Liczymy pasujące modele…
A wall mount for the Nighthawk M6 Pro. Has a cutout so you can plug in power, Ethernet and antenna connections. Print with the back facing towards the build plate and with supports. For supports that are painless to remove, use these…
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Hyundai Ioniq 5. Fits underneath the storage area in the console. My car has the sliding console, I am unsure if this will also fit on the fixed console. I…
Just a simple wall mount D-ring for cable management. The provided STL inner opening is 30mm x 30mm. I have included the Fusion 360 file if you want to change this to a different size. Just update the length and width parameters. Print in…
Do not use PLA or the heat from inside your car will distort the shape quickly. Use PETG or something with a higher glass transition temperature. No supports are required, just print standing upright. Originally posted at:…
A TS100 soldering station for use with Ryobi ONE+ 18V battery packs. Required parts: Rocker on/off switch (I used part number KCD1-101) Qty 2 Keystone 209 battery contacts 5.5x2.5mm DC male power plug to connect to TS100 Two core cable to…
I did not make this, it was created by TomB19 on Thingiverse: https://www.thingiverse.com/thing:5389850 This was removed from Thingiverse but it's too useful to not have out in the public so I am reuploading here.
A wall mount for the Home Assistant Connect ZWA-2 Z-Wave Bridge. Printed in PLA with 0.15mm balanced profile and gyroid infill.
Holds two of the cheap liquid dispensers available on Aliexpress (search for "alcohol press dispenser"). Great for holding isopropyl alcohol, acetone, flux remover, etc.
A wall mount for the FS.com simplex SC/APC and SC/UPC fiber optic couplers. It is compatible with the flanged and flange-less variants. Print with screw head holes towards the bed. Optionally use supports depending on if you care how…
A simple dust cover to protect the J1772 end of a J1772/NACS adapter. You should print this with a heat resistant filament like PETG as the summer heat will deform this. Printed with Overture PETG.
A simple wall mount that accepts a single screw to mount the remote to the wall. Print with a 0.15mm layer height. Wide part sitting on the build plate and enable supports. Support settings that easily remove: Top contact Z distance:…
A Gridfinity holder for a 50 CC / ml / 37mm bottle. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws depending on your preference. Used…
Simple brackets to mount the PrimeCables LTS-12S power strip to a wall using screws. No supports required.
A Gridfinity holder for a Bob Smith Industries Insta-Set 2oz (or any 35mm) bottle. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws…
A holder for an AC-27 / FE-J35 air duster to be used on 5.5mm hole / 25.4mm hole spaced peg board. Print the main body and three of the pegs. Glue the pegs to the main body (CA/superglue works fine). I printed mine in black PETG using the…
The Massca M1 has an included bit depth adjustment tool which is easy to lose. This part is designed to slot into the base of the tool and hold the adjustment tool as well as the included allen wrench. Support required on build plate…
A simple wallmount for the Foscam R2. Originally posted at https://www.thingiverse.com/thing:3900489
A replacement plastic lock piece for the Truth 16 series window lock. Install instructions: Drill out the metal rivets holding the metal back piece and remove. Flex the thin metal rod to release the winding arm. Install new part and…
A remix of Bigby's Greaseweazle station for the v4.1 model. Changes from original model: - Fits a Greaseweazle v4.1. Has a cutout in the back panel for the USB-C connector. - Mounting posts for a LM2596 DC-DC power supply for the 5V rail…
A Gridfinity holder for a 25ml bottle of Deoxit D100L. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws depending on your preference.…
I bought a cheap $5 dial indicator from AliExpress to use for measuring how level my Carvera Air bed is. The hole spacing on the indicator is 32mm and the backplate is 51.5mm. If this matches yours, you should be able to use this. Prints…
A bracket to mount the parallel and game ports to the IBM PC 5150 without wasting a valuable slot. Uses two of the existing power supply bolts to hold it to the back of the chassis. The ribbon cables enter the case through a gap in the…
A removable holder for mesh screen to be installed on an Imperial 6" R2 vent. Specifically model number VT0503-A. https://www.imperialgroup.ca/product/venting-flexible-duct/general-venting/hoods/r2-heavy-duty-wall-exhaust-intake-hood…
A blanking plate for the round hole located on the back of the IBM 5150 PC. I put a hole in mine to mount a 3.5mm jack connected to my PicoMEM for AdLib support but the model comes with no hole. Printed with PLA using a 0.4 nozzle and…
To wszystkie aktualnie dostępne wyniki.
