Liczymy pasujące modele…
This is an electical box that i designed for my security cameras. It does not meet code but it might be useful for small projects. You can change the size by editing the base sketch in the object “box” and the depth of the box can be…
Converted to stl from here: https://www.turbosquid.com/FullPreview/Index.cfm/ID/379862 Category: Props
Seized carpet beater bar on your one+ ryobi stick vacuum? This is the part you need. Grab a 5mm inner bore, 16mm outer diameter bearing that is 5mm thick. Use some implement of destruction to separate the green thing from the gray thing,…
Print it in the orientation it was downloaded in. No supports. Solder your wires together and isolate them by taping each down with kapton tape. Fill with epoxy or hot glue or something when done. This is for 3mm aux cords and 4mm aux…
Just a stencil for my G.E.C.K. Should get an update once it's done printing but if not, here it it, it probably worked. There are 2 stencils. One is in 2 pieces for printing on smaller printers. Either print left.stl and right.stl or…
Abandonware. It might get some info later but for now here we are There are 2 versions, a flush mounted version and a version that is about 15mm deeper(setback). Either way, print one of each SideL,SideR,LatchRail,SmoothRail,Backplane.…
Print this guy with the ignition side down. Supports on build plate only. PETG PLA will melt in your car don't even think about it. Freecad sources included. If you put this on ebay I will personally come to your house and key your CX9
Don't make this please. each handle can now hold 3x ¼" hex nuts for weight
This exactly what you need to replace the liquid D20 contraption in a magic 8 ball with electronics. The LCD is a round 240x240 1.28in GC9A01 display from amazon.…
This is a case I designed for a nixie clock kit which I purchased on Ebay. There are a couple of modifications to the kit required. First, the display must be connected to the main pcb with wires instead of headers. Second, the real time…
Same as the other models, M3 machine screws for mounting, #6 x ½" (3mm x 10mm) wood screws for assembly. Raspberry Pi of course uses M2.5 screws for mounting so you'll need 4 of those as well. They thread right into the standoffs. You can…
Includes a "screw" mount for keyhole-style hangers and also an arcade PCB mount that takes an M3 threaded insert. Just print, insert the nutsert and add a command strip to the back.
This keeps the dust out of your server. Full guide for PCBs and firmware is here: https://forums.servethehome.com/index.php?threads/10-and-40-gb-networking-on-the-cheap-5-10.30394/#post-281355 The card that this was designed for is…
A couple of things about the part I remixed this from: Threads should be printed coming out of the bed. Most of the pieces on the parent thing require scaling and rotating in order to print properly. I have republished the necessary parts…
I have not been able to successfully print this. I'm hoping that it's possible to print with resin. Leaks like a sieve with FDM. The horizontal layer lines make it unusable. Just posting this in case someone can figure out how to make it…
Origionally designed for the deej volume mixer project on github. https://github.com/omriharel/deej?tab=readme-ov-file#build-your-own This box is in the style of the Schiit Vali 2. The freecad sources are included as well as stls to…
This is a set of rail brackets I designed for my rosewill case. I've tried it with the deep 4u case and the shallow one. It should work with any rackmount equipment provided it's at least 2u and there is 3/4in of clearance on either side…
I made this to get a topfin airstone to fit properly into my etchant tank. Don't use this for real fish unless you know that your filament/resin is safe for them. Fitting is a 5mmOD so scale appropriately. This probably shouldn't be used…
print and screw on, the inkbird slides right in!
This is an implementation of a eurorack enclosure using things from the hardware store. It's the base for my raspberry pi eurorack system. I've made no provisions for power though there are options in the group I'm going to create and…
I didn't end up needing this for my build. Free CAD file included for easy modification. Measured from original blanking plate but never tested. Print Settings Supports: Yes Category: Hobby
This is part of my collection of parts for the 3u eurorack server rack. This allows a cooling fan to be mounted that intakes air from the front of the rack and ducts it horizontally into an 80mm fan for cooling modules. I have done no…
Same as the other models, M3 machine screws for mounting, #6 x ½" (3mm x 10mm) wood screws for assembly. You can install a molex female in the back for power. Sources on github. See the rest of the collection here:…
This is a numpad I threw together from spare parts. There is no PCB so the matrix has to be wired up by hand. It uses a 7mm rotary encoder(most common kind) and cherry mx compatible keyswitches. I'll leave the microcontroller and matrix…
No schematics. Grab a couple of wood screws, an 20 pin extension and go to town. Wire the toggle switch between PS_ON(green) and GND(Black) Wire the LEDs (with appropriate resistors) to 5VSB(purple,330ohm), PWR_OK(white,330ohm),…
This clip can fix some problems in the commodore sx-64's keyboard membrane where it connects to the PCB. I recommend using conductive paint or copper tape before applying this clip. It screws in between the stock clip and the membrane,…
This is for mounting a power supply in your eurorack server rack. Not much to say. Source files are on github. See the rest of the collection here: https://www.printables.com/@Beefdip_176978/collections/1432728 Github Page for the project…
This hotswap bay is going to require a few fasteners, all m3 of various sizes. The hardes thing to find is going to be the sata passthrough which bolts down to the back of the tray. These things are fairly standard and the bolt patterns…
This adapter allows the use of central vacuum accessories with the ryobi evercharge vacuum. Any accessory with an internal diameter of 7/8in to 1.25in should fit. Source files are included for easy editing, and the barbed end should be…
This rack was designed to clear off my desk. Full freecad sources are included. This rack can be mounted to the underside of your desk with 4x #6 screws of your preferred length. Otherwise no additional hardware is needed. Parts should be…
There's a lotta parts to print here so let's start with the fact that if you're in a metric country, you'll want to adjust fastener sizes in the PARAMS spreadsheet in the freecad file. You're gonna need a bunch of 1/4in hardware: Nuts - 4…
This was modelled at 2am during a manic episode based on an idea from someone on twitter half a world away You need 107 LEDs, either 3mm or 5mm no further documentation will be provided at this time
Same as the other models, M3 machine screws for mounting, #6 x ½" (3mm x 10mm) wood screws for assembly. Sources on github. The only reason this passthrough has vents is that it was convenient to zip tie the cables there. It's kind of a…
There are no assembly instructions yet. Here is what you need: Yellow Boi(hard to find now) Food saver or other vacuum pump that takes 6mm OD tubing {{3d Printed parts}} 6MM ID O-ring (1.5mm) (this is a #5 in freedom units) 9MM ID O-ring…
I'm not sure what model this block is since I couldn't find it anywhere on the website. The block(with the stock bracket removed) is somewhere around 50x50mm. Should fit snugly. Print with relatively high infill and 4 shells minimum. Take…
Warning: do not eat. there are lots of files in here because I started with this 3d scan of a snickers bar:https://www.thingiverse.com/thing:5175835 there were a few steps in smoothing/scaling it to fit in a 3 musketeers wrapper, i've…
You'll want some tiny screws and washers to mount the board and power jack. The power jack is a standard type. Freecad sources included!
In case you need to panel mount a raspberry pi for whatever reason. This case reserves 2 of the USB ports for internal use. It should be easy to modify with the included freecad sources
Print in soft TPU at whatever layer height you want. Looks good at 0.1 or 0.2 or whatever. Print it solid with 4 walls. I stuck it on with smartphone 2 sided tape but you do you.
This is just a dump of some custom parts I designed for the Getac V200. I figured I'd dump them here before I ebay the computer itself. The handle requires 2x 1/4 in by 1 in screws and matching nuts. The handle mount requires 2x 12in x…
This is a headphone hook with a slot for the Soundblaster E1 Headphone amplifier. Screw or 3M tape this to the bottom of your desk to get your headphones out of the way. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts:…
To wszystkie aktualnie dostępne wyniki.
