142 modeli
Printing: Print can be done with rough settings, 0.25mm with a 0.4 nozzle are fine to go. The "Roller" part needs support for the lower side, since they have to be printed standing. Assembly: Just smack both halfes together, placing one…
Clamp your knife in place, fix the wet stone on the slider and just sharpen your blade. This fixture is ready to go with only 3D printed parts and therefore needs no extra hardware. You might add a couple of M3 bolts later (or similar)…
They come in many different shapes and forms. Can be equiped with 4x2mm or 6x2mm round magnets in order to have them stick to metal parts (like on cars) or to stick to each other. If you have no magnets, the marker works fine without. The…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 8mm hole with at least 1.5mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. No support…
This spool holder organizes your cables neat and tidy. It protects against unwanted unraveling, is modular and can be used with the gridfinity eco system. Great to use for outdoor repairs too, since one can carry them without the spool…
Features: Is fully 3D printable. No extra hardware needed. Fits a big variety of toggle switches. The compliant spring gives the cover a satisfying snaping motion. If you have a lot of switches to cover and want to tell them apart, you…
This 608 bearing is fully printable, robust, reliable, somewhat dust/dirtproof and easy to assemble. Since filament has a tight tolleranced outer diameter, it makes for the perfect roller in this bearing. Even if your printer has its…
This stand is fully printable and has a knob to tilt your phone. It also features a recess in order to have your charger attached while using. Print all parts in the given orientation and use a layerhight of 0.2 for the threaded parts…
This is inteded to be used for display, cosplay or educational purposes Printing: Print all parts in the given orientation. Support is needed for the pegs. I remixed the original model and took the details from this YT video. it will also…
Easy and fast to print in one piece and if you want, also in four pieces without support. The details make it nice to look at. Different versions available if you want to scale or modify it. Intended to be used as a 1:10 scale model but…
This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…
It can be attached to an opened plastic bag, containing cereal, rice, coffee beans or what ever comes in bags. Printing: Print all parts as you desire. 0.2 and 0.3mm layer hights work fine. The wedges on the hub might curl a little…
Can easily be pulled out if you are done with your condiments. No need for unraveling the whole tube again.
These bobber come in different shapes and sizes. They are modular and can be assembled regarding to your specific use case. Can be adjusted and customized on the fly without tools Printing: Print the BobberBody and the Marker in the given…
Easy and fast to print in one piece. If you want to put stuff inside you can also print it in two pieces. The details make it nice to look at. Different versions and .step available if you want to modify it. Intended to be used as a 1:10…
NOTE: PLEASE READ BEFORE PRINTING Im happy that you like the dry box and give it a try but it uses much more filament than it is worth. Dont get me wrong, i still love the design. this is the reasons i still have it online. If you just…
If You have some nearly empty spools laying around, you can print some of these mixing spatulas with the infamous last meters. They come in handy for mixing 2 part compound adhesives, glues and sealants. I have alway some spare laying…
Robust and versatile tent peg for bolting down with a cordless drill. The swiveling top part makes it easy to bolt down the peg, while it is allready attached to a tentline. This is because it can rotate freely. If you have no 10mm socket…
This hook releases its load if you turn the little lever on the side. The force you need for this is independent from the load wight. If you attach a smaller rope to it, you can trigger it from a remote position or from the ground.…
This spool holder organizes your cables neat and tidy. It protects against unwanted unraveling, is modular and can be used with the gridfinity eco system. Great to use for outdoor repairs too, since one can carry them without the spool…
Features: Is fully 3D printable. No extra hardware needed. Fits a big variety of toggle switches. The compliant spring gives the cover a satisfying snaping motion. The .STEP is available too if you have to make it fit for some weird…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 11.5mm hole with at least 1.5mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. No support…
This ball valve can be used to reduce flow a little or shut it completely. It is fully printable and has a ¾" tread on both sides, so you can use it with a lot of other hose connectors you might already have at home. Printing: Print all…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 5.5mm hole with at least 1.0mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. However,…
Features: Prints in one part Fits on glass bottles (Sodastream crystal) Fits on plastic bottles Easy on your printer Many different designs to choose from Printing: Choose the design you desire for your bottle type and print it with at…
This bag clip is designed in order to hold bags tight, even with very thin bag material. It is print in place and comes in many different sizes. It can be operated with only one hand and is made to last. Printing: Print in the given…
Used for regulating airflow in a hose, like used for air stones in fish tanks. Printing: Print all parts in the given orientation. 0.2mm layerhight is recommended. Use: Feed the hose through the valve and tighten it for regulating the…
Using this, you can adjust the flow out of your garden hose from a soft mist up to a hard water jet. It also features some different conncector types so you can also fit your own hose adapter to it. If you cant find anything for your…
Prints just fine with only 2 perimeters (0.4mm nozzle) and no infill. Also no support needed For reference: 1ml suitable for measuring spices 2.5ml equals the volumen of one average sugar cube 5ml-15ml Usefull around the kitchen 20ml-25ml…
It can be adjustet for the size of seeds it is used with. If big seeds are used, the bolt is turned outwards to enlarge the slits. If smal seeds are used, it is turned back in to make the slits smaler. This ensures evenly dispensed seeds…
It features a compact design, since they are intendet to be used in a mobile medic unit. The Tube_Holder_x70 is made to sit on a lab desk, so it might be to big to be carried around. Note: Because the nature of FDM prints, the parts…
Lets air in while using, so the water comes out easily and nicely Prints in one part and without support. Feel free to use rough settings. I made mine with a 0.6 nozzle and 0.35 layerhight and it works just fine. If you dont want to print…
This sanding stick takes strips of sandpaper and holds them firmly in place while using. It also comes with customized plates showing the used grain size. Printing: Print as you desire. 0.4 and 0.6 nozzles worked fine for me. 0.2…
This buckle can be used with 25mm (roughly 1.in) strap in order to make it a sturdy tie down fastener. Makes it easy to attach stuff to your backpack, like sleeping bags, mats and jackets. Also great for straping your bag together in…
It is a scaled version of the original but with a solid back. It comes with two feet for putting it on display CHANGE LOG 26.03.2023: Added a version without the little “R” legal modifier in the upper right position
This chain is easily printable in one piece and does not need any brim or support. Add chain links or hooks as you desire in slicer. Layer hights from 0.1-0.25mm are good to go, depending on the used scale. Intended to be used as a 1:10…
This marker tree holds up to four marker and makes for easy to recognize features for your scanner. It comes in two versions. One with magnet and one with a threaded base. It is intended to be used with 4x2mm round magnets Printing: Just…
The “Bottom” part features a latch to slide your RFID card in without it falling out accidentally. The “Top” parts look very impressive if you add a color change just for the last seam on top. The Top_Blank can be customized with own…
Can be clamped to your desk and holds your lamp in place. The Base features an insert which can be customized in order to make it fit for any kind of lamp, if your particular model has slightly different dimensions. You'll also find the…
Easy and fast to print in one piece. The details make it nice to look at. Different versions and .step available if you want to modify it. Intended to be used as a 1:10 scale model but scaling to your needs is easy to be done. Note: The…
Please use the new and improved Version 2 https://www.printables.com/model/1125479-aa-battery-case This battery compartment is fully 3D printed and features a printed switching mechanism. Also available is one version for store bought…
It comes in two versions. One without function an one with removable lid. Printing: Print parts in the given orientation with the parameter you desire. Want to organize your newly aquired bunch of boxes or looking for some alternative…
This trap protects your salads from unwanted guests like slugs and snails. It can be adjusted in order to spare snails and only let slugs trough. Its optional “EmergencyRamp” makes that insects or little frogs who fell in accidentally,…
Fill one side up with pepper and the other one with salt. By twisting the plugs, you can open and close the slit on the shakers side, to dispense some flavour on to your meal It is best be printed in its given orientation but due to its…
Just fill it with water, stick it in the planter and have your green companions not die during vacation. For once at least. Holds around 280ml (~9,5 oz). The neck is shaped in such a way to make it robust against breaking while inserting…
This cassette style spool holder takes an empty filament spool for storing cables. It is fully printable but can also be fitted with regular 608 bearings if you want. for winding large amounts of wire, a handy powerdrill tool is also…
This opener should fit on all common 40mm watches with a threaded back plate. Some higher end watches need a specified torque value applied for closing, to be waterproof again afterwards. There fore this tool features a 3/8'' drive in the…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 14mm hole with at least 1.5mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. No support…
Just put it on your filler port and rotate it to lock it in place. After filling your tank, rotate it counter clockwise to remove it. The thread for the Gardena part is the ½" type (G20), so you can fit anything you like there too. Best…
This box crate resembles a wire frame and is used on top of a 1/10 scale euro pallet. It comes in a “high” and a “short” version. Printing: Print all parts in the given orientation. For the Side parts, choose 6 perimeters (0.4 nozzle)…
This fastener is intended to be used with packing ribbon for presents. You can use the fabric type ribbon or the fully plastic one. Even though it is really tiny, it still works like the real deal! They are also an funny addition for…
This smal cable organizer fits in the boxes foam cutout and holds the cable harness neat and tidy. No bends and knots. It also has a place for the power supply Printing: Pint all parts in the given orientation with all settings as you see…
It is intended to replace a E10 Socket without the need for additional hardware or soldering. Two versions are available. One for surface mounting and one for hole mounting. If you need to make them fit for your particular use case,…
They come in many different shapes and forms. Can be equiped with 4x2mm or 6x2mm round magnets in order to have them stick to metal parts (like on cars) or to stick to each other. If you have no magnets, the marker works fine without. The…
Just print it in the given orientation, up to 0.25mm layer hight (0.15-0.20mm is better). If you want to modify it, you can use the .step files If your screw cap wont fit right, you might have to work it free by simply twisting it tight…
Due to its shape it is able do be deformed in such a way that it moves almost like flexible material. This makes it realy gentle on the door but ensures it staying firmly put. The barbs on the lower side provide additional grip,…
It will fit a big variety of different switches to protect. (12mm bore). It also features additional holes in the cap, in order to feed a thin wire trough. by this you have to tear the wire before using, indicating a use has taken place.…
Just print it out of any material you like. PETG worked best for me but even PLA worked just fine. Just feed it trough some dors, locks or what ever and snap it shut. Afterwards you have to break it to remove it. CHANGE LOG 15.02.2023:…
It is a scaled and modified version of the original but with a solid back. It comes with two feet for putting it on display
It holds your iphone 15 Pro (Adjustable for others too) in place via the magnetic charger. Due to the iphones function to display a clock-screen while charging, this stand also makes for a nice tableclock. The phone is released by simply…
Made my ones out of black ABS with 0.2 layer hight. They work fine for allready 2 years under harsh conditions. would not recommend PLA therefore. Dont forget to apply new sealant under the caps during replacement.
This airstone is easily printable and can be adjusted to your needs Printing: In order to be safe in your fishtank, i recommend using PLA. Print all parts in the given orientation. No support needed. Layer hight of 0.2 (or finer)…
These are used to make 3D scanning a little easier. Because one side is opened up, you can give most objects to be scanned a steady rest. If you want to use them with a little putty, just rotate the closed side up. Printing: Print in the…
This holder needs no extra hardware (except for some cable). It comes for 4, 3 and 2 cells. If you dont want to use the integrated switching mechanism, you are going to find a version with no switch and also a version to be used with…
This decoration star is fully printable and can be fitted with LED lights. It is intended to be used with standard 6V light bulbs, running on battery power or straigt from an USB power supply. These bulbs (E10 Socket) are often found in…
This MMU buffer casette can stay in place during filament loading. Especially convinient if the spool you want to change, is located at one of the middle slots. The filament feeds right through and gets sorted automatically inside. No…
This box crate resembles a closed box frame and is used on top of a 1/10 scale euro pallet. It comes in a “high” and a “short” version. Printing: Print all parts in the given orientation with the parameter you desire. If you add a…
It is a scaled version of the original but without the seam and made for standing upright I filled the inside with sand to make it more hefty but found out later that normal infill will give the same result without making a big sandy mess
This magnet toy can be used in a play kitchen or play store. The food can be “cut” between the magnets and so it comes apart like real food. The plastic knife is dull otherwise and poses no harm. Printing: Print all parts in the given…
Used to press some clay in to a brick form. Easy and fast to print. The .step is available too if you want to modify it. The bricks are intended to be used as a 1:10 scale model but scaling to your needs is easy to be done. Note: The…
It is designed in such a way to maximize the amount of silica gel one is able to fill in. It also has smal end caps to be as slim as possible, in order to be used in boxes with very little space. You can use coarse print settings. 0.3mm…
This air vent cover provides adjustable flow and can be modified for your needs with the .step file. Should fit to 100mm pipes. The knob part has to be glued in place by a drop of superglue
Scale it to your needs and make yourself a weighted companion cube to be a nice penholder, paperweight, desktoy or trow piece out of clay, concrete or even playdoh. Assembly: This step is not neccesary but it makes assembly much easier.…
It is easy to print and even easier to use. Soap bars with 110x65x40mm (the big ones) will fit in. If you want to customize your box, add some logos, ornaments or text, you'll find the .step for download too
This is basically the original design by 3DZ_CUSTOM but without the back part. Therefore it can straight be used as spray stencil or wall art if you fancy
Easy and fast printing. Material saving and modular Printing is best be done with only 2 perimeters (0.4 nozzle), 2 top and 2 bottom layers. A 0.2mm layer hight works best. Choose around 20% lightning infill If your Reels are seized, the…
It is designed to hold a spool of sensitive tape and has a handy toothed area for ripping the tape. It seems that a 0.2mm layer hight works best to generate sharp edges. 0.25 and higer dulls them to much to be of any help anymore. Note:…
Printing: Just print it in the given orientation with the parameter you desire. Looking for a nice Euro Pallet or barrel to put this on top of? Maybe have a try with this collection .
If your towel has no hook for hanging, just clamp this one on it. Print in the given orientation with 0.2mm layerhight. Use as many perimeters as you can get (around 5). Prints fine with no support.
This fastener is intended to be used with packing ribbon for presents. You can use the fabric type ribbon or the fully plastic one. Even though it is really tiny, it still works like the real deal! The MooringPoints are to be used with…
All parts can be printed in the given orientation. The TripodSwivelHead needs some support
Please use the new and improved version: https://www.printables.com/model/1224192-dispenser-for-coffee-stencil Just twist it like a pepper mill. It can be filled from the top with fine powder and has a cap to prevent it from sweetening…
Features: Fits like the original thing Interchangeable with the original Three sizes available Easy on your printer You can choose between a version with no pegs and one version with the little legs allready attached. The left one is the…
It is a scaled version of the original but with a solid back. It comes with two feet for putting it on display
One can slide in up to two cards ( one ID-card and one RFID-card for example) and they are easily slide out again by pushing down the latches with your finger. Just print it upright in the given orientation, no support needed. Use of PETG…
Has to be printed out of PETG since PLA seems to be not compliant enough. Three perimeters with a 0.4mm nozzle (or 1.2mm wallthickness) with a layerhight of 0.3 and no infill, makes it realy lightweight and fast printing. You can decrease…
Catches bottle caps inside the handle. Caps can be released by twisting the bottom lid. Caps stay inside even if opener gets tilted or turned. can be attached to a lanyard. Handle and head are shaped ergonomic, so that persons with…
Gives Cosmo some additional expresions and a face, which can be printed on its own. Printing: Print all parts in the given orientation with 0.2 layerhigt. No support needed. A manual color swap for the faces gives a nice look to them.…
Looks cool if you ad some colorchanges to it. Got this idea while watching a YT video about drawing the simpsons. Thougt it might look funny on some gear
Keeps the pacifier from falling to the ground. Printing: Print everything in the given orientation with 0.2mm layerhight. No support needed. Using PETG is recommended, since PLA might deform over time. After printing KeyRing part, the…
Features: This switch is intended to be used as reference. This might come in handy if you design something and you have to gauge the size in the real world. It is also a great show piece for FDM printing on your work desk. Might work as…
Just a little box with no functionality other than to look great. Printing: Print the box in the given orientation with the parameter you desire. Want to organize your newly aquired bunch of boxes or looking for some alternative designs?…
This holder slides on top of a window or door, for you to hang some lightweight decoration. It is adjustable to the size of your window or door frame. No tools or glue required. can easily be removed. Printing: Print all parts in the…
Fits on a 180mm gear size Prints without support CHANGE LOG 22.05.2023: Added a little radius to the studs to make it look better
It is best be printed from PETG due to its outdoor use case. Standard irrigation hoses (~6mm) can be easily snaped in and it also works great with Gardena irrigation systems (micro drip)
I designed this beacon to be used with a piece of outdoor machinery, with light to moderate weather conditions in mind. The grooves holding the “Diffusor” are designed in such a way, to hold light rain away from the LEDs, but you can…
Replaces the most common cam locks found on all sort of furniture. print it in the given orientation with 0.2mm layer height. use as much perimeters as you can make it. I recommend using PETG because PLA tends to creap under load over time
Works on shirts, bracelets and shoe laces. Different sizes available.Comes in two versions. One regular and one having a smal lock mechanis in order to stay in place. Printing: Print in the given orientation with a layerhight of…
Made to fit for a DM556 stepper driver but others might work too See drawing with measurements for detail. .step available too if you want to modify it. If you ae looking for a DM860 holder, mybe have a try with this one:…
