Liczymy pasujące modele…
I ended up with this design because I tried a number of the ones available that left me underwhelmed. This wheel is 5.5" dia. I already have a nautilus style, wanted to try a round one for Field Target. If you make small scale adjustments…
I have had great success making these of PLA with 3 perimeter walls and 20% fill. Print picc rail down with supports and you should be fine. You can also order them printed and with all the hardware installed at the targetforge.net…
A wider version of my previous remix. Looking for a bit more stability for the wider WAGO 221-61x units. All credit to the creator! These work great on the 10GA 30A WAGO units. I did mine in PLA with 3 perimeter walls and 20% fill (which…
Needed a quick and dirty mount for a large toggle switch. Plan to stick it down with some VHB. 12mm shaft toggle switches should work fine.
Super simple, it a hot and lazy day in Central California. I pilaged myself… This variation should be easier to print, bed adhesion much less of an issue. Less waste, faster print. Enjoy!
These allow a sliding Tee or "H" joint for EMT construction. I used them on my portable solar panel project for the legs and they work great. You might want to up the perimeter walls a bit for added stiffness, I used 4 with 25% fill in…
I was really happy someone created a solution for the larger 221-61x version of the Wago. I did a remix that allows it to be surface mounted. Hats off to the originator, his geometry is right on. I just chopped off the DIN clips and added…
Just a REALLY simple remix. I didn't even touch the source CAD, everything was done with simple scaling in the slicer. Pretty happy with them and they are in use! I did a set in PLA 3 walls 20% fill but there is not really any fill.
This is pretty simple to print. Large end down and print two instances. No supports needed and I used 20% fill with 3 perimeter walls. The shaft that makes up the pivot hinge is ¼" steel round stock. I used regular Gorilla glue on one…
Lately I've learned I really like Sardines! Who knew? Well, I thought the cans where actually pretty solid storage vessels, so I made a lid for some of them. This one is for cans or tins that measure 2.4"X4.25" or 107mmX61.5mm. Pro tip #1…
This mount makes fixing these to a breadboard or enclosure easy. I use VHB tape. 30A Range Current Sensor ACS712 Module AC/DC for Arduino https://amzn.to/3UUdwXb 20A Range Current Sensor ACS712 Module AC/DC for Arduino…
If your looking for a simple but very functional toggle for a paracord project, this one might do! I print this vertical with a brim and supports from the bed. I find it helps with bed adhesion. 15-20% fill is fine, dialing the walls up a…
These parts assemble with a minimum of hardware. You'll need three (longish) zip ties, one 3mm X 20mm screw with nut, and 1 2.5" ¼-20 hex head bolt and thin nut. Remove the cover from the compressor and drill a single ¼" clearance hole…
I'm sure the model I downloaded originally somehow got scaled incorrectly. Most tapes I've seen are ~½" wide. The original unit was massive and did not fit my tape (Think BB in a Boxcar). I scaled it down 30% and used negative space…
Lately I've learned I really like Sardines! Who know? Well, I thought the cans where actually pretty solid storage vessels, so I made a lid for some of them. This one is for cans or tins that measure 3"X4.25" or 107mmX78mm. Pro tip #1 -…
Love the original, but I like some curves too! Kudos to the original! Printing mine in PLA 20% fill no supports on the base. I print the spool horizontal with supports as the originator did.
I wanted a REALLY good lighting system for my bike and this collection of parts is quite unique. The Harbor Freight quad flood light is really bright, has the perfect pattern for use as a bike headlight, AND its really cheap! $21 at time…
A mount for a 50A Ideal Diode that will allow current to flow in one direction. Handy for solar and battery projects. Modules where found on Ebay and AliExpress.
Found this cable clip and really liked it, it also makes a great HOSE clamp. I imported the original and grafted a 61mm clamp with an M3 X 10 screw and a nut. I also added a feature to make it easier to actuate the clip on the clamp. I…
I wanted way to keep my data acquisition shield safe when I stuff it in my backpack to code on the road. This one is tall because I needed to clear some connectors used for the data lines to the Arduino Mega I've been using lately. It…
Great way to quickly mount a 5VDC linear regulator in your project! Check out the links! 5V Out, 6V to 12V in AMS1117-5.0 5.0V Step-Down Linear Voltage Regulator Module https://amzn.to/3mPSkoH
Pretty straight forward. Just a magnet holder shaped like a thumb tack. If you get strong, 6mm diameter X 3mm tall magnets, and use two of them stacked vertically, they will work great! If they do not press in tightly, a drop of glue will…
I wanted a simple clip for the end of my fill whip. I used PLA, but I think PETG might actually be a better choice for this design. You really want this part to flex and go back to its original shape. Simple part, fast print, enjoy!
I'm working on a breadboard and using these to scale some input voltages to match the inputs on my Arduino was fast and easy. The electronics are simply a pair of resistors as a divider. I'm using VHB tape to secure the block on the…
This housing makes it easy to assemble a 6 channel analog source for your favorite micro. There are NO protections on this and you CANNOT drive anything with it. It is meant for providing variable voltage to a HIGH IMPEDANCE AtoD input,…
This bracket clamps to the upper bar of your BOB cart that you have presumably converted to ROB, or Rifle On Board. This design uses a tool clamp from amazon that is simple and non marring. It holds my Primus Shooting Sticks very well. I…
I have done these with 3 and 4 layer walls and 20% fill in PLA. A user that used my ¾" conduit brackets requested a bracket that would take a combination of ½" and ¾" conduit. The ½" on these is the sliding leg, the ¾" is the butt joint.…
I have been using a half liter bottle to do some testing and they are SO top heavy, it was driving me nuts. This design has a boss in the collar that is sized at .201" (#7 drill bit) which is the standard hole for a 1/4"-20 tapped hole.…
These little guys are pretty nice, but BOY are they tiny and hard to mount. This mount allows them to be mounted in your project, but also allows them to be slid out for replacement, or soldering. The first version I did was full length,…
Hall effect current measurement module mount allows easy mounting on you project. These also allow a user adjustable setpoint that will toggle a digital I/O line in addition to the analog output for live monitoring of the current. These…
These Ideal Diodes work just like a diode, but have practically no voltage drop. Prefect for battery protection and solar panel projects. You can get them here: 50A Solar Panel Battery Charging Anti Reverse Irrigation Protection Ideal…
These are a thin protective end panel to shield the bus on a 21700 2 cell parallel pack I built for a Meshtastic radio. Could absolutely be used in other ways. Here is the video of the pack build!
Is it still a remix if its your own design to start with? Hmmm. I did some different negative space in this one, the initial goal was to reduce print time and material, but know I kinda like this one better. Very steady and fits great.…
The text was printed with a color change from clear to black when the background outlined the letters. Then it went back to clear. Will be playing with this more going forward.
These are identical so you'll want to print 2. I used PLA, only because that was already in the printer. 3M VHB tape on the mounting surface and 4 M3 thermal nut inserts and you are ready to go!
These little guys act like a diode, but without the large voltage drop. This mount will give you a way to mount them in your project easily. 15A Solar Ideal Diode Controller Module https://amzn.to/43TSxaO
I wanted a simple clip for the end of my fill whip. I have a different design posted that simply snaps in place, this one is obviously more permanent and uses a single screw and nut (M3).
I needed to label an output on my solar project so others would know where to connect a device that need more current that most, like an inverter. There is no fill on this print at .2mm and you can select the layer and change colors to…
Hats off to the guy that made these holders, my model is a simple nut plate for securing the mount to a thin surface. The nuts are M4 actual screw length will vary based on your material. Adapter for DeWALT or Hercules 20V max…
To wszystkie aktualnie dostępne wyniki.
