Liczymy pasujące modele…
The small indention is where you should align your lower lip when you blow. Sizes are in US and diameters(mm). Pick your size and print. I've test printed in PLA, PETG and TPU. Smaller sizes may require a brim to properly print. Enjoy!…
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…
Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…
I designed this to replace the ashtray in my 2008 e92, but this should work for any BMW e9X model. This design will hold a Samsung Galaxy S21 with a case measuring 80mm wide. I printed in black ASA at .20mm with Supports. It is best to…
I designed this to replace the clip in my car that started to fall apart. This design is split into 3 components: Locking Sunglasses Holder Sun Visor Clip (3 optional sizes). I recommend not using PLA as it will likely warp in on a warm…
Pens and Pencils Contest Entry. Uses standard Bic pen ink cartridge.
I wanted to create a dual purpose bottle opener and thought why not make a holster to hold that beer after opening it. Slide belt through the outmost slots and insert 2 pennies or similar sized coins. Designed for belts less than 45mm…
I like the ease of printing of the Skadis T-Clip design but could not find a tape measure holder that was large enough so I designed my own. This will hold a tape measure 47mm deep. The T-Clips can be found below. Be aware that the…
Print with supports. I recommend using PrusaSlicer's Variable Layer Height feature to smooth the top of the head.
I could not find a hygrometer/thermometer mount that didn't use the top support of the Prusa i3 MK3S, so I created one for use on the side supports. This may be needed for anyone who doesn't have enough clearance within their Lack…
Multiple size ring inserts for Craftsman router table with 2 inch opening.
It is recommended to print without supports to avoid accidently blocking the drain holes designed for the center holder. Don't worry if it gets a little stringy from the bridging. Once printed, insert bearing in the top part first and…
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
This design is for anyone who needs some extra space after building the original lack enclosure. This does not require any additional hardware and you don't have to throw out any parts you have already printed. You will have to relocate…
This is designed to hold 2 remotes and glasses. I was able to print this upside down without supports using PLA. I have attached the Fusion360 Cad file for anyone who needs to customize it for their own needs.
Wanted to have a removable enclosure like the Original Lack Enclosure. This is combination of both models. Installation order will be slightly different. You will want to assemble the U-Frame first and attach table legs to the U-Frame.…
This case is specifically designed to fit the Depstech DS300 Endoscope Cable Holder designed by me. https://www.printables.com/model/674345-depstech-ds300-endoscope-cable-holder Using the design from Whity's Rugged Box model. You will…
You really only need 2 of them per can. To lock in place insert sideways and rotate 90 degrees.
Created a passthrough for the hinge on the front side.
Simple tool used to compress the plastic standoffs that hold Bally/Stern boards. I find it easier to use than needle nose pliers. Just press the tool over the standoff to disengage it from the board and gently pull the board off with the…
This is a simple refrigerator magnet designed to hold all those Holiday, Baby, and Wedding announcement 5"x7" photo cards. No supports needed. Print laying flat on face. I was able to press fit the 8x3mm round magnets without glue. I…
This holder is designed for Samsung SmartThings SmartTag. It is printed in 2 parts to allow easy removal of SmartTag when needing to change battery or take on the go. Supports will be needed for the center portion of the holder. Be sure…
For anyone who has broken one or both of their latches. I've created a left and right latch. It may look like they are the same, but my design shortens and chamfers one side of the pin so it can be pressed into the case easier without…
I designed this model to be used with my Original Prusa Enclosure, but can be used anywhere with a metal surface. Model uses 6x3 circular magnets. I recommend printing in PETG as .20mm layer height. The magnets are designed to be press…
Couldn't find a holder designed for the Ikea Skadis board so I created my own. Shoutout to @Gas2lag_531211. I'd liked his version for Honeycomb Storage Board, so I created something similar for Ikea Skadis board. Designed to hold 5, but…
My design for the tea bag organizer contest. Should hold an assortment of different style tea bags. There are 4 components that make this model. Petal Holder x18 Blossom x3 Stem x1 Base x1 Assembly is pretty straight forward and the…
I recently finished restoring a 1978 Bally pinball machine that has been sitting in the basement for the last 30+ years. I have replaced a lot of components with parts I have purchased, but having a 3D printer has allowed me to print my…
This is to add some additional support to the bed. Designed for v3.2 batch 2 with a glass bed. The clip is designed to fit around the connector. It works by applying upward force from the bed while also applying some down force against…
To wszystkie aktualnie dostępne wyniki.
