Liczymy pasujące modele…
Made these battery holders to store in our kitchen drawers. (STORES) AA Batteries AAA Batteries 18650 Batteries (DIMENSIONS IN MM) AA 60x130x58 (HxDxW) AAA 60x130x51 (HxDxW) 18650 60x130x74 (HxDxW) Walls are all 2mm thick How I Designed…
- NO SUPPORTS NEEDED. Print as is (Thank you Alley Cat)!! - (2) M3 x 6mm Socket Head Cap Screws (BATTERY I USED) 504050 - 1500mah https://www.ebay.com/itm/387026120507 (GPS I USED) https://www.amazon.com/gp/product/B09LQDG1HY/ (ANTENNA I…
Tried the others, but they would not fit the servo tester I received. The others were not easy to print the text. So I made a new one that prints text mid layer (with a spool swap). Enjoy! Screws are 2.5mm hex bolt Category: 3D Printing…
(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them! Just wanted to share…
I wanted a tray for my Testors paint bottles and paint brushes, so I made this. I added the logo to the sides. I tried to color them in with black paint, but failed miserably. Perhaps someone could give me some tips. This is a 6x6 and a…
This is a 15/16" or 23.81mm (The larger size) suspended ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-B The red flat piece in the middle is a sample to simulate the ceiling bracket (SUPPORTED…
Bring iconic sci-fi history to your workbench with this massive 20.5" x 10.5" (52 cm x 27 cm) replica of the Battlestar Galactica Viper Mark II! Truly an impressive showcase piece, this model captures the aggressive lines, triple-engine…
My 20+ year old speaker grills started to fall off. Got tired of my 6, 4, and 2 year old kids destroying the B&W 604 speakers...so, I printed new grommet grill holders, and to my shock, worked, without over engineering them. I truly…
Needed a keyfob replacement for my 2014 Jeep Grand Cherokee. Created in Fusion 360 and printed up one really quick. Ebay sells metal ones for $6 shipped. Probably better to do that. But here is an alternative option you can print for…
I made this to hold the included stones and to hold the allen wrench. I printed with PET-CF17, with default 15% infill, etc. I made it so it would work if you had screws mouting the platform or no screws. I only use this occasionally and…
I purchased a cheap carburetor kit with cables from Amazon, for my Yamaha PW50. The cable was to short, and the rubber grommet was way to small, and would not snug fit into throttle hole. So I modeled up an adapter in Fusion 360, and made…
I made a custom electronics tools holder for all of my tools. - Wowstick - Grinder Pen - Xacto - Spudger - Twezzers - Screwdrivers - Brush - Prying tools - Bits - Front pocket to hold misc.
The new DJI FPV Goggles V2 battery kept falling out of my Fatstraps, so I made a custom battery holder, to keep it in place. All better now. Indention on the sides for finger power on power off touch / feel. I printed in PLA, and will see…
Open DSKY - bflores Modified I ordered the electronics from S&T GeoTronics LLC ( https://opendsky.com/ ) via this link: https://opendsky.backerkit.com/hosted\_preorders I paid $500 + $30 shipping for the "Open DSKY Complete Kit" A big…
This adapter works with the “Game Boy Advance SP 3.0 Inch IPS LCD Backlight Kit M2 - FunnyPlaying” from handheldlegend.com. https://handheldlegend.com/products/3-0-laminated-ips-kit-for-gba-sp (INCLUDES) - Top and Bottom Brackets so LCD…
(EMAX HAWK 5 TO SCALE PARTS) (4) 5" Arms 4.5mm (1) Top Plate (2) Support Rails (1) Mid Plate (with 20x20 and 30x30 mount support) (1) Bottom Plate (with 20x20 and 30x30 mount support) (4) 25mm Standoffs NOT INCLUDED (4) 1.5mm Risers NOT…
Wanted to combine my 30 AWG and 36 AWG Bare Copper Wire onto one spool. So I made this spool. Works like a champ. Could have sanded and cleaned up the left over supports better, but hey, its only a spool to hold my wire.. and was happy…
(UPDATED 096-06-2020) Created a smaller version that still fits perfectly. Tried the others but would not work with My Emax Hawk 5, with a capacitor. So I went to Fusion 360 and modeled this up. Fits like a glove. Everything is keyed, and…
Printed in PETG Had to cut the check down a little bit to fit. It fits a USD bill perfectly like glove. Included the Fusion 360 file, so you can easily modify and make it say anything you want. -Thank you to How2Texan for modeling up the…
This is a simple quick item I modeled up to hold the Telsa Cyber Quad Battery Charger. (PRINT SETTINGS) I printed mine in PETG for better heat tolerances. I printed with supports everywhere. I printed with 30% infill and .15mm QUALITY
Motorola Micro Tac Elite Replacement Antenna Top. My kid broke my antenna. So I measured. Printed and replaced the bad with the new. Looks good as new! Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No…
To wszystkie aktualnie dostępne wyniki.
