ultrafast XY skew checker (Prusa Mini)
My prusa Mini was skewed and it was not straightforward to fix it, so I made a little helper “model” to verify the skew in 30s. This entry is not for fixing the XY skew (yet). If you are interested, leave a comment and I will add some…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 5
P
PrintablesYourigh
MakerBadge stand
Fusion 360 source file is uploaded, now improved with parameters to change the space for battery (thickness and compartment size). The stand works on all versions of MakerBadge. The PCB is held by snaps in 4mm holes. To remove it, there…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 5
P
PrintablesYourigh
Projector leg riser (parametric)
I wanted to have the projector on a conference table in my living room, but the image was too low, so I designed an extender for front leg. Slide-on and lock leg extender for projector.
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYourigh
Cabinet joiner - parametric
Join two pieces of furniture easily. Add 2 screws and push this part over it
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
PrintablesYourigh
Washer child cover for ON/OFF touch key
For WW6000T and DV6000T series washing machines and dryers. The washing machine can be turned off during the cycle even when child lock is on. This prevents the little fingers to turn the washing machine off, while keeping the space from…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesYourigh
Tissue box holder on tape (F360 parametric)
Tissue Box holder attached with double sided tape I was tired of holding the box when pulling tissues, so I made a simple attachment that holds it steady on or under the shelf. I recommend using command strips, as they can be easily…
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 5
P
PrintablesYourigh
Laundry basket hook (curver)
Simple hook. I use it to hang bag for socks or some damp handtowel. Print PLA
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesYourigh
Display cover + scraper hybrid (MINI, MK3, MK4)
Scraper that double down as a display cover for Prusa Mini, MK3 and MK4. Design: Design in Fusion360 is parametric, so other display sizes can be easily crated. The hex pattern extrude have to be adjusted manually. I tried the new feature…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 5
P
PrintablesYourigh
Cestovný nočník / Travel potty
[ENGLISH BELOW] Nočník na bezplienkovú komunikačnú metódu pre kojencov. Rozdiel oproti bežnému nočníku je, že má sáčik, kde dieťa vykoná potrebu, a dá sa ľahko vyhodiť do koša. Je to výhodné hlavne pri cestovaní, kde nie je kde nočník…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesYourigh
Thread insert standoff - fix to wood / sloupek do dreva
Standoff to be tightly inserted into 5mm hole (into wood). Top presents a hole for M3 thread insert. Fits tightly to 5mm hole - need to be pressed with a tool (something flat) Printed with extrusion width 0.5mm, so the top walls are just…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesYourigh
Ikea Dragan soap dish shower door hook
Works with Ikea Dragan: https://www.ikea.com/cz/en/p/dragan-soap-dish-70271489/
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYourigh
Sunshade umbrella stand adapter ring (parametric)
Ring with cutout that you can fit into the stand, so the umbrella with thinner pole can be attached nicely vertically. Adjust the dimensions in Fusion360 if needed. Print: I recommend PETG, because it can bend better and clamp the pole…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesYourigh
Spring mirror holder - shower pole mount / úchyt zrcadla do sprchy s gumou / Ikea LÖNSÅS
Demo: Attach mirror to your shower pole whenever you need it. Rod diameter 23mm (20-24 would work). Dimensions: 125,5mm x 40mm Instructions: Slider and clip fits together, you can use glue if it is loose, or a little bit of heat if it is…
- Pobrania
- 15
- Polubienia
- 6
- Ocena
- 0
P
PrintablesYourigh
MakerBadge Stand extension
Stand for makerbadge, edit in fusion. I exported 2 versions, for 9mm thick badge and for 8.6mm. Edit in Fusion if you need a different ones.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYourigh
M8 bolt hook stackable rotatable
Prints without supports.
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesYourigh
Black diamond firstlight tent tear protector
The spokes at the end are rather sharp and could damage the fabric. This sovles it.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesYourigh
TritiLED holder
I designed a holder for TritiLED (LED light that lasts 1-10 years on coin cell battery). This LED can illuminate fully dark room when eyes are used to dark. Electronics was designed by tedyapro and source is on github. The light can be…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesYourigh
Simple case for LAUNCHXL-CC26X2R1
Kit must be equipped with original plastic feet, that slide into the 3D printed shell. Printed vertically.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.