Liczymy pasujące modele…
For travelling etc, especially to keep those encoders from snapping. Depending on what keys exactly you use for space/enter you might need to edit the model: https://a360.co/44bco5l
Wydruk około 6,70 €–8,19 € nettoWstępna wycena jednego wariantu
0.25mm nozzle, 0.07mm layers, the pogopins have 1mm max diameter. In this particular case it's actually for reading back the flash and reverse-engineering the firmware (assuming it's not encrypted but I doubt it is). Fusion link…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used the BLE400 development board with a random STM Nucleo board (to have SWD programmer) to program the BTLEJack firmware on the Core5122 modules, then wire the module and FTDI UMFT234XF USB-Serial adapter together (6 wires, 2 power,…
Wydruk około 3,75 €–4,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
I've always been a bit scared of bumping the din-connector and breaking something, now it's secure. For other format downloads (including original Fusion design) go to https://a360.co/2RA1wIP Designed for M3 machine screws, I used 2.5mm…
For metric places where the UNC bolts are not readily available and you need to mount something with "the camera adapter thread". In this case it's the Intel RealSense depth camera that has that thread and when used with the adapter for…
My bike is Ducati MTS GT 2020, I'm 185cm tall, this is relevant to the parts where I talk about seeing the instruments and gps displays, your experience will vary based on your bike and height, download the Fusion project and adjust to…
Use the detent tool https://www.printables.com/model/1150135-safety-detent-tool-for-ruger-pc-carbine-and-22 when removing the cross-pin or you will have to use it later to re-install the detent and spring (and there is a very real risk…
The help avoid having the spring go boing, or to re-install it after this happened.
A case to hold RPi Zero, PiCamera (in my case NoIR version) and the Pimoroni HyperPixel display. NOTE: For the old 3.5" version!! I don't have the new display to test with so you will have to import the Fusion360 design (see link below or…
2023.04 update: the holes for the gopro mount apparently created a stress-riser or something and the mount snapped off, I'm pretty sure glueing it on would work (and will likely repair mine with glue unless I decide to mount the gopro…
Mount YMD09 macropad on the throttle on X52 HOTAS (the mounting plate should fit a bunch of other throttles too). I used 3 links, you might need a different number. Use M4x16 bolts and M4 nyloc nuts to assemble the whole thing. I used…
Convert M6x25 hex/allen key bolt to 5/8" spigot Goes great with https://www.printables.com/model/520331-eurobrite-mount-100150 High layer heights and plenty of perimeters recommended, I used 0.6mm nozzle. Fusion model at…
I always use NGen but this should work with anything, flex filaments could be a particularly interesting approach but printing the penholder might be hard with those. You need the pen holder (the loose fit one with magnet is IMO nicer…
The tolerances are very tight (I tried with looser ones first wasn't happy) so you will probably need to use a bit of fine-grit sandpaper. The print files are for 0.6mm nozzle for speedier printing and I use NGen for everything. Two…
And I mean really annoying, annoying enough that I made 5 versions of this just to get two lamps replaced. Fusion model if you need to adjust angles or something https://a360.co/3OaDSRO
stick thick side to the spool center, thin side to cordless drill and start spooling. I'm using this to spool filament out from 2.2kg spool to smaller one since the big one has too much inertia to feed from directly. Category: 3D Printer…
The P-01 can use longer mags but there is a risk of over-insertion when reloading with the slide locked back. These will help. For two different mag models, can't recall the exact models.
Add support for the cable connector to avoid connector damage in case of bumps etc. There is one layer thick feature to avoid adding long support structure, you need to cut that out after printing. Tested with the older CM2 version which…
To wszystkie aktualnie dostępne wyniki.
