Liczymy pasujące modele…
This is a 5 gram skid for use on a DJI Mini4K or Mini 2 lightweight drone. The skids weigh 5 grams and print easily; I used ASA but PETG or PLA should work too. The skids keep the props from mowing the grass when taking off and landing.…
Remixed this for my wife for our next D&D campaign. [Update: first print, the flail seemed a bit flimsy to my wife, so it has been made heavier.]
Changed to a lighter, cooler, sleepware top for the hot nights of summer
Based on pose of Z. Tsereteli's ballerina statue. I printed the supported model and uploaded a make. Print went well, support removal was easy. It really is amazing what you can 3D print these days.
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small…
Three of Ziggy's "Best DeWalt Battery Mount" tied together into a single unit
Slide your Atom 2 drone into this sleeve to protect the propellors during transport. Less bulky than the velcro strap that comes with the drone. Also protects gimbal if you've lost the gimbal cover. I use this in the soft carry case that…
Note that this model, unlike the original, does need supports (at least for the horns) but it really deserves to be resin-printed anyway, Teirale's work is that good!
Made for resin printing.
This model is derived from my Frisky Tiefling Dancer model, but with substantial enough changes to deserve a separate entry. For models are provided, all of which have been print-tested (see the Makes). The FIVE models are either based or…
[UPDATE July 18: I have no idea why the Prnitables Adminsitrator labeled this NSFW: there's no exposed “naughty bits” in any of the models. But there also seems to be no method of contacting the Administrator to find out what the problem…
Figure based roughly on FFXIV Viera but with shortened torso and heavier. Arms from the classical statue “The Violinist.” Horns, ears, and trident created in OpenSCAD. Hair is from Rolls Royce hood ornament. Tried to include the net a…
Based on pose of Z. Tsereteli's ballerina statue amd an anatomical drawing of a fruit bat skeleton. I printed the supported model and have uploaded the make. Print went well. It really is amazing what you can 3D print these days. [Update:…
My D&D character in the campaign I'm in acquired her long longed-for wings, so of course I had to create another new figure. I gave her two new outfit more suitable for flight: light and streamlined – and enchanted against wardrobe…
Made for resin printing.
This model is a mix of classic Greek statuary (legs, hips, arms) and a Rolls-Royce hood ornament (torso, head, hair). Clothes, slippers, daggers, horns, ears, and tail are made from scratch in OpenSCAD and Meshmixer. The latest revision…
Based on pose of Z. Tsereteli's ballerina statue. I really like this. You can make many things from the base model: a spellcaster, a School of Dancer bard, and so on. Update: I've added a version with palms up and a split skirt. The…
This remix builds on JankieL's adapter to create a compact 90W 3-port USB powerback from a DeWalt battery. All the wires are kept internal. I've included JankieL's top part in the list of files, along with the modified bottom part and the…
I designed this model is for my character in my next 3.5e D&D campaign., a female half-elf Beguiler who works as a tavern dancer. The model address one problem I've had with minis: when supported just by their legs, the weak ankles that…
Can handle a fist-full of dice at once. Internal “Pachinko” mechanism ensures randomization of result, slows descent for suspense, makes a nice sound. Included is a 3MF for the tower and a 3MF for the tray it can be mounted and carried…
The Retiarius was a staple of gladiatorial combat. I haven't printed this yet, but with the Chitubox Basic supports in the supported model there were only 15 small islands that needed removal so I'm optimistic. I'll post a make once I've…
Printed using the same materials and settings as Prusa used in the original: PCCF, .20 layer height, 15% grip infill. I mounted it top-front-center of the enclosure, as shown in the pictures. With four magnets total, the grip is pretty…
I developed this model for the character I'm playing in an upcoming 3.5e D&D campaign. She's a slim half-elf Beguiler who works, among other things, as a tavern dancer as a way to gather information. The motivation for the multi-ribbon…
A new body and new gear, derived from Ancient Greece. She looks a little younger than some of the other Frisky Tiefling models, I think. Revised May 18 '25: Tweeked the angle the character was standing at. I'll get photos of a make up…
This is a stand for the popular LEVOIT Core Mini-P Air Purifier . It raises the top of the air purifier to about seat level, so it works well under a desk. The stand sockets into the bottom depressions of the Levoit Core Mini-P so it…
I use this to secure PC4-M10 Male Straight Pneumatic PTFE Tube Push in Quick Fitting Connectors to my filament dryers so I can print from them. Screws on very well. Works for 1.75mm filament running in standard 4mm OD PTFE tubes. Prints…
[UPDATE: FINAL VERSION, with instructions]] There's now a PDF with detailed instructions (including lots of pictures) that you can download. Please look into it and you'll see how easy this is to assemble. Note that the OpenSCAD file is…
Hanging Quick-Grip bar clamps off off a towel bar or clamping them to a shelf was inconvenient, and a poor use of space, so I designed these racks. In them, clamps are securely held 5-deep, and by having the clamps open be different…
The popular EKLIND 92600 PSD Ball-Hex (allen) Precision Screwdriver set comes in an annoying plastic bag. This is a much more convenient way to store and transport them. Perfect for both in-drawer and in-toolbag. Drivers won't slide out…
After 24 iterations I finally have the 95A TPU case I wanted for my iPhone, drivers license, 5 credit cards and one or two folded up bills. It is lighter and smaller than commercial wallet cases, comfortable in the hand, MagSafe charging…
This phone stand can be carried alongside the phone in your pocket. It even holds phones in wallet cases, and raises the phone high enough for a charging cable to fit underneath. Opening and closing is easy, and built-in snaps keep it…
My wife's cane may have had a rubber tip once, but it came off and we couldn't find it. So I designed and printed this tip in 95A TPU, and it works great. Slipped on easily enough but shows no signs of coming loose. OpenSCAD source is…
The dwarf cover door replacement for Original Prusa XL that reduces weight and allows you to adjust the idler screws without opening the dwarf cover door. Print with setting recommended by Prusa, e.g.: For 0.4 nozzle and from PETG, use…
I didn't like storing my Z-system lenses vertically, and putting them in individual cases or my ThinkTank photo carryon was inconvenient and took up too much space. SO I carefully measured my lenses and made fitted drawers/trays for them,…
These hangers were designed for SteelSeries Artic Nova Pro wireless headsets, but probably work for most other headphones/headsets. If resizing is needed, the 80-or-so line OpenSCAD file is included for you to modify. The rail version is…
On busy days, I would often lose track of whether I'd taken my daily prescriptions. This organizar/tracker prevents that. There are 4 versions, holding 2-5 standard-size prescription bottles (39mm diam, 71mm tall), and a rotating dial…
A common, effective, and cheap method of cleaning alcohol (IPA or denatured) used to rinse 3D resin prints is to leave it outside in a glass container for a while (here in Arizona, about a week) so the sun can polymerize all the resin…
This stand allows iPhone MagSafe charging for an iPhone on a walletcase, with the walletcase fully open do that the iPhone can operate like a desk clock in Standby mode while charging. The other side of the wallet case folds back and…
To wszystkie aktualnie dostępne wyniki.
![print-in-place Landing skids for DJI Mini 2, Mini 4K drone [UPDATED]](https://media.printables.com/media/prints/cd1d2ea4-b05a-4c9f-8e33-aff682509338/images/11605224_92836e97-9b8d-472c-b412-5a83f33ecc83_6bcc2588-1b8c-432d-9f8b-a7dc1c174f7e/merge_088_107.png)
![Female elf or half-elf with military flail [Update]](https://media.printables.com/media/prints/1f89ca8e-ab65-4355-8306-47ed92ee1cfa/images/11967393_619895e2-d013-4ed2-8460-f9feac21141b_b532c1ce-66ea-435e-9b00-dfa310e4ef89/chosenone_cover.png)
![[Updated July 12,2025] Frisky Winged Tiefling, crouched curvy female, flight harness](https://media.printables.com/media/prints/e37932ce-6f6e-4eea-a417-d1a81f6369ef/images/10202359_5ac55138-e592-4265-bb22-4b0ec78e2dd6_8de174ef-5a21-4083-b272-48076164f8c6/frisky-winged-crouch-r5-cover.png)
![Beguiling Female Half Elf Dancer [Updated]](https://media.printables.com/media/prints/9c3d649c-860a-4913-802e-adaaa27b2170/images/11368156_031fece0-0e77-4b4b-8613-ef7b281831a7_8f78224a-95f7-4f2c-b02c-2482f3c7929a/beguiling-half-elf-r2b-2025-12-08.png)
![TPU folding wallet case for iPhone16 and iPhone16 Pro, holds 6 credit cards, MagSafe, doesn't block camera when opened [OpenSCAD] [Updated]](https://media.printables.com/media/prints/c6a88370-0ca1-4f0b-b413-4f842be6df92/images/12236821_542ca664-7966-4399-8f41-20189a5e3655_edc073fd-6f7f-4b04-b434-88048938acaa/crop_merge1.png)
![Filter for re-using rinse alcohol from 3D resin printing using $5 pool filter cartridge [OpenSCAD]](https://media.printables.com/media/prints/17d3405b-3b6e-43bd-b3f9-88ef6011e5a4/images/10371288_f3c340e3-3d0e-4a89-bfd9-2af2d4b700ae_df51900c-2b1f-4cf6-a17c-cc704cf35ad6/filter_system.jpg)
![MagSafe landscape-mode Charging Stand for iPhone in walletcase [OpenSCAD]](https://media.printables.com/media/prints/037f73c5-a286-483d-bd9d-7927c444a5cb/images/12251377_a630879b-9fc2-46ec-b989-14110ceaa458_fa2cf7f1-7355-470d-9681-8d24cfbe5c4d/z6d_5732.jpg)