Liczymy pasujące modele…
I made this high-torque handle for water isolator valves to make them easier to turn for situations where the valves are hard to reach or get tools onto or for people with reduced mobility. I've made 2 versions, one to fit valves with an…
This little set of tools is to release the crimp-on terminals from JST-XH (2.54mm) plugs so the shells can be reused. To use, push the cable as far foward in the plug body as it will go, then squeeze the tool down tight over the release…
In order to reach the full 330mm height capacity claimed by Troodon the 2.0 Pro needs some spacer blocks to rise the lid so that the bowden tube doesn't get bent up against it. I've designed these blocks to do the job while using not too…
Step into the realm of whimsical wonders with this Brutalist Peg Basket, where functional meets the absurd. The basket’s design is a nod to the sharp, angular lines of Brutalist structures, but with a playful twist. Perfect for the…
The british S6 gasmask was first released back in the 1960's and by now the elastic on the rear straps has completely perished on most of them rendering them unwearable. I designed this head harness to replace the cloth & elastic straps…
I've found myself with not enough space in my storage dry-box so I've designed this spool divider system so that I can keep more than one type of filament on a spool and still have all of them accessible and ready to print. I made this to…
This is a printable replacement for the RJM-01-08 slide bearings used in lulzbot mini printers. I've modified it with a helical inner pattern to increase the contact area and support that it provides so it'll be fairly durable when…
I made this design for a friend of mine who loves bears! I've provided recesses in 6 coasters to hold drinks up to 85mm in diameter. The whole thing is held together with magnets that have to be inserted during printing into the pockets…
This splined socket will fit the splined nuts on the head stock bearing top cap of Yamaha Fazer 600 motorcycles 1998-2002. These nuts are found just below the top triple clamp, and the socket makes it possible to use a 32mm socket and…
This bracket is designed to support 80mm diameter round-bottomed fire extinguishers with a little more style than the conventional ones they come supplied with. It's got clamp arms to hold the extinguisher in place and a norman arch…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the Klipper Chroma Module (KCM) onto the printer. This bracket is designed to fit where the LCD screen…
This conceptual Christmas tree reimagines festive form by stacking a series of smaller, inverted trees into a striking sculptural silhouette that plays with symmetry, rhythm, and visual balance. Each tier creates a cascading geometric…
This puzzle is based on my "Conceptual Christmas Tree" design which I've scaled up and chopped into 22 pieces which interlock to form a full tree that's 400mm tall and about 175mm across. Each Tier of the tree is made of a selection of…
I've got one of the 868Mhz Meshcore repeaters with the 5.5db 40cm antenna but it came with a pole mount bracket and I needed wall mount. I've made this wall mounting bracket with an offset to hold it away from the wall and up a bit so…
This is just a quick little design to provide a cable rack that will fit into standard Ikea cupboards. This design is intended for cupboard who's shelf-pin holes are 5mm in diameter, spaced 32mm apart and are 28mm from the front of the…
This design is a set of plant-pot holders covered in a semi-random pattern that reminds me of raindrops falling into a pond. The pattern is scaled with size for the various different pot types so that the raindrop patterns get a bit…
This design is a set of plant-pot holders covered in sets of nested round buttons / bumps that are generated in a semi-random pattern. The pattern is scaled with size for the various different pot types so that the button patterns get a…
I'd noticed that the XY100 (Also known as an iMakr STARTT ) printer we had was sometimes resting on the bottoms of the Z axis motors which isn't ideal. I designed this foot / base so that the acrylic main panels would be supported without…
This is a housing for the A20 single board computer / Dev board from Olimex. It's styled after the Wilson hall building at the Tevatron facility. For best effect (I.E. resemblance to the original building) it's best to print everything…
At the workshop we've been seeing a lot of heavy use on the laser cutter recently so there's been a couple of laser tubes that have been worn out. They look too cool to throw away though so I've made this lamp design to make better use of…
This coupler will let you connect IKEA Bergshult shelves end-to-end without any gaps or end-grain showing. It's 20mm wide and has a 5mm central bar and it reflects the edge-trim of the shelf so as to be as unobtrusive as possible. You…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to move the Z endstop up by quite a large distance in order to accommodate the considerably larger Chromahead that…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the ChromaHead to the printer, and while I was redesigning the head mounting plate I took the opportunity…
For an upcoming projecting I needed to upgrade our old TronXY XY-100 (also known as an iMakr STARTT) to be able to run Klipper so it needed to have it's original brain pulled out and replaced. I made this adapter board to sit in place of…
As part of our effort to upgrade our TronXY XY100 printer (also sold as an iMakr STARTT) with a Coprint system, we had to find a way to mount the CX1 modules to the printer and none of the existing bracket designs would fit here. This…
This model is a replacement shell for the GPS module in a NextBase Duo dashcam, to replace it if it breaks cause they're pretty weak where they attach to the suction base. Print both sides in a heat and UV resistant filament, I used ASA.…
The hinges on the Olsen and Smith 803L outdoor store box seem rather easy to damage so I made this model for a replacement. Since this is for outdoor use I'd recommend the use of ASA filment and as some strength is needed I'd advise a…
Step into a world of timeless grandeur and intricate detail with this Gothic Revival-style bookcase. This design features bold arches, ornate pediments, and a symphony of intricate carvings that capture the essence of a true classic…
To wszystkie aktualnie dostępne wyniki.
