Liczymy pasujące modele…
This case was designed to hold bigtreetech skr mini boards or boards with ender 3 pro motherboard bolt pattern. Uses m3 screws and nuts. Fan shroud holds 40x10mm electronics fan. Enjoy!
The Sortfinity is an extension of the Gridfinity system designed by Zack Freedman on Youtube. Sortfinity was designed to sort small parts such as nuts and washers, but could be used to sort all types of things. The Sortfinity works simply…
Spew and bubble style all over your wargaming table. Enjoy!
Files are in the right orientation to print. Designed for support free printing This stand has a few useful features and was inspired by my new steam deck oled limited edition. Fan vent cutout to allow air in through the back right where…
The Gundam Kickstand was designed to print flat and quick, with friction assembly. Print a bunch of these in cool colors and share them with me! Might make a stand with led mounts if there is enough interest. I have included a kit card…
These spacers replace the bed springs on ender 3 and ender 3 pro for printers with auto bed leveling such as bltouch. Printed in petg at 35% infill. Category: 3D Printer Parts
You know what they say. If you can't beat um, just run um over. Great for wargaming, paining or just collecting. Go ahead and give it a like too! Enjoy!
These city modes were designed to be played on a hex based wargame map. Each has a simple design so they shouldn't need supports. Remember to share your builds. I love to see what others do with my models. Enjoy!
The Advanced Retraction Test allows the user to tune retraction while taking into account variable distance. This uses 4 pillars that start at 5mm tall and increments by 5mm. 5, 10, 15 and 20mm tall. This allows you to change retraction…
The survival tube is a modular system that lets you print and use as you need. A few quick features: Watertight with 19mm or 3/4in o-ring Build your own with with extensions shafts Floats on water Desiccant holder with the various…
This system (Modular Building and Dungeon System-MBDS) was designed to be put together temporarily with included connector pegs, or magnets to be used and reused. Or to be connected permanently with adhesive. Builds towns, castles,…
I made this pet food bowl insert because my dog is a pig and eats really fast. They make bowls for this reason, but why buy when you can DIY. Easy to wash. I suggest only using food safe filaments. Hand wash with warm (not hot) water and…
These muddy mini bases include 8 unique styles. Great for Warhammer or even some World War dioramas. Enjoy!
Crates and Barrels to fill out your wargame sessions! Enjoy!
The Advanced Benchy is a complete rebuild. The hull is designed to test z gradation, convex to concave transitions, as well as round to hard angle transitions. A so on. It is harder to print in every way. If you really want a challenge,…
The Scythe was designed to give your hotends heatsink direct flow while the 180 degree squirrel cage blower surrounds your nozzle with cooling. Designed to fit anycubic vyper kobra max and kobra plus with a dragon hotend but should fit…
This Hexi-Cloth was designed to be link as many together as you need in you 3d software or slicer and the print in place. Once you have them all linked then scale them up or down as one unit so that tolerances stay uniform between links.…
These chopstick holders were designed to look like classic steamed buns and can be housed inside there steamer for storage. Chopsticks included.
Trek through the sands of time with these cracked desert mini bases. Comes with 7 different bases Enjoy!
Fortify your wargaming table with Hanger and Barricades. Enjoy!
Refine and fill your gaming sessions with MORE SCATTER! Enjoy!
Comes with 8 scenic bases and 8 street texture bases. Enjoy!
Give a but of a Gothic vibe to you minis or diorama. Enjoy!
The tolerance calibration cube is 10x10x10mm and test tight tolerances of .06mm .08mm .1mm and .12mm. It also has two holes, one on each side that test 25% of model scale and 50% of model scale. These holes serve to test overhang. The…
These modular Drawers were designed to be scaled to the size you need and connected as you see fit. With 38 individual parts there are endless combinations. Note: Keep in mind that when scaling to do so in a uniform fashion across all…
SV-GBox This screen mount was designed to solve a few small issues with the original. Features Rotates the screen further forward for better readability. Adds USB access to the front of the printer. The link to the passthrough this was…
This screen case was designed to mount the bigtreetech tft35 v3 to an enclosure. Uses all m3 bolts. Enjoy!
Blame Bill from the Youtube channel BillMakingStuff. I saw him building models for the tabletop game TONKS and figured why not design a stubby little tank for TONKS. Enjoy!
The Steam Breaker is a steam powered great sword that hits like a train. Enjoy!
No rest, no mercy will e given you your printer. This Benchy has Benchy infill so you don't have to. How did I do it? I don't want to talk about it.
The Biqu H2 Turbo fits both V1 and V2 of the H2 direct drive extruder hot end combos. The fan duct attaches directly to the H2 so it will fit any printer that is running an H2 already, you will just need your own H2 mounting plate. All…
The dual prong and trident handheld display stands were inspired by a model posted by Snoopy31195 . They are designed to print quick while being esthetically pleasing and keeping filament usage to a minimum while maintaining stability. I…
Laser Blade is a futuristic unitread laser slinger. Enjoy!
Designed to pass filament through an Ikea lack table smoothly.
Measures in millimeters (mm) as it should be! Measures up to 70mm. Print all parts without supports in orientation provided. Slide the slider onto the ruler body, put a dab of super glue on the female fastener and then press in the male…
1.2.5 Updates to the SkrPi are as follows. Improved air vent optimized to reduce overhang on the print. Reduced mounting angle on corner mounts.(Also for printability) Internal intake cover (Also also for printability) Zip tie slots for…
ZChain was designed to print flat and fast. Frees up counter space! Uses friction fit links and spacers to hold the roll center from the inside. Screw mounts are included to hang a ZChain horizontal if desired. 60mm, 70mm and 80mm mounts…
The SkrPi Desktop features everything the standard SkrPi does. The mojor differences are as follows. Has a cover and feet so that it can be used as a standalone enclosure. Feet serve to allow the intake fan to draw air from the bottom of…
The SkrPi is an electronics enclosure that is designed to be mounted under an enclosure and still give access to usb and sd on both mainboard and the pi. The hole patter fits skr mini boards and original creality ender boards where an skr…
Designed to hold lathe tools for the Wen LA8800 lathe stand. No Supports needed STLs have been uploaded in print orientation 4mm mounting holes for nuts and bolts or zip ties (This is how I mount them in the pictures) Tool hole is 28.86mm…
Comes in 3 sizes 205x205mm 100x100mm and 50x50mm The idea of the 3dMat is to have both a real world printed version of the matt and a 3d model of the mat. So when you want to model something from the real world to 3d all you do is put the…
Don't be a muggle and calibrate with some class. Think outside the box as you watch these beautiful boxes print. For a good time join the Voidstar Labs Discord https://discord.gg/MhpBhWd6
To wszystkie aktualnie dostępne wyniki.
