Liczymy pasujące modele…
BMW 5 series (E39) silhouette wall art. For the true Gearhead! Can be placed on a bookshelf or attached to a wall with some blu Tac, sticky gum. Someone asked me if could do some wallart based on the iconic BMW E39, i could not find a…
Latch for the excellent Clicky-Clack Fridge Door mod by @whoppingpochard. This latch has the Voron logo as an inlay so no MMU needed. You can also opt to remove the inlay and just have the logo embossed. If you like this model, please…
You can scale the model, but do not scale Z or the color swaps will be at the wrong layer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+…
Give your Moxbox some extra flair. You can scale the model, but dont scale Z or the color changes dont line up. You can find my other HomeLab logos on my profile. Print at 100% infill with a layer height of 0.08mm with a base layer of…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ WHITE Transmission Distance: 4 (TD probably dont matter) PLA+ RED Transmission Distance: 3.5 (TD probably dont matter) Swap Instructions:…
Mount for adding a 2510 fan onto the back of an LDO Nitehawk36. This uses the holes in the PCB (Rev C. version 1.4) so it should work for any Nitehawk mount you choose. Work in progress, but fully functional. Things to know: You do not…
Was asked to help with a solution for mounting 600mm high 4mm thick plexiglass screens to a desk. On Thingiverse someone used it to build a 3dprinter enclosure. Could not find anything on this website, so i made my own solution. Perhaps…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D RED Transmission Distance: 3.5 PLA+ GST3D BLUE Transmission Distance: 3.5 PLA+ GST3D…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 300x300mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm…
A stand to show of you are proud of your Klipsch gear. Can be printed separate to do a color swap, parts can be CA glued but might not need it. I have included the files i used if you want to do a variantion on this. Be loud and proud! If…
For mounting a chamber thermistor on the gantry, but this time with the Voron logo the right side up. Includes the Fusion file so you can change the thermistor size for you liking. To do so, change the ThermistorSize parameter.
Who needs a labelwriter when you have a 3dprinter, some M3 gridfinity labels.
You can scale the model, but do not scale Z! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Black Transmission Distance: 0.3 RED Transmission Distance: 3.5 WHITE Transmission Distance: 4…
A little filament painting of the Home Assistant logo. I am putting it on my MoxBox that hosts Home Assistant for me. But you could also put it on the housing of a Raspberry Pi. You can find my other HomeLab logos on my profile. You can…
A pack of remixed knobs for @K-Studio.ca excellent Build Plate Cleaner Microfiber Holder. I contacted K-Studio.ca and have permission to share this. https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder these knobs…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D RED Transmission Distance: 3.5 PLA+ GST3D ARMY GREEN Transmission Distance: 8.5 PLA+…
Remixed of the remix model to have the LDO and or Voron logo.
Remix of the original cover by @irwtdvoys. This also covers the led and adds a little Voron flair.
A nozzlebrush and purgebucket for your Sidewinder X1 3D printer. The bucket attaches magnetically to the holder with 4 6x3 magnets. I printed it with 0.25 first layer and 0.2 layer height. 3 walls and 10% infill. If you mirror the holder…
A DIY vacuumforming table (300mmX170mm useable area) using a 3Dprinted box and hoseconnector (35mm ID) in addition with some lasercut 3mm plywood. This solution does not need a dedicated heater you can use a heatgun to heat PETG sheets. I…
Handles for a pivot rod with internal dimension of 14mm. If you print this, posting a make will be highly appreciated!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D GREY/SILVER Transmission Distance: 1 PLA+ GST3D YELLOW Transmission Distance: 4 PLA+…
I have included the HueForge files and the describe.txt files. I have used this model for the frames: https://www.printables.com/model/783801-parametric-frame-for-hueforge-filament-paintings Swaps are as following: Project: Porsche1.hfp…
Someone mentioned that the file is broken (STL), this happens when you split the parts and arange the plate, there still are thin slices that also get moved around and break the part. I have uploaded a split parts STL remix for that.
If you broke the needle chuck on your Fengda FE-130 airbrush you can fix it with this easy print. Parts can be ordered but with shiping its more expensive than a complete airbrush. I cut the brass part and superglued this print onto that.…
I klipperized my Sidewinder X1 and i wanted the USB connection to be internal. I also use a Mini12864 screen and the included cables where too short to reach the MCU in its original position. With this bracket you can make the USB…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D RED Transmission Distance: 3.5 PLA+ GST3D WHITE Transmission Distance: 4 Swap…
Just a reminder, that you want to chill the F out 😂 If you print this, posting a make will be highly appreciated!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x100mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.4mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x100.44mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.5mm…
Used to suspend a square led tile with paracord for photography. Can also be used for other square objects. For instance this LED tile Is also great for a airbrush paint booth light this way. If you print this, posting a make would be…
The part “Gantry mount - Angry eyes” has the eyelids as an MMU part.
Remixed the hose connector to a screw on clamping style, sized for a Henry vacuum, but could be connected to a Parkside shop vac with a straight pipe connector.
If you dont have, or dont want to use the big footprint of a parasol base. You can print these and fill them with sand or quickcrete and then glue on the top. The round hole in the top is the size of a standard PVC pipe. This way the…
I used 10x3x2 mm magnets for this. I have included a test piece for the magnets so you can scale to size.
I remixed the extruder knob for the Galileo2 standalone extruder (G2SA) to include some swirls. You can split the STL into parts or use the 3mf file.
Same as original but with 6x3mm magnets (Voron spec). You can split the 3mf file.
I have always wondered how people hang up these strips in and around the house without making a mess. So i made a quick fix in Fusion360. Use some doublesided tape to attach it to any surface.
These risers raise the table 4cm so a wider variaty of chairs can fit under the table. I have included the Fusion file if you want to change something.
Project: Stormtrooper.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Like the original by @AllanFonroques only extended 3cm to clear the flatcable.
Extension arms for your digital calipers, adds another 100mm extra space to measure stuff that does not fit the calipers. These are not ultra precise, but will get the job done for most projects.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D Black Transmission Distance: 0.3 PLA+ GST3D BROWN Transmission Distance: 2 PLA+ GST3D BLUE Transmission Distance: 3.5 PLA+ GST3D…
A stencil for the LDO motors X Voron logos. I use it to airbrush a little extra flair on my stuff. You can paint over the little sprues afterwards.
Holder to keep the CA glue and activator together. Fits various spraycan sizes, and a 1oz (28.3g) glue bottle. If you print this, a make would be highly appreciated!
An airbrush stencil of the BTTech logo
Remixed the Tobsun DC-DC Converter mount to use heatsets.
multicolor for + and - for the cover
The swap was modelled to be done with a 0.25 baselayer and a 0.2 layerheight.You can split to parts or objects inslicer. Do the swap on layer 1 and back to the main color on 2.
Skirt mesh inlaypieces for a V2.4 350 back centre piece. Slice to your liking without top and bottom layers. It might be a good idea to print a testpiece and see how it fits before you print the whole thing.
A stencil of the Polymaker logo.
Remix of the original to do a colorswap
An airbrush stencil of the Phaetus logo
To wszystkie aktualnie dostępne wyniki.
