Liczymy pasujące modele…
Update I have re-moddled it as the old file was a bit of a mess, new file and STEPs in the ‘Remodeled’ folder in the file list. (The fullsize versions still use the same mag catch.) Also, please use the print orientation shown in the…
Update: Updated the model and re-did the interface for the Amomax side. Slightly thickened the whole thing and generally made it a bit nicer. Printing Instructions No support needed in the nut hole on the bottom. For settings I would…
Notes I only have a WE MP5, so my dimentions may be slightly off for other brands but this should work on pretty much any MP5 including MP5SDs. I have had one make now confirming fitment on a MKE AP5 (Turkish MP5 clone). Hardware If you…
As they don't seem to make even airsoft versions of these anymore so I designed my own. I don't have one so I was just modelling it using of off-axis photos from google so its not going to be exactly the same as the original, and now…
Hardware To attach the Amomax hoster to this I would recommend an M6x14mm countersunk bolt. Versions There are two versions, standard and non-standard. Standard Standard uses the normal mounting solution with that bit at the top that…
Hardware Two small pins, I used a sewing needle cut down. Two small springs, about 4mm diameter. (One for the mag catch and one for the BB stopper) One BB Printing Print on the edge as shown in the photos. No support needed Assembly Put…
Description A Magpul style handguard for the WE Apache. Installation You may need to drill out the front pin holes to 6/6.5mm to get a snug fit. I've drilled the left hole out to 6mm and the other to 6.5mm to get a good tight fit. There…
I made the railed version first and thought it might be cool to do an Aimpoint T1/2 footprint version (a bit like the real 30mm Aimpoint mounts KAC made) so I designed my own. Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5,…
I have printed mine in PLA+ at 40% infill, 4 walls at 45°. Seems to be holding up so far but give it a go and let me know.
For using the G&P flashlight handguard on the WE Apache MP5 (Should also work with the VFC but not tested). print side on. Mine doesn't look very good in the image but that was due to multiple attempts to glue random things in there…
Updated the magwell to use threaded inserts instead of square nuts as I had a few issues with them spinning. Also moved the screw holes in the base plate out a bit as I found the heads of the bolts could cause the metal MP5 mags to be…
Adjustment With the FreeCAD document you should be able to adjust the length, hight and screw clearance. You can also choose between D and C cell models. You can adjust the values in spreadsheet and hit enter to update the model. Hardware…
Description Adds a carabiner loop to the bottle for those who don't use the standard strap point on their Nalgene or similar bottle. For example, if you use the capCAP+. This just goes onto the standard strap point and gives you a hole to…
This is one part of a delta ring, the barrel nut, that should allow you to use a proper delta ring and the TM RIS handguard. This then allows you to do do things like run a M203 under barrel grenade launcher with the top of the RIS still…
There is room for a small-ish O-ring to help tighten up the fit with the receiver but I tried it without and it wasn't much worse so might not need it Just fits into the receiver and then screw on the front sight post. The TPU version…
A system to sort the cards in the Ultimate Collection a bit better. Print 3 of the ‘FullSize’ models and one ‘Partitioned’ This will give you 3 to use for the monster, tresure and loot decks. Then the partitioned section has four areas…
Printing Just print them outside-down. The screw counterbores shouldn't need supports, most modern slicers can automatically bridge the inside. This image is looking up from below the build plate to show the bridges in the counterbore. I…
Adjustment Currently the default inner bore is 4.4mm, if you're going for UK power-limits, I think a slightly tighter 4mm is better, I've heard that is what the Waldo Crimson NPAS uses, this should basicity bring the adjustment range down…
The VFC RAS does fit the WE Apache as standard but I found the rails were all angled down slightly and it didn't lock up very securely. This is two models that should fix that angle and help lock it all down. It also has the added bonus…
A model for some replacement nozzle guides for those who have stripped the threaded holes on their bolt. (like me) Just print up-ended like in the screenshot below or in the provided Gcode, with the spikes facing up and a small amount of…
Information ‘YAHH Remix.fcstd’ - This is the FreeCAD file (ver 0.21.2), you can use this to change the dimensions of the model by entering your desired measurements into the table ‘Values’. (You shouldn't need to add clearance, it adds…
This part is designed to help remove almost all left-to-right wobble in the barrel of the WE Apache. Front to Back Wobble I have included provisions for a M4x4 or M4x5 grub screw that you install from the front that you can loosen until…
This is an almost drop in replacement for the standard rear half of the nozzle. This one has a small crossbar that, when used with a rocket valve with a grub screw, allows you to adjust FPS with a 1.5mm hex key. Hardware & Assembly You…
Versions Two versions of the internal driver support ring are available. One is the standard stock ring as a replacement part. The other is modified with and additional cut-out, this allows it to be used when modifying the DT770s to have…
Printing I would reccomend printing at an angle so that the first layers of walls run the length of the strap. I would also use fairly high wall amounts so im using 4 on sides top and bottom.
Resizing To resize the model for your callipers open the FreeCAD document, go to the spreadsheet and update the values to the next nearest .5 of a mm (you can add some extra clearance if you want at this point). Then you can export the…
Description An adaptor piece that allows you to securely place a Hakko tip cleaner (599B) in the sponge hole of the Metcal stand (WS2). Hardware 1x m4x10 grub screw (may not be needed, just for making the fit a bit tighter.)
Printing I would recommend printing the part top down so the face that contacts the nozzle is on the bed. I would also advise using a glass bed so the face is smooth like the origional part. As for supports, I suggest the standard ones…
Case for some Senner earplugs I brought so I can take all four with me. Once printed you should be able to just click on and off the lid without too much force. Printing Shouldn't really matter what you print it in, I printed mine in PLA+…
A filing jig for use with Calrad 30-711 3.5mm TRS chassis mount snap-in Jacks
This is a monolithic/one piece version of my previous WE Apache nozzle design. This uses a standard replacement VFC NPASs, so if you want to print one, my Parametric VFC NPAS . Or, for purchasable ones, either the Waldo Crimson NPAS or CL…
A replacement earcup bracket and cover for the Studiospares M1000/M2000 MK1s. Printing I have had mine MJF printed in PA12 but tested in FDM PLA and it also worked fine. Hardware Needed (Each) M3x10 button head M3 nut
Attempts to fix pouch flop and lift on single-pass / short-strap MOLLE pouches. Standard NATICK snap straps often leave slack at the bottom, causing the pouch to pull forward when opening Velcro. This clip locks the snap into the lower…
To wszystkie aktualnie dostępne wyniki.
