P
PrintablesBuzz
Intex Pool Nozzle (Dyson Bladeless Fan Style)
90° Nozzle for Intex Pools
- Pobrania
- 1217
- Polubienia
- 191
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesBuzz
Yet another LED digital clock with WS2812B-LEDs...
I needed a simple clock in one room, so I designed one. 24h display to be equipped with WS2812B LED-Strips with 60LEDs/m. Each digit will need 15 LEDs, two on each segment with one LED hidden between to segments. I did a lazy wiring job,…
- Pobrania
- 410
- Polubienia
- 260
- Ocena
- 5
P
PrintablesBuzz
75cm Wind-Power-Plant as desk fan
75cm high wind-mill model with motor works great as indoor fan with an gear motor I used a maxon 24V gearmotor with Dia22mm and 4mm shaft In my version all printed in PLA without support fits within a 19cm x 19cm print bed (diagonally) (I…
- Pobrania
- 322
- Polubienia
- 56
- Ocena
- 0
P
PrintablesBuzz
pool fountain / waterfall
I updated oldfart's idea to my needs: Gardena coupling (needs O-Ring for tighter fit) different inserts (140°, 80°, 20°) Clamp for pool rail (optional) Clamp is designed for M6 square nut. All parts print without support. Add a drop of CA…
- Pobrania
- 212
- Polubienia
- 76
- Ocena
- 4,5
P
PrintablesBuzz
spices shelf / rack
a simple and small shelf / rack to store our spices underneath a wall cabinet in our kitchen mount it to the top or to the wall, add several units for longer shelfs (one unit for two spices is 158mm long) ideal for Ankerkraut spices :)…
- Pobrania
- 123
- Polubienia
- 29
- Ocena
- 0
P
PrintablesBuzz
Electricity Meter with ESP32 Cam
Inspired by JomJol's program for the ESP32 ( https://github.com/jomjol/AI-on-the-edge-device ) and MakerMeik's Video Tutorial ( https://www.youtube.com/watch?v=iUgxwbfkIqU ) I took MakerMeik's design and made it printable without support…
- Pobrania
- 81
- Polubienia
- 21
- Ocena
- 0
P
PrintablesBuzz
PIR-Sensor / Motion detector with Arduino Nano
Small housing for an Arduino Nano and a PIR-Sensor / Motion Detector to control a LED-strip automatically cover for ceiling mount with screws or cable ties, connect cover and housing with two M4x10 and hex nuts Designed for a Ardunino…
- Pobrania
- 80
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBuzz
Wemos D1 / DHT22 + BM180 logger housing
New version for less temperature difference due to ESP heating In this version a measure ca. 0.3°C difference between an open (breadboard) design and the D1 and the sensors in this housing. In the old version it was around +6°C delta.…
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuzz
Soil humidity sensor (D1 Mini + 0.96" OLED)
A small WIFI connected plant soil sensor Adding a Wemos D1 Mini and a 0.96" OLED to this Aliexpress Soil Sensor got me a Wifi connected soil humidity sensor to upload the Data via MQTT to my database. The housing is quite simple, with a…
- Pobrania
- 64
- Polubienia
- 11
- Ocena
- 5
P
PrintablesBuzz
Dell Precision Laptop Fan stand
Very special interest build: Cooling stand for Dell Precision 7540 Laptop with forced air flow My Dell CAD-Laptop works nice but has some very annoying fan sounds when working CAD assemblies Therefore I built a laptop stand with a…
- Pobrania
- 62
- Polubienia
- 16
- Ocena
- 0
P
PrintablesBuzz
door stopper for cats (defined gap)
When our cat enters the room, she opens the door very wide. Which is not wanted to keep the bedroom dark and cool. So I added a small piece with some 6mm magnets to the door (just clip on with some foam tape) and a magnetic counterpart on…
- Pobrania
- 53
- Polubienia
- 41
- Ocena
- 5
P
PrintablesBuzz
Modular LED PingPong Ball Video Wall
LED-PingPong Ball Video Wall inspired by bitluni's version -> https://www.youtube.com/watch?v=ikhZ34WgObc&list=WL&index=27&t=0s Thanks Bitluni! -> https://youtube.com/bitlunislab -> https://twitter.com/bitluni Using WS2811 LED chains…
- Pobrania
- 44
- Polubienia
- 17
- Ocena
- 0
P
PrintablesBuzz
Power Meter D1 Mini SML Module
Little adapter to mount a D1 Mini (ESP 8266) directly onto the power meter I used a 5mm Photo-transistor (BPW 40) to monitor my smart meter IR output I used 12pcs 6mm x 1mm magnets from Amazon together with a DIN 125 M16 washer to…
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuzz
Yet another filament spool holder - but with hexagons!
Two rollers, each with 2x bearing 626 (Do=19mm, Di=6mm, W=6mm). Connected with a M6x100 (DIN912) hex screw and two washers (Din125, M6) on each side. In the backpiece two square nuts DIN557 M6 are used. You can mount two of these units…
- Pobrania
- 37
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBuzz
Sponge holder with climbing kitten
I used the "hanging kitten" outline to design a sponge holder for the kitchen Prints easy without supports. I used PETG, but PLA will also work fine. The tray features a drain to the front to let the sponge completely dry. Width for…
- Pobrania
- 35
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBuzz
Qidi Plus4 lid raiser - the bulky one (for Qidi-Box)
I upgraded my top lid raiser after installing the Qidi-Box on top of the lid. The filament changer adds a lot of weight on the top lid, for PLA the hot air has to leave the print enclosure, therefore the raiser. I designed it much bulkier…
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuzz
vertical blinds motor with D1 mini + OLED
I took the base idea from the "automatic blinds controller" and adapted it to my means. Vertikal blinds, 9mm distance chain, no Alexa but sensor control With two light sensors I can define half sun and full sun. There are 3 positions of…
- Pobrania
- 31
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBuzz
Raclette / Fondue / Crepes tabletop extension / storage space
I took a 80 x 30cm shelf (from OBI) and mounted 6 printed feet to it. So you can place the Raclette on the first floor on the table and use the space below as storage for ingredients. Additional advantage: the Raclette does not heat up…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuzz
double sided LED Pole for DMX control
I searched the shops for a slim LED Pole mit RGB in the back and white in the front an DMX-control, couldn't find one, so I built it myself. Design goals: slim, low-key vertical light bar with RGB to the back and white to the front.…
- Pobrania
- 19
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBuzz
cocktail / drink cooling plate for intex pool
a cold plate for cooling drinks while you are enjoying the day in the pool.... I made a plastik housing which clips onto the corner pieces of an intex-pool. Add a metal (aluminium) plate on top, seal it tight with some glue and use cold…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuzz
wall display (LED-Strip + E-Ink)
I made a combined display with an LED-Strip and an E-Ink display. Purpose is to display stuff like temperatures, which don't change often on the E-ink-Display and often changing values like photovoltaic power with the led strip. With a…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuzz
e-Ink display / thermometer outdoor logger housing
two part (outdoor) housing for a 2.9" waveshare e-ink display and a ESP / Arduinio controller Front part with rain protection for display (big roof over display) Back part has a upper compartment for the controller with cables connected…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuzz
Wireless handheld controller with round LCD and JogWheel
I needed a wireless controller to set all the parameters on my huge interactive moon lamp. Based on a 1.28" round LCD display , a KY-040 rotary encoder and a ESP32.C3 with external WIFI antenna this controller has a static mounted display…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBuzz
Huge interactive moon lamp installation with 13 stepper motors
80cm wide artificial moon lamp with flexible elements to simulate waves and ripples on the moon surface, paired with controlled lighting around the moon disk. The combination of waves over the rigid surface with hard side light is very…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.