Liczymy pasujące modele…
Rugged box case for 2x NP-W126s Fujifilm Batteries, nice and slim for taking it with you in your bag. You will need 3x M3x20mm Screws. Edit 2025/01/06: Updated the lid to have more clearance to close easier without interfering with the…
Just a quick and easy enclosure for housing a wyoming satellite consisting of a Raspberry Pi Zero 2W, Respeaker 2 Hat and this speaker (the 8Ohm 10 Watt Variant). Print everything without supports, depending on your printer you might need…
Just a very simple box that utilizes the packaging foam from the box the drone came in. You will need 6x M3x20mm Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance…
Simple carrying case for the GoFilm20, fits perfectly, no rattling. You will need 6x M3x20 screws. Print everything without supports, use TPU or similar flexible material for the seal (you can also just use it without the seal as well).…
I designed a simple mount for the popular "Matchstick" LED lights for the Voron 0. They mount to the inside of the top rails with 2 M3x6 screws (you can use BH or SH) using M3 nuts. The LED strips themselves should be mounted using 2 M3x6…
Simple box design for 4 18350 cells. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness. EDIT: added a lower part to…
Simple battery case created from the design by @TomSchoenlau I recommend printing these with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.
Everything is printable without supports. You will need 3x M3x30mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction to maybe 1.2mm or just use…
Quick and easy design of a single dosing funnel for most of the Eureka Mignon grinders (mine is a silenzio model). Print without support, both parts upside down. You can use ABS, PLA or PETG by your preference.
i recommend printing this out of petg, print as oriented when importing the files into your slicer, the main adpater needs support. You can print a retaining ring from another click and clean model, or buy one from the bosch spare parts…
Simple box design for your Convoy S21G, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. I recommend printing the box,…
For those of you who don't care much about taking a lens hood with you, like me, a much more compact version of my case design for the XF 23mm F/1.4 R lens. Everything is printable without supports, print the inserts out of TPU or similar…
Print in PETG or PLA but I recommend PETG since you are likely to get oil on it if you are going to use it for automotive work. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point…
This case will hold your S21e flashlight without the pocket clip to save space for the people that don't use one. There is enough space to store the flashlight with the tailcap ¼ turn loosened to protect the battery. You will need 6x…
With this case you can mount your Uruav V3 module together with an Eachine Pro58 VRX and a Runcam mini DVR for recording your flight footage. Print with PETG or PLA with 0.15 or lower layer height for best results. Supports are only…
You will need 3x M3x20mm screws. The TPU seal is optional. There is enough play to allow for storing the flashlight with the tailcap ¼ turn unscrewed. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours,…
Simple box design for your Emisar DA1K, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied…
Everything is printable without supports, print the inserts and Seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try…
This will protect your TS10 from getting scratched up in a drawer somewhere or in your bag with 10 of your other favorite flashlights. Fits the included pocket clip as well, but can also be used without one. There is enough space to fit…
This case will hold your S21e flashlight without the pocket clip to save space for the people that don't use one. There is enough space to store the flashlight with the tailcap ¼ turn loosened to protect the battery. You will need 3x…
Everything is printable without supports. Print the Seal and all the parts labeled “inserts” out of TPU, print the inserts with 0 top layers, 1 perimeter and 10% gyroid infill. Cut the two long inserts to length after printing, they are a…
Everything is printable without supports. Print all parts labeled TPU at the end out of TPU, print the Lid_insert with 0 top layers, 1 perimeter and 10% gyroid infill. You will need 6x M3x20mm screws for the hinge and latches. If you are…
Everything is printable without supports, print the inserts and Seal out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try…
Everything is printable without supports, print the inserts out of TPU or similar flexible material. You will need 6x M3x20mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling…
Everything is printable without supports, print the Seal out of TPU or similar flexible material. You will need 3x M3x30mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down…
You will need 3x M3x20mm screws. The TPU seal is optional. There is enough play to allow for storing the flashlight with the tailcap ¼ turn unscrewed. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours,…
Everything is printable without supports. Print the Seal out of TPU. You will need 3x M3x35mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction…
Simple box design for your Convoy S6 or S7, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. The tolerances are pretty…
Simple box design for your Emisar D3AA, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied…
Simple case that holds 4 14500 batteries. I recommend printing these with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.
Simple removable HEPA exhaust filter that easily mounts to the top hat by replacing one of the side or back acrylic pieces. You will need: 1x 24V 80mm fan 1x M3x6 Screw 4x of these filters: link or any other filters with 80x40mm…
Simple box design for your Convoy T6, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. I recommend printing the box,…
Simple box design for your Convoy M21K, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery/mechanically lock out the light. You will need 3x M3x35 Screws. I recommend printing the box, lid and…
Simple box design for your Emisar D4K, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x20 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied…
Simple box design for your Emisar D4SV2, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery. You will need 3x M3x25 Screws. I recommend printing the box, lid and latch with “Fuzzy Skin”…
To wszystkie aktualnie dostępne wyniki.
