Liczymy pasujące modele…
Print as you normally would. I used PETG @.2 layer height with .4 nozzle. They should be glued in place on the original model directly above the center of the roller. Thanks for the original model @LukasCenovsky
This is a Rhino roof rack mount that I made for another user. It is not intended for mounting your StarLink when in motion but only when parked.
This project is for those of you who own a Starlink rectangular dish and are brave enough to cut that dish up to remove the directional servo and stem. Why would you want to do this? I do a lot of RV camping with our 18ft trailer and we…
AVRO ARROW CF-105 If you don't know the history or the tragic story of its abrupt cancellation you should do a deep dive on the internet. There is plenty of material there. If you found this model as a result of a search then you probably…
This is a remix of Adam-M ’s amazing design on https://www.printables.com/model/211679-catapult-card/user-gcodes All credit goes to Adam. The purpose of my remix was a way for me to learn more about Fusion 360. I wanted to [re]make a…
This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thingiverse.com/thing:5893999 The video showing Everlanders design and printing can be seen here:…
I needed a mount for my StarLink antenna that I could adjust to the angle that I needed for my roof. I also wanted it to be sturdy and robust for peace of mind. I have printed in PETG but if you have good success with ABS, I would suggest…
Simple ethernet/CAT5 cable clip. Wanted a clip that I could mount and then come back and run my cable. It's frustrating when holding a cable, a clip, and a screwdriver.
Simple 810 drip tip. Print with PETG or other food safe material. For best finish print at .12mm, 100% infill, make in several colors :)
A friend of mine spent several years serving in the Canadian Military, as he put it, “ In my home from hell. Diesel fumes, sleep sitting, and no space.....would never trade it for the world. ” He asked me if I knew where he could get a…
Wanted a knob other than the standard/stock swing-tab bolt that comes stock with the HEQ5 mount. Had tried several designs that just didn't have the clearance or meant that I would have to modify the stock bolts. This solutions allow you…
Prints in two pieces and does not require support. I printed in PLA at a .2 layer height with a .4 nozzle and 20% infill. The design has guide holes to match the two pieces together using two short pieces of filament. Enjoy!
Crashed UAV fridge magnets. I split the body of a UAV I made in Fusion and added two holes for 6mmX6mm round magnets. Printed with PLA 20% Infill
@Patix made an awesome dirt bike. It needed a rider. Was printed at .2mm with PETG. Will need support where appropriate.
Printed with PETG. Used 2 M3X8 screws and 2 M3 knurled nuts for easy on/off. My .stl has a dogear as I had also originally tried to print in ABS and this was necessary to prevent warpage/lifting. Thanks, ChokletMoose and Sneaks for two…
Items you will need; Cardboard tube 110mm X 24mm ID, 27mm OD (or cork sheet to line motor tube) Parachute cord (approx 150cm) Parachute (45cm to 60cm) Dog Barf (Fire resistant wading) Two-part epoxy (5 minutes) 24mm Rocket Motor (Aerotech…
Print no supports. It does not have a screw closure but it fits very snugly. If you look inside the Kraft peanut butter lid it tells you the diameter, in my case (and country) it is 89mm.
The print in the photos is PETG @ 0.2mm. The two holes are for your pick tool and/or pipe cleaners. Included the Fusion360 file. Enjoy!
The ball should be printed with support for better bed contact.
All files are ready to print; use support if you wish. For the polar bear face, you can change filaments at layers or paint the outlines. Each of the four paws is unique, so they have been labeled left front (LF), left rear (LR), right…
This was my idea to have an external cooling option for the FLIRC case. The power supply can be fed through the opening on the side where the camera cable exits. The design is in two halves so that no supports are required and the halves…
To wszystkie aktualnie dostępne wyniki.
