Liczymy pasujące modele…
This design is based on konseben's original design, that was working fine, but i wanted to fine tune it a bit. Print it with at least petg, as pla will melt there under load. here are the changes that i made: made it 0.18mm longer(35.62mm…
I made this simple oil barrel for my 1/35 Orlandoo rc Jeep, as a scale accessory. Created a "solid" one, and hollow one, with a lid. this has a real 6 ccm capacity! so you can drink shots from it! or you can fill it with some micro scale…
This is my attempt to make a stand for the ROG Ally. There are 4 versions: simple stand i designed around my usb-c port repeater (usb hub, dock, or what ever you prefer to call it) simple stand - plain version for better compatibility…
hi, this is a simple pallet design that i made, for my rc forklift(it's design will be uploaded soon). it is 50x55mm so it's small. designed to be easy to print. no support needed. i printed mine with 2 walls, 0.2mm layer, and 9999 bottom…
this is a remix of 5bites's battery tray. cut the model into 2 parts, for better print-ability, and added strength. use 2 pc of m3 10mm countersunk headed screw to combine the 2 parts. Category: R/C Vehicles
I have made a bunch of printable mods for the BX. Every part is rotated to the best printing orientation. Tiltable, rotatable screen mount No support needed. Remove the sacrificial layer with a lexan body reamer/drill, or a step drill.…
A small cone for the small RC cars :) I made this design to be easily printable on an fdm machine, no support needed. there is a 0.2mm tolerance between the shaft and the "rings". I made this because i was unable to find a good two color…
This is to decide to go slow or fast :D Btw, print it with the possible smallest layer resoultion(like 0.1mm) and with the bunny facing down. Infill 30/100% depending on yor choice. You can use this as a shopping cart token in a lot…
this is a small trailer for the Orlandoo Hunter. I designed it to implement some leftover parts from my Orlandoo Jeep kit. What you'll need: 5 pc of OHSW01505 screw(4 for the axle carrier and one for mouting the towbar to the truck's rear…
This is a body cap. I decided to make them instead of losing the body pins all the time. Works the same way as the Proline ones, but i made one with a 8mm washer under the cap, and one with 15mm washer. Both of them are the same size…
This is a classic W95 logo. its very small by default, but you can resize it as you like. Hint: at smaller sizes there is a 100% infill recommended, and also use the smallest possible extruder head(like 0.1mm). Category: Keychains
This is a simply reinforced version of the original IBM keychain logo. Just added a backplate, and moved the hole to the end. Printed with 0.25 layer, 100% infill. Category: Keychains
This is a lightbar for the Traxxas Summit. it is a direct bolt on to replace the stock 2 led lightbar on the front bumper. Designed it to be able to fit 6 pc of led to the bumper, so you can have a nice light bridge. With a regular…
so this is a simple design i made because i sometimes found it difficult to line up the magnetic field on my ender 3 pro. even the smallest misalignment resulted a bumpy contact, with an air gap between the heated platform and the…
i made a few small upgrades for my TT Sapphire printer. There is an endstop mount for the X endstop switch. you might need some shorter than stock m2 screws to mount the endstop to the part. There is a modified stepper motor mount for the…
This is an extended receiver box designed for the Traxxas Summit/E-revo. Tested and fit perfectly with a 42mm bl motor and 14 tooth pinion. May not fit with 775 titan motor, i cannot test it. If it doesn't, then the mounting holes have to…
WARNING! Only for real IBM enthusiasts! :D Based on the simple IBM keychain logo, added backplate for strenght, and a nice heart. The chainhole is reinforced. Print as you like, but i recommend 100% infill for pocket surviving strenght.…
Made this LED mount for a 100x20mm COB LED. you can attatch it to the roof from outside, but it will be high. so i simply made a long cut to the top of the windshield, and attatched from inside. You'll need 4-6 pc of M3 screws for…
Made this propguard for a request. It is similar to the 56mm propguard, but it's a bit more beefy at some points, thus it might be heavier. I haven't tested it, since i use the 56mm version of the frame. feel free to contact me if…
Hi, i made this simple propguard for the super ultra tiny 56mm wheelbase frame designed by T4bee. its simple, yet i found it very effective indoors. the complete propguard is about 3.5-4 grams, depending on your print settings. I mounted…
To wszystkie aktualnie dostępne wyniki.
