Liczymy pasujące modele…
Split the part into objects flipped them to the top and the bottom are on the build plate. printed .2 mm layer Heights. I've only tried it with PETG but since PLA is so hard I think it will work to. Has been used and works well.
Printed each part at. 2 mm what is three perimeters. I added infill modifiers on the threaded ends of the hammerhead to the chamfer at 100% infill. Add a brim around the inner and outer of the handle. Everything else can be printed…
Print using supports at about 60° also a brim on the inner and outer. I printed mine out a PETG with 3 parameters and 25% infill. I added an infill modifier for the bottom to the bottom of the palm plate to make it solid. Mark off the…
I used PETG I don't know about PLA. Print at .2 layer height with 3 perimeters and if you want you can print the horn separately at .3 layer heights with three perimeter's It's up to you. I used a gallon size Ziploc as the diaphragm using…
All 3-D printed all you need is a razor blade. print at 0.2mm. I've only tried with PLA not sure about PETG. print the main body standing up with a brim. You can try making the pin solid if it breaks make it 2 or 3 perimeters so I can flex.
310 mm (12.2 in) Roger meat tenderizer I made mine on PETG shaft and handle our normal infill but the head 50% infill for weight. mine slid right together snuggly you might want to glue it if not but I didn't. The handle will probably…
Better sock mold for E3D V6 hot end using JB Weld RTV, red high temp red silicone gasket maker 288 degree C Constant working temperature 344 degrees C max. For higher temperature use the JB weld RTV copper its constant working temperature…
For wire metal shelves around 1 inch front face to hook onto
To wszystkie aktualnie dostępne wyniki.
