Liczymy pasujące modele…
Just a rudimentary, stylized snowflake made to resemble a circuit board for the technology-minded among us to integrate into our winter holiday. Designed to be hung from a tree, with the option to hang it from any of the six points to…
Just some quick tombstone models I made for a miniature diorama project. These range from 43 to 71mm, but there shouldn't be too much of a problem with scaling them up, or even down (but only a little or you'll lose the details). They are…
3-drawer storage unit to hold 5" (125mm) sanding disks. The drawers are removeable so you can take them to where you need them (the optional retention springs add tension and a soft stopping point when you pull the drawer nearly all the…
Latching box to safely and securely hold about 8 plastic scraper blades or 10-12 steel razor blades. Design uses 1.75mm filament as the pin(s) to hold the lid to the box. I printed the lid topside-down, but whatever works for you; the…
Full disclosure: I set out to make a more compact version of the HYQ14FBW Toyota key fob for my 2024 Corolla Cross Hybrid, but by the time I modeled in the ability to hold the valet key ("Full Size"), it's not too far from the original…
Latching paddle clips with around a 30mm diameter handle. There are LEGO-style pegs and hollows so a pair (or more) can be attached together to keep them all in the same place for when you go to use them again. Flexible version allows for…
Heart design utilizing a circuit board style pattern. Does it make sense? Not at all, but people seemed to like the snowflake version I made for Christmas (https://www.printables.com/model/1086840-cyber-snowflake-christmas-ornament).
Small parts storage stays that can fit two-dep in an Altoids tin. I made several varieties that should hopefully suit a range of purposes. Just pick and print whatever two you'd like and stack 'em in the tin. There's a grip area in the…
I designed this cane to go with a Victorian-style costume that I wore to attend a “Dickens-themed” Christmas event, though I admit that the chronology is a bit off for that and it's more of an art-deco, 20's-30's style of Egyptian…
A clip to hold your curtains closer to the wall and assist in preventing light from bleeding through around the curtain. One version with holes was specifically made for mounting to a tie-back that I have, so it might be a little specific…
When playing with a ripcord-launched spinning top, I had the thought that is would be cool to modify the top to have blades to make it fly, like some toys of my youth. I also thought that it would be cool if it would still spin like a top…
Sorting tray with funnel at corner to easily return small items to container. Nothing too fancy, here. Main area is about 100mm by 60mm, and pour spout is 30mm wide by 20mm long. Spout has ramp at front to facilitate sweeping objects into…
There was certainly simpler ways to seal the entry point for the Starlink cable (or any cable around 6.86mm) entry point, but I saw a design that I wanted to try a variation on. This model is set up to use M3 threaded inserts and machine…
I've done it, everyone! I've reinvented the wheel! But seriously, this is just a simple model with a straight-forward design that seems to work well for my purposes, even if it's something I could have downloaded from dozens of…
Insert to organize and store 7-piece drill stop set in an Altoids tin. While this is specifically made for a Harbor Freight's Drill Master brand set, it could theoretically fit any brand in sizes 1/8 in., 3/16 in., 1/4 in., 5/16 in., 3/8…
I know this isn't a unique idea, but cable management boxes are a bit pricey and I needed a small one that had a pretty securely locking lid since the application was going to be wall-mounted. To that point, there are slotted screw holes…
I designed this model to assist with replacing line cards in chassis switches, as the cable slack sometimes makes it difficult to maneuver the card with the Ethernet cables left attached, and you would need to plug each cable back in its…
Ornaments made to subtly showcase an interest in Japanese culture. Three designs framed in the tsuba of a katana, available in either a round or square shape variety. Designs are as follows: - Mt. Fuji - Sun sets on snow peak Reflected in…
This isn't a remix, though I did see the same idea from multiple other users on Printables (whose names that I don't recall) and decided to make my own since the ones I saw were flat-topped instead of tapered or rounded. Now that I've…
UPDATE: I had troubles with the spring strength as well as engagement tooth angle and fidelity printing in the orientation I needed, so I have created a V2 that has a “tooth” bar that prints horizontally on the build plate (indicated by…
If you don't care about the “why,” skip this paragraph. I know that it seems counterintuitive that I would have created this model as a means to ENHANCE security, but here's the use case; cash registers were being utilized basically just…
I'm going to level with you; the 1x1 units costs as much in filament to print just this bin as it costs for the whole setup of bin and housing from Harbor Freight when they are on sale ($2), but figure this was worth having so you can…
This was originally for a Christmas “tree” made out of old PCs and other equipment for my department (IT, obviously, picture is included). This model holds 8 sticks of RAM to be the tree topper. The original model was designed for a flat…
Hexagonal Christmas tree sculpture that doubles as a fidget toy, or you can choose how to orient the levels to suit your taste.
The Storehouse 4-inch stacking tilt bins from Harbor Freight (SKU: 56327) are a fantastic deal and a very functional product, but there are certain types of hardware that are small or I have a small quantity of that don't need that…
This might be a bit of a niche thing, but I am involved with doing event setups where I need to use about a dozen bungee balls for cable management purposes, so I designed this dispenser for that purpose. The dispenser holds about a dozen…
Slight variation on my other Cyber Snowflake design where I added a circular backer so I could print it to look a little bit like an actual circuit board, but it could look nice with a transparent backer and colored snowflake, white…
Just a friction-fit retention method for HongWay brand (and potentially others) wire clippers. Print in place.
Just a miniature factory model made to hold a few cigarettes (1-3) for your desktop, etc. This was just a dumb idea I had and executed in about 30 minutes of design time, so please don't judge the quality/execution too harshly; I'm aware…
Holiday-themed dice spinner for tabletop gaming. From top to bottom, the die values are as follows: D4, D6, D8, D10, D12 and D20. Spins pretty well and easily, but if you lift the layers above the one you want to spin, it's even better.…
To wszystkie aktualnie dostępne wyniki.
