Liczymy pasujące modele…
This is a 54mm jet drive that can be used for an RC boat. I used two of them for an electric surfboard. I designed these jet pumps because I couldn't find anything that met my needs. I hope they are of use to someone who is looking for a…
I designed this surfboard in Fusion 360, inspired by the Channel Islands Pod Mod. Included are individual files for small printers, or a complete file for larger printers. It's perfect for a wall display or as a functional surfboard after…
These are the working files for a 3D Printed surfboard I designed in AKU Shaper and exported as an STL. The STL was then imported into Meshmixer and the surfboard model was cut apart into smaller pieces for printing, alignment holes were…
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
These are the router templates for installing Futures Fins finboxes. Router out the slot first and then the flange. There are two templates but also and insert that can use used with the flange template. This allows the routing out of the…
I wanted a model to test Octolapse on my 3D printers that would look cool. I modeled this rocket up in Fusion 360. Nothing else to say about it, it's a simple rocket. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Note I have updated the jigs but left this version up as it might be of use still. New: https://www.printables.com/model/673666-futures-fins-finboxes-router-jigs-updated I created these jigs to help me install the Futures style finboxes.…
These are the router templates for installing Futures Fins finboxes. Router out the slot first and then the flange. There are two templates but also and insert that can use used with the flange template. This allows the routing out of the…
**Updated model again - I updated the model so the mount is shorter (less swing weight), main change is I inverted the dove tail. * Updated mode l - The file title with "update" has a small change where I rounded off the leading edge of…
Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight variances in router bit sizes or printing tolerances. Added a DeWalt base…
Note: I made an updated version of this pod that uses zip ties to secure it. There is much less play in it, I recommend using that new model: ____________________________________________________________________________________ This is a…
This is another update for my foil assist motor mount, this version is shorter than my previous version so there is less swing weight. I recommend printing the cone off in 95A or 64D TPU and the mount in a stiff filament. The big change…
I have a Makita 1900B Power Planer that is 30 years old, it's hard to find a vacuum attachment for the outlet port. So I used Tinkercad and cobbled something together. It works but you can't remove huge chips of material or it can clog…
This is simple jump rope handle. I needed a better handle for a beaded jump rope I had so I made this one. The balls are so the rope can go through it and then it gets wedged in the handle.
This is a 3D-printable mold designed for building a carbon fiber hydrofoil rear stabilizer wing using compression molding techniques (also called forged carbon fiber). I designed this mold from scratch based on some pics of an Axis rear…
I created these jigs to help me install the larger style Futures finboxes. They are sometimes called One Shot or Strong Boxes or trackboxes (for foilboards). Included are jigs for both the 10.75" and 8" finboxes. They both use the same…
This is a template for a generic 10.5" surfboard fin box. Also called a bahne box, US style finbox or fins unlimited. Basically the most common fin box system. You will need a 1/4" router bushing (I.D. 1/4" (6.4mm) O.D. 5/16 (7.9mm)) and…
I thought it would be cool to have a Weeping Angel to hold my phone. This is my first attempt at it. It's high enough that it can hold a 5.5" phone in both portrait and landscape positions. Category: Mobile Phone
I created this handle model so I could install handles in my surfboards. Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4" and 3/8" straight bits). There are alternate files to compensate for slight…
This fixture is used to sharpen the blades/knives of the Makita 1900B Power Planer (35 year old planer). Load the blade in the slot and run a sharpening stone across the top of it. Link to how to use it: https://youtu.be/cRXelLnXk74 Print…
I needed a wedge like tool to scrape out glue that had set between tile group gaps. It's easier to remove it before it sets but sometimes it gets missed, I printed a few of these and was able to remove the glue between the grout gaps…
This is a clip mount for the Normcore V1.1 manual coffee grinder. This mount slides onto the body of the grinder allowing the handle to be clipped to it, similar to how it comes stock on the V2. Also I included a file for a funnel to make…
This SUP handle allows one handed movement of a SUP. You can put your SUP on the roof of your car with one hand or lift it from an awkward position. Included are STLs for installation jigs and bases for a Makita RT0701C Router ( for 1/4"…
I created this scraper after seeing something similar online. It lets you easily scrape the wax off a surfboard. This scraper could be used on other surfaces too such as kitchen counters, automotive gaskets or any place else you need a…
This propeller fits a 6384 brushless outrunner for an efoil or foil assist. I made this for a Flipsky motor but it can fit other motors that are similar. Requires two stainless 4mm bolts and lock nuts. Print in PETG or CF Nylon, etc...…
I needed a bit holder for my drill when switching back and forth between Phillips and Robertson hex bits. Couldn't find a simple one that I could buy so I made one. There is the external holder and 3 different size inserts, to compensate…
A simple mount for the Flipsky Mini V6.8 Plus VESC Mount. Use single sided hook and loop as the mounting straps. Use double sided tape to mount. Print in PETG.
These are parts for making a teleprompter. The square holes are sized for 1" square tubing. See the video for assembly: https://youtu.be/LPBT2AuJd7g 4mm x 5.5mm x 8mm Hotmelt inserts (I couldn't find the exact ones but something like…
I wanted a simple way to mount my Flipsky VX5 remote to my Starboard paddle so I could control my foil assist while SUP foiling in the surf. Flipsky kindly provided the original STEP file for the VX5 remote, which allowed me to design…
To wszystkie aktualnie dostępne wyniki.
