Liczymy pasujące modele…
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…
Wanted a nice VESA 75 to 100 adapter for use with a Raspberry Pi 4 case for an Android TV project I am working on, and I modded this one by removing the dovetail, and duplicating the cutouts to skeletonize it. v.1.1 Fixed M4 hex nut…
This is inspired by SSCraft's Runcam 5 GoPro Mount Frame on thingiverse: https://www.thingiverse.com/thing:3884268 Also, this model by SkyCamOne was used for visualization of the design: https://www.thingiverse.com/thing:3723863 This is…
I printed the various socket organizers, and my son has this set of Pittsburgh color-coded metric deep impact ½" drive sockets he asked me if I could print him a tray. I couldn't find one already made, and did find the actual sockets…
This is a remix of a 10" mini rack that uses Reliable Hardware Company 8U steel rail sections, pre-threaded 10/32. These are readily available on Amazon, as I couldn't find the original's Adam Hall rails. The original model parts are too…
This is a mount to put a Unifi Gateway Max router into a mini 10in network rack. Print with the face of the mount down on the build sheet, rotated 45 degrees. Print with supports (I chose organic supports). No hardware required, unit…
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
Our building underwent a 15 million USD 18+ month remodel, and they bought us these metal hooks that are more likely to tear clothing and I figured I could print one that would be better. Printed the Hayworth and Steelcase models, and…
Imported the original no-disc STL into Tinkercad, added some height, solid bottom, and screw holes. Print without supports, might use a brim if you have adhesion issues. Just over 8 hours to print at .2mm with 15% infill and 3 perimeters…
10in rack mount for the Unifi Gen2 Cloud Key, with RJ45 keystone jack on faceplate, with a retention post, and centering bars on the back of the mount face. Print face down with snug supports everywhere or organic on build plate. I would…
Print top down, organic supports for the hooks or snug supports. I used a 100% infill modifier box in prusa slicer for the hook area, and 20% gyroid infill the remainder of the shelf.
Print face down with PETG or PLA. Cutouts for the inserts are 4.3mm which is what my template calls for on my printer. Takes M3 heat-set inserts on the inside of the mount. Otherwise, all the other build instructions and variations on the…
Mod Wing on my holster shipping with 2 spacers, one 10mm and one 14mm and I felt that some more depth would be better, so I modeled a taller one that is 17mm. The gcode file is with supports and Prusament PETG 100% infill with .15 layer…
Thought it would look good with the Prusa Research Logo embedded in the lid. First test print I had some z-axis issues and aborted, recalibrated and tried a small section of the logo/lid part as a test, and had some issues with adhesion…
The actual model is round, I originally was going to use hexagon infill with no top or bottom layers, but triangles printed faster.
The new cube farm we moved into at work after the building was remodeled doesn't really support using push-pins to hang things on the walls. There are 2 versions, one that takes an M4 hex nut, and one sized for a RuthEx M4 threaded insert…
I really liked madmac10's Mr. BulletFeeder controller mount for the XL750 (assume it would work fine with the XL650), and printed it for my XL750. I also have a RL1100, and the casefeeder support pole is square-ish, 25.99mm x 25.62mm, so…
Puck cutout is 90mm x 10mm for a Verizon wireless charger.
I have a MP5K clone (MKE AP5-P) that has a foregrip from A3Tactical, and the flat mounting base is 25mm wide, and the Midwest Industries forearm is 17mm wide. This intrudes on the use of the adjacent rails at the 45 degree. I found the…
I had bought a generic 12 port 1U 19in CAT5e patch panel for my home network (from Monoprice.com), and never got around to using it, as I had previously put in a 6x wall plate for the keystone jacks in the closet with all my network gear,…
This is for an Interior Concepts cubicle system, where two wall panels meet. The brackets span 16mm gap, and assemble with M4 hex head bolts and nuts. 4x M4x30 and 4x nuts required. I used painted on supports for the hex nut cutouts in…
Mirror the base along the X-axis as needed depending on whether you need a left-hand or right-hand oriented hook. Print the hook on the side, with organic or snug supports (I used organic), and paint on enforcers. No supports are…
This is a 10" mini rack mount with optional retention features. You can use the keyholes on the bottom of the device with M3 button cap screws, or the retention clip with a M2x8 button cap screw and M2 square nut, or both. Possible future…
Should fit standard 9"x9" Broan/Nutone Bathroom vent as a replacement cover
Pretty simple print, I did it at .3mm with a .6 nozzle with a 3mm brim.
Cutout some of the case opening for the SD card access to make it easier to get to for the VESA75 mount. Sneaks orginal work is one of the best things I've printed, it goes together as it should, even when the bottom or top has adhesion…
Styled after the Prusa test logo after my wife said she didn't want a lever/switch clean/dirty magnet just a clean magnet only. What I should have done is modeled a binder clip magnet with a post-it note that said clean on it... Might do…
I wanted a grill over the fan, so I made this using the blank. Modeled in Tinkercad, which is not ideal, but I don't know how to use Fusion 360 very well yet.
This is the art from the last USPSA Major Match I ran in 2019. I had the Adobe Illustrator file, and exported the 3 color layers into .svg format, and imported into TinkerCad to do some layer masking to create stl files for doing a…
This is scaled down from the phone stand, and I created a base for 4 8x3mm magnets, countersunk for a M2x16 socket cap or button head screw to assemble it. I put a support/screw tower in the center of the clamp. You could do a layer color…
To wszystkie aktualnie dostępne wyniki.
