Liczymy pasujące modele…
I got asked if I can make the logo so that it can be placed on a table or something. Made some changes and only tried printing the connection between the parts. For me it was a snug fit that should work to hold it together but you can…
My lids for my Mason Jars got a bit of rust which is why i made some myself. Works for the 86mm wide mouth versions. No supports needed. ----------------------EDIT-------------------- As per @WackoPrints_268317 's hint I changed the…
This is a simple filament sample. You can edit the 3MF to add the name of the filament and maybe the printing temps you used. Or you can just use a sharpy :) Printing time is around 10 minutes. PS: As you can see I still have to work on…
Just a simple Raiders Name Tag ;) Easy to print in 2 colors.
For it to be really strong I used some modifiers to change the infill and use at least 3 perimeters. If you are Printing it in PLA I suggest to add a cylinder of the height of your first layer at the end. Otherwise it will absolutely…
I wanted a wallmount for my mini helmets and everything I found was not really what I wanted. So I tried making one myself. It is one piece and not multiple ones you have to fiddle together which is what I wanted. I think it works quiet…
I wanted a dust filter for my filament but not something that is connected to the printer where you have to push the filament through everytime you change the filament. I saw this filament clip from roblepetty and created one on my own.…
This is a simple place/holder to put tape rolls on the honeycombwall. To attach it I used the mechanism from @Bodo that I got to know from this model: Honeycomb Wall Compliant Mechanism Clip Mount…
To put it together you need two M5 screws that are about 2cm long and two fitting hex nuts. They fit really tight so just screw in the screw and go on turning until the hex nut is getting pulled into the right space ;) I change the clips…
The thread is really a tight fit but still better than a hole that is to small for 1/4" threads. I would say use 3 perimeters and everything else should be just fine.
Wanted something for my Zippos so I made something. Holds 5 Zippos and the fit is really snug. You have to push them in and they will not fall out even if you flip it upside down :D Fuzzy skin with the matt filament looks good but is not…
@amatsu Used it for the AG06 and it looks like it works just fine. So I added that to the description as well. ---UPDATE--- I needed a stand for the Yamaha AG03 MK2. This is what I came up with. You can just screw the stand onto the…
@DarkZed1_7301 Asked for a version with two spaces for a screwdriver so I edited the files :) I do NOT own a second LTT Screwdriver or the new mini version of it so I cannot try the spacing myself. I hope it works. If not please tell me…
After using this for a lot of times I noticed the arm coming loose. After retightening it the servo would not completely get the arm in position which was cause by too much friction between the arm and the Servo Motor Housing. I changed…
I made some adjustments because the need for a 125mm sheet came up. I could not test it myself because I do not have a 125mm sheet. It should work but I will have to get an answer for that for now. I also made a version for Hex Lock Nuts.…
I wanted to test PA6 CF and thought it would be able to handle the heat of the kamado style grill. At least when you are starting to heat up the grill and after 1 hour I measured around 50°C at the metal part. I think you could use it all…
Quite a simple nozzle holder for Revo nozzles. I used some drop in nuts and M3 screws to fit it in place. Depending on how good you printer is dialed in you should be able to push the nozzles in place. Maybe you need to “screw” it in. But…
To use this you need to add some threaded inserts so that you can use some m3 screws to screw it in place. It uses the holes that are already in the case so no need to drill some ;) What you might have to to is hammer down the marked part…
It is an adapter for the Loop Mount Twist. I suggest to use the file and edit it for your diameter of your handelbar. It fits REALLY tight into the Loop Mount Twist! Used supports to print which should be cleaned up really well ;) I put…
To wszystkie aktualnie dostępne wyniki.
![NFL Raiders Logo [UPDATED]](https://media.printables.com/media/prints/152477/images/1433724_922d1b5e-3fab-4447-bd0a-94cd3eaf200a/3d-print-raiders-logo.jpg){kind=logo}
![Mason Jar Lid [UPDATED]](https://media.printables.com/media/prints/140783/images/1335049_b5605415-9046-4ba4-a287-98bc56e41496/mason-jar-lid-2.jpg)
![LTT Screwdriver Holder (Honycomb Storage Wall) [UPDATED]](https://media.printables.com/media/prints/459824/images/3777274_a1149fb0-6937-4546-883e-a0379e73e41f/pxl_20230422_193850325.jpg)
