Liczymy pasujące modele…
Ready to expand your Warcry games to the Catacombs game mode that pits your Warbands against one another in a cramped & deadly dungeon? Use this terrain set to get you there! All the parts have been designed to be compatible with a…
Bluey Bookmark made by combing the front part of a Bluey Coin with the Bookmark body of a bookmark. https://www.thingiverse.com/thing:4222483 https://www.thingiverse.com/thing:1082544 Category: Other
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls, looks "good", isn't too chunky, & prints FDM as one piece w/ no supports. So I made my own. These walkways (or bridges) are…
This is a remix of https://www.thingiverse.com/thing:6408339 It consists of 3 parts (plus a cap) and will allow you to create a magnetic connection for a 4" dryer vent hose/duct to your Saturn 3 Ultra. Required parts for just this print:…
This download includes additional Rolling Pin Thickness Rings/Discs. These Rings are designed for use with Rolling Pins that are 44.2mm (1.74") in diameter. The rings have holes that are 20mm (0.79") in diameter. This download includes…
This is a simple Aligner Sleeve to help you setup your Jumbling Tower (Jenga knock-off) game, since the boxed game didn't come with one. This sleeve is designed for 48 blocks, that are each 2.85" x .95" x .55" (72mm x 24mm x 14mm), making…
This is a vent glove dryer designed to fit a 13 3/8" x 5 1/2" floor vent. .BLEND file included so you can resize for your vents. It was remixed from wenyibing's Air vent Glove Dryer https://www.thingiverse.com/thing:5196665 Print two of…
I took FluffyB's Warcry FluffTracker, turned it into a Lid, and built a Storage Box underneath it. When printing I like to turn on Ironing For All Top Surfaces. When printing the lid you need to Enable Supports. I recommend Normal…
My kids broke the shaft that came with their JOYIN Marble Run elevator. I found kennyxxl82's excellent 1:1 model ( https://www.thingiverse.com/thing:6954986 ) and printed a replacement. It worked well at first but the basic PLA I used as…
This is a flat (2D) Necromunda 2017 Skull remixed from Eberleg's Necromunda Logo ( https://www.thingiverse.com/thing:2595835 ). Suitable for using to emboss/deboss flat surfaces. Category: Games
A modified version of the "Disorganized Tyrant of Disease" by Emang. This guy has had his diseased iconography removed and has been reposed to look more like a "guard at ease". This is a Undivided Chaos Guard/Hero/Lord standing "at ease"…
The Whistle Buddy lets you turn a leftover "pizza box style" filament box into a whistle/zine distribution center suitable for providing to local businesses and community centers. Just don't forget to tape over the little window that many…
This Filter Funnel system (adapted from jsmith14's Filter Funnel https://www.thingiverse.com/thing:4771890 ) contains 3 files. A Filter Funnel that can sit reliably on the top of a 2L (soda-type) bottle A holder, for the filter, that can…
Here's a couple Psychics for the Lawdogs Enforcers. These are remixed by combining Alloteu's Lawdog Enforcers with Handguns ( https://cults3d.com/en/3d-model/game/lawdog-enforcers-with-handguns-alloteu ) with Mangaratiba's Null Assassin (…
Alloteu ( https://cults3d.com/en/users/Alloteu/3d-models ) is the original designer of Lawdogs. Evilamericorp ( https://cults3d.com/en/users/evilamericorp/3d-models ) & Dimkaf ( https://cults3d.com/en/users/dimkaf/3d-models ) took his…
These are just the heads extracted from Alloteu's Lawdogs ( https://cults3d.com/en/3d-model/game/lawdog-enforcers-torsos ). I've tweaked the bottoms of them to include a ball, cylinder, and hole variant. Category: Games
This is Fire Ring has been remixed from MZ4250's Fireball Radius Ring ( https://www.printables.com/model/77512-fireball-radius-ring ). It has been scaled to a 6" radius (12" diameter) the "bottom" of the ring has been made wider and…
This is a remix of https://www.thingiverse.com/thing:5407687 This is a 2.45mm thick spacer designed to allow an Elegoo Saturn 2, Saturn 3, or Saturn 3 Ultra to be used with a Fulament Fula-Flex Resin Magnetic Flexible Build Plate. NOTE…
This is Cody5's Guardian model ( https://cults3d.com/en/3d-model/game/guardian ), slightly updated for better FDM printing. I filled in the area under the Guardian and a gap in the head. There is now a version with & without a base as…
This download includes two variants of a Wall Mounted 3x3 Paint Rack suitable for holding large artists acrylics and similar. Each paint slot is 66mm/2.6" in diameter and 100mm/3.94" deep, suitable for large 8oz paints, or multiple…
This is a remix of https://www.printables.com/model/348319-picture-frame-castle-4-pictures-5x5-or-1-picture-9 . I upscaled it to fit an 8"x10" photo and split it apart for printing on a 10" bed. The parts are intended to be glued together…
This is a housing that you can put around your Titanium Innovations M-8800 Battery Charger to then allow you to mount it to a wall. Note that it's a tight fit. Some light sanding may be required though I didn't have to. Category: Tools
Today I went to a Chinese New Year festival with the kids today. They made Lanterns. I had the idea on the way home to mount them, temporarily, out front of our house. This download is for a 1/4" flag pole mount, for square columns,…
To wszystkie aktualnie dostępne wyniki.
