Liczymy pasujące modele…
I found this dragon prusaprinters.org/prints/31578-dragon by prusaprinters.org/social/70229-albaro_3d but it was in one single piece. I used meshmixer to slice it into pieces. I sliced it for printability with minimum supports and maximum…
[Update] There is now also a stackable tray, labeled versions for all boxes and a half-height version of the smallest box that can stack 2 This is a small parts tray with a large variation of boxes. The tray is designed to have the max…
Print the 20-sided core, 19 tetrahedrons and one foot. Spray in Gold. Use superglue to assemble. Insert LED's & Battery case to your liking. 5% infill or less recommended.
Infill samples 3mf file for PrusaSlicer / Slicer. Not all fit on the print bed at the same time. Use the eye-logo to hide some and reshuffle them on the printbed as needed. All infills are 15%. This has a color change for the last layers…
This model has a number of parameters to customize. These are: LidHeight The ratio body-2-lid vertical seperation InsideWidth / Height / Length As saved, the inside is variable and the outside = (inside + walls). If you want the outside…
[Update 2] Added the v.3 files. These are more stable and should open/close/shut easier. [Update] Added the v.2 files. This version is crush-proof, should have less grind in the hinges and an easier to snap-in lock and on top the hinges…
This is an EXACT copy of the original + new Feet https://www.thingiverse.com/thing:2825717 The only thing that changes are additional Feed I designed. If you made the original already, you can still print/paint/glue-on the EXTRA feet…
This is a sliced-up version of https://www.thingiverse.com/thing:2091732 It's enabled to insert a 3mm LED in the front and use the trigger with a push-button and a 9v battery in the grip. Recommended to print in colored (red) PLA and then…
This is the numbers game as posted to reddit here: https://www.reddit.com/r/oddlysatisfying/comments/goj9ka/the\_way\_in\_which\_the\_digits\_fits\_into\_the\_frame/ You'll likely want to scale it down to 25%, then it should print in one…
Power Supply for LED driver. Needs 2 M3 screws and bolts to secure the device to the case. CANNOT be printed in PLA! The powersupply risks to get above 50 C hot and might melt PLA plastic. Ideally print this in ASA, ABS or similar…
Case to hold the KETS02 with all accessories. In order to keep it compact, the cap is placed into a space under the pen. The soldering tips have their own holder that can be placed below the USB cable. The soldering tips are released by…
Wall thickness is 2mm, top diameter is 200mm, bottom is 17mm, neck height is 20mm. Prints without supports. Recommended to print in PLA, PETG should work fine as well. I created this to pour Silica gel from an oven tray where I dried it…
PLEASE read the full instructions BEFORE you start printing anything. This is not a professional grade project. You will have to compensate for my lack of experience making something like that and adjust depending on the results of your…
A Nespresso Pro capsule dispenser to attach on a fridge with magnets. Holds 15 capsules. The magnets are embedded in the print. You need the exact magnets and stop the print at the right height to insert the magnets. It's designed for 8mm…
This is obviously not a strong protection for the phone. It's meant to make it lie flat on the table to better be able to write with a pen on the screen. I hope it gives still some small protection but that's rather a side effect. How…
This a holder/flip for Nauticam Macro port and 2 different INON diopters. Features sunken nut casings. The diopter holders are customized for those I have. There is no guarantee that they fit for you. I highly recommend that you go to…
This is an extra-compact container for AA-Batteries with friction-fit lid. It usesd only 84g of filament and the minimum space possible for the amount of batteries stored. After importing it into the slicer make sure to split the model…
Recommended to print in PETG or ABS/ASA. Due to the shape of one of my diopters, a sabot ring s required to hold it properly. I ultimately had them machined out of corrosion-free aluminum since the plastic broke. They might have to be…
This is a 4-part print that does not need any supports. Print in any material you want. I recommend to put a 1mm padding foam adhesive into the lid to prevent the watch from rattling around.
Under-Table holder for Jabra Evolve Link Edit on Tinkercad: https://www.tinkercad.com/things/9hZhWbEVaVY-headphone-holder Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Filament: Verbatim PLA Transparent…
To wszystkie aktualnie dostępne wyniki.
