P
PrintablesKyle 🇬🇧
Pallet Coaster
Not really sure what to say here… No supports, 20% infill, print, add beverage? Be ace to see these printed in wood filament?
- Pobrania
- 2477
- Polubienia
- 318
- Ocena
- 4,91
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesKyle 🇬🇧
Voron V0 V0.1 V0.2 First Layer Calibration
Model is 100mm x 100mm x 0.24mm high. Easy to slice and print then adjust z on the fly giving you an ideal visual of your first layer. Also good for running finger nail across for finer tuning of a smooth first layer. (Also a nice easy…
- Pobrania
- 1199
- Polubienia
- 120
- Ocena
- 4,92
P
PrintablesKyle 🇬🇧
Voron V0.1 V0.2 Klipper Expander Cable Duct
Cable duct for Voron V0.1 or V0.2 that houses the Klipper Expander. Klipper Expander allows you to add additional functionality to your V0 / V0.1 when using an SKR Mini or SKR Pio board. I'm currently using it for another NeoPixel plug…
- Pobrania
- 725
- Polubienia
- 178
- Ocena
- 4,94
P
PrintablesKyle 🇬🇧
Dual Cooling Fan Ender 7 Style hotend for Ender 3 V2
Remix of the awesome remix by @Schnabulation I love this hotend cover, but never really got on with the tapping into the print. Considering this moves at some speed whilst printing. So I remixed it to take M3 Heated Brass Insets for all…
- Pobrania
- 625
- Polubienia
- 148
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Removable Trolley Token (UK £1)
Get your trolley, slip out the token, never forget to put it back on your keys...
- Pobrania
- 621
- Polubienia
- 46
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron V0.2 - Display Faceplate - Multi-body
I liked the hexagonal pattern on the new display front, but my overhangs never look great. Massive kudos to the Voron team on the V0.2, that can be found here If you want to print without a multi material set up, I used the following…
- Pobrania
- 407
- Polubienia
- 54
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Mini Stealth Burner Hex Face Remix - Voron V0.2
Quick remix of the awesome Hex faced Mini Stealth Burner by @3Dp-MAMSIH. Whilst the original is fantastic, the placement of the logo made my OCD a little twitchy. This one has a more centralised location. This also uses the slightly…
- Pobrania
- 404
- Polubienia
- 80
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron V0 Display (V0, V0.1, V0.2) Display Knob MMU, Dual Colour
Extruded the hexagon so you can import the 3mf to print it in dual colours. If you want to print without a multi material set up, I used the following instructions Post your makes so I can check out your colour schemes! Also have dual…
- Pobrania
- 378
- Polubienia
- 64
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron V0 V0.1 V0.2 Bed Levelling Squares
As the cantilever bed can be a bit of a pain to level until you're used to it. These simple, wuick squares can give you a nice visual aid. (As a bonus, nice quick and easy print for free prusameters if you post a make) Squares are placed…
- Pobrania
- 276
- Polubienia
- 40
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Voron V0.1 Rear Panel - Top Only
Small rear panel that closes the enclosure but leaves the electronics bay open. Does allow a rear cover to be used if you want and acts as the panel holder for the top corner. Any issues, let me know. Don't forget to post your makes with…
- Pobrania
- 180
- Polubienia
- 57
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Micron+ Smol Hex Skirts (With optional Keystone Rear Skirt)
Whilst the Micron+ is an awesome little scaled down 2.4.. the skirt Hex's weren't scaled down enough and looked too big. HartKs slotted Skirts are awesome, but no bestagons??? So I've created these for the Micron+ (Micron 120 in…
- Pobrania
- 173
- Polubienia
- 58
- Ocena
- 4,33
P
PrintablesKyle 🇬🇧
RasPi 4010 Cooling Fan mount - LDO Input shaper board compatible!
Slight change to the layout of the fan mount, to allow the use of the LDO Input shaper board. There are 2 versions: Display Port This version has access to the display port and the camera port, whilst still allowing the use of the LDO…
- Pobrania
- 157
- Polubienia
- 39
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron V0 Umbilical - V0.2 Hex Frame Mount
Since the V0.2 is now sensorless, there was a hole in the frame mount that lets precious chamber temp out… not any more with added hexagons and serial number! If you don't have access to CAD to change the “Voron V0.2” to your serial…
- Pobrania
- 156
- Polubienia
- 51
- Ocena
- 4,5
P
PrintablesKyle 🇬🇧
Voron V0.2 Rear Keystone Skirt - Meshed
This Voron V0.2 Skirt Remix has a solid bottom layer that is intended to be printed with a higher infill and no top and bottom layers. For printing make sure you add a height range modifier on the lower layers. Up to this height there…
- Pobrania
- 143
- Polubienia
- 40
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Raspberry Pi 40mm Fan Mount, with access to camera port.
Simple Ras Pi Fan Mount that allows access to camera port. I recently upgraded to a Pi4b on my Voron V0 and noticed the temps were significantly higher than the 3b, even in stand by. This mount uses the standard Voron spec heat inserts x4…
- Pobrania
- 128
- Polubienia
- 24
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron V0 Umbilical - V0.2 Frame Mount (No end switch hole)
Since the V0.2 is now sensorless, there was a hole in the frame mount that lets precious chamber temp out… not any more. There are 2x versions: V0.2_Umbilical_Motor_Mount - Use this for the stock Bowden setup on a v0.2 as it has the hole…
- Pobrania
- 117
- Polubienia
- 21
- Ocena
- 0
P
PrintablesKyle 🇬🇧
LDO Picobilical - Voron V0.2 Hex Frame PCB Spacer
Since the V0.2 is now sensorless, there was a hole in the frame mount that lets precious chamber temp out… not any more with added hexagons and serial number! If you don't have access to CAD to change the “Voron V0.2” to your serial…
- Pobrania
- 115
- Polubienia
- 17
- Ocena
- 5
P
PrintablesKyle 🇬🇧
PFA Micron / Micron+ | MDC Magnetic Door Corners
# MDC - Magnet Door Corners Chonky door hinges & corners that are mounted with screws, and have a magnet in each corner. ## Disclaimer **The primary design of this modification requires you to drill your door panel. Drill guides have been…
- Pobrania
- 95
- Polubienia
- 27
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Voron V0.2 - Z Chain Gap Cover
A little piece that fixes an issue that isn't really an issue… slightly over engineered with heat set insert and extrusion mounting hole. For the extrusion mount, it's completely optional, but I already had a pre loaded nut there from the…
- Pobrania
- 94
- Polubienia
- 32
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron Design Cube - V2.4 Serial Request
Voron Design Cube with added text to make your serial request extra fancy! Enjoy, please post your makes! Category: 3D Printing
- Pobrania
- 83
- Polubienia
- 16
- Ocena
- 5
P
PrintablesKyle 🇬🇧
LDO Picobilical - Voron V0.2 Frame Mount (No Y end switch hole)
Since the V0.2 is now sensorless, there was a hole in the frame mount that lets precious chamber temp out… not any more. There are 2x versions: Picobillical_Frame_PCB_Spacer_V0.2 - Use this for the stock Bowden setup on a v0.2 as it has…
- Pobrania
- 68
- Polubienia
- 8
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Ender 3 V2 Creality Run Out Sensor Cable Chain Mount
I have the Creality Run Out sensor on my Ender 3 V2. Link to the sensor kit - https://tinyurl.com/58j5hdmj This comes with a new bracket for the X-Gantry that is wider than the standard one so the sensor has somewhere to sit. This renders…
- Pobrania
- 67
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKyle 🇬🇧
ADXL343 Mount for Micro Swiss NG Extruder
Excuse the poor photos! ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder. A little overkill with heated inserts but hold solid to get an accurate reading. These are the brass inserts I used:…
- Pobrania
- 66
- Polubienia
- 16
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron V0.2 Mains Foot Dual Colour
Quick Remix of the rear foot / Mains Inlet for the new V0.2 to allow a bit of dual colour sexiness on the rear too.. Why would you not want your Voron logo to stand out??? Massive kudos to the Voron team on the V0.2, that can be found…
- Pobrania
- 65
- Polubienia
- 24
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Ender 3 Bed Handle Pi Camera Mount for Silicone Spacers
Remixed this awesome design so those of us with silicone spacers can use it too. Enough room for spacers to expand when tightening the bed. Printed with the flat side down (see Picture) using tree supports. 0.2 layer height & 20% infill…
- Pobrania
- 62
- Polubienia
- 19
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Micron R1 - NEMA17 A/B Motor Mounts
NEMA17 A/B Motor mounts for Micron R1 🔧 Overview New A/B motor mounts for your Micron, that are designed to use NEMA17 motors, with accompanying dual sheer bearing holders. Full bed travel is retained, however you might need to readjust…
- Pobrania
- 60
- Polubienia
- 17
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Voron V0.1 Extended Feet (+8mm)
When using the standard feet, my V0.1 would rest on the Z motor causing a lot of wobble. These feet are extended by 8mm to eliminate that problem. Not too hight that the skirts look daft, and not too low to cause any wobble etc, also adds…
- Pobrania
- 59
- Polubienia
- 13
- Ocena
- 5
P
PrintablesKyle 🇬🇧
CyberBrick - Stillage with Fork Access (Lift n Load prop)
The original stillage / container falls off the forks when being transported. I added the fork access holes like a EuroPallet, it now stays on the forks when travelling. 2 Options available: With Built in Support Without Supports .step…
- Pobrania
- 56
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Voron Design Cube - V0.1 Serial Request
Voron Design Cube with added text to give your serial request a little bit of extra umph! Please post your makes! Enjoy! Category: 3D Printing
- Pobrania
- 48
- Polubienia
- 15
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Ender 3 USB Power Supply for Raspberry Pi
Alternative to using a Buck Converter (although this is technically a Buck Converter). I made this to power my Raspberry Pi using a conventional USB cable. Just makes life easier. Can even charge your phone from your printer if the…
- Pobrania
- 43
- Polubienia
- 17
- Ocena
- 5
P
PrintablesKyle 🇬🇧
Voron Mini StealthBurner Motor Plate & Extruder with larger recess for washers
The screws that secure the spacers to the motor plate have a tendency to dig into the plastic and create their own recess. This mod allows for washers to be used on the screws to prevent that. Don't forget to post your makes and get some…
- Pobrania
- 36
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Micron Really Useful Tool
Just a really useful tool. For when you're building your Micron R1, it helps locate the MGN7 rails and the motor pulleys. The most up to date version can always be found on my github: https://github.com/Jadecky/Printer_Mods/tree/main
- Pobrania
- 34
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKyle 🇬🇧
HPI Mavick Strada DC - Front Shock Tower MV22021
HPI Maverick Strada DC / DC Brushless - Replacement Front Shock Tower. Original Part Number: MV22021 2x Different Versions: Stock - As per original part Heatsets - Added 4x Heatset inserts for the steering arm rather than threading into…
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKyle 🇬🇧
Rainbow Barf Skirt Carrier for thicker cables
Thank you to Maple Leaf Makers for the awesome original. Unfortunately I had no cable flexible enough to solder the cables with them pointing inwards, to allow them through the hole in the rear of the original carrier. This modification…
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.