P
PrintablesLayerMaker
Cartographer V4 Xol/A4T Carriage Probe Module Mount
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
- Pobrania
- 402
- Polubienia
- 65
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesLayerMaker
Annex 2020 Enclosure Clip with door latches
Printed using ABS, PETG could work too. Designed for 3mm enclosure panels on 2020 extrusions. Print settings used: 3 walls at 0.42mm outer wall and 0.6mm inner wall Print 2x of the latch handle and latch base. Requires 2x M3x6mm screws to…
- Pobrania
- 98
- Polubienia
- 34
- Ocena
- 0
P
PrintablesLayerMaker
Voron Trident R2 AB motors pin mod and short shaft double shear (monolith + Crazy Ivan)
Intro: Thanks to the Voron team for providing the f360 timeline files which helped tremendously! This mod reduces the thickness of the plates to 5mm (same as R1) to enable the motors to be closer to the belt path to enable higher…
- Pobrania
- 49
- Polubienia
- 15
- Ocena
- 5
P
PrintablesLayerMaker
Pico MMU Module Base ECAS Mod
Print using same settings as prescribed for the Pico MMU. Step files provided for modification of tolerances if needed.
- Pobrania
- 45
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLayerMaker
TV06 and A4T/Xol Compatibility Mod
Print in ABS/ASA with standard Voron settings. Either print the single or two-piece Y carriage version and 2x of the belt clips. If you are using the single Y carriage version, it is recommended that you print at a 45 degree angle for…
- Pobrania
- 37
- Polubienia
- 13
- Ocena
- 5
P
PrintablesLayerMaker
TV06 Modified Feet - Voron Trident Compatible
This is my first remix where the feet for the TV06 has been modified to be compatible with Voron rubberised feet or the Voron Trident adapter for the Hula system (https://www.printables.com/model/898357-hula-for-voron-printers)…
- Pobrania
- 36
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLayerMaker
BME680 sensor 2020 extrusion mount
Please ensure that your printer is dimensionally accurate as the part is very small. 0.2mm layer height. PLA is acceptable if it is not mounted near any hot parts. If the enclosure temperature is >50C, I recommend printing in PETG/ABS/ASA…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLayerMaker
TV06 Silicone Nozzle Wipe Mount
Make sure you print using ABS or ASA(recommended) as the heatbed can get >100C when printing those materials. Do not print using PLA as it will deform even at “low” temperatures. Print with the largest surface on the heatbed.
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLayerMaker
Lowered SV06 screen mount for TV06
Print using PETG/ASA/ABS. No overhangs required. Use original screws from SV06 screen
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLayerMaker
TV06 Modified R2.1 Rear and Side Skirts
Rear skirts: Requires 4x M4x8 socket head screws and 4x M4 T nuts to mount to extrusions. Use auto supports for the cantilevered bit, avoid ABS/ASA as it may warp at that section. Side skirts: Requires 12x M3x8 socket head screws and 12x…
- Pobrania
- 12
- Polubienia
- 5
- Ocena
- 5
P
PrintablesLayerMaker
TriV06 - TV06 triple z mod
Triple Z mod inspired by the Voron Trident with a magnetic bed mount solution from . GutterGames_CA . Print in a stiff filled material such as ABS/ASA CF/GF. BOM: 18x M5x10mm BHCS 4x M4x8 BHCS 20x M3x12mm SHCS 2x M3x10mm BHCS 16x M3x8mm…
- Pobrania
- 11
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLayerMaker
TV06 5015 Bed Fan Duct and Mount
Important: this will interfere with the internal spool holder - you will need to remove it and mount your spools externally. Print in ASA or higher temp tolerance material. I've added some aluminium tape as added insulation due to…
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLayerMaker
Nevermore Mini adapter plate for 2020 extrusions
Print using ABS/ASA when used inside a heated chamber. Print 2x 3mm keys from…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.