Liczymy pasujące modele…
This is a remix of the original cable ramp to make it longer (250mm). I paused the print 3 layers from the top to swap to a different color. Printed in eSUN PLA+ black and yellow. No supports needed. Same license as the original.
This remix extends the mounting surface by ~10mm to make room for Ego trimmers with an adjustable handle like the ST1510T. The older style trimmers still fit, but have bit of room to slide back and forth. I printed mine in Polymaker…
This is a remix of the linked player inventory for Wingspan. I removed the birds underneath to simplify the model, and increased the height of the walls around the cube & token holders. Holds all 8 action cubes and up to 4 food tokens in…
I recommend printing this in ASA (or at least ABS) for the best outdoor longevity. I printed mine in Polymaker Orange ABS, 0.25mm nozzle, 0.06mm layer height, 20% grid infill.
This is a remix of byWulf's end of round goals frame to add a slot for each individual goal. The goals are a little tricky to get out on one side, but it's good enough for me. If you like this model and want to give back, please consider…
Embed 25mm NFC tags in these models for use with the open-source iOS productivity app Foqos . Insert pauses in your slicer at the appropriate layers to insert magnets (for the brick) and NFC tags (for the brick and keychain), plus a color…
The wormholes have threads that print flat and screw in to the bases. I wanted a mechanism that wouldn't come lose when picking the wormholes up, but that wasn't permanent so you could disassemble them for easier storage. The screws &…
This is a remix of the Voron serial plate to fit the LDO Serial Plate that comes with Voron LDO kits and mount it underneath a 2020 extrusion. The under-extrusion mount uses two M3x12 SHCS and two M3 hammer nuts. Attach the serial plate…
This is a 2020 extrusion mount for a 16 MP Arducam Autofocus camera customized for my Voron Trident. Mount it in this order: Use an M3x8 SHCS and an M3 hammerhead nut to attach the 2020_extrusion_mount to the extrusion. Use an M5x12 BHCS…
This is a bike pump mount that fits under a water bottle cage. I remixed the original to fit my Topeak Road Morph G pump which is 22.5mm in diameter, and changed it to have a single larger slot to fit the velcro I had on hand. It should…
Use these files in SuperSlicer to generate two-color meshed skirts. The mesh object is 1.6mm high, so add a PAUSE in your gcode to switch colors at 1.8mm layer height. All parts are oriented flat for printing and easy importing into…
These exploration tokens are very thin and should be quick prints. I recommend printing with 0.4mm nozzle, 0.2mm layer height, and swap colors at 1.2mm. Cultural: Blue Hazardous: Red Industrial: Green Add them to planets at the start of…
For each token, print two halves, an aligner peg, and a base. Use the peg to help align the two halves when gluing them together. I recommend first printing the pegs & bases in a single color, then printing the token halves with a color…
EDIT: I now recommend printing a Nevermore Mini instead of a BentoBox. I used a Delta FFB0424VHN 4028 fan from Digikey . ---------------------------------------------------------------------------------------------------------------- I…
These are replacements for the Husky logo on the front of Husky workbenches . I've printed v6 and v7 and they fit great (v7 pictured). Make sure to rotate the model 180 degrees so it's face down with the pins sticking up. Material : PLA,…
This is a remix of LDO's expansion pcb spacer to fit KB3D's fan splitter PCB used to power up to five 12/24 volt fans together. Use M3x8 SHCS and M3 hammerhead t-nuts to mount the spacer & PCB onto a 2020 extrusion. Material: ABS…
This is a case for a raspberry pi 4b + the Geekworm heatsink/fan without the screen or the pi cam mount per the original model. I also included a remix of Malolo's vertical stand to fit this slightly wider case. RPI_4_Case_B is the remix.…
I wanted to tone down the bright neopixel LED lights, so I added a 0.4mm wall to act as a diffuser. I printed mine in Polymaker white ASA and it works pretty well. Leave a comment with other filament colors that worked for you. Print…
This is a travel box for Radlands Super Deluxe Edition with the Cult of Chrome expansion (synth cards only). I printed the base and lid with a 0.6mm nozzle at 0.3mm layer height. Not made to fit non-synth cards (sleeved or unsleeved). I…
I remixed these American Mini card holders to add a variety of heights. The height at the end of each file name refers the max height of a stack of cards that will fit. Tested with Sleeve Kings 8801 60 micron sleeves
This battle dice storage box for Twilight Imperium 4 was inspired by u/MacBryce's Battle Dice post on Reddit . The idea is to have a separate set of dice with the numbers highlighted to show when you hit for each combat roll you may need…
A War Sun for your Christmas tree! Print the top and bottom (the top requires very minimal supports in a few places). Use super glue and the alignment cubes to attach the two halves together. Slip the collar on top, then insert the hook…
On Specialized Front Rack & Adventure Plate , the headlight mounts so that it sticks up over the top of the rack, making it difficult to carry anything with a larger footprint than the rack/adventure plate. I designed this adapter to…
For the LDO version, insert the print into the U-shaped cutouts on the back of the bed and screw an M3x8 SHCS up from the bottom of the bed. For the MRW version, insert an M3 heatset insert, then insert an M3x8 SHCS into the pictured…
This is a replacement stake for these ALEPOD solar pathway lights . Requires supports. I recommending printing in ASA. If you like this model and would like to give back, please consider buying me a coffee . EDIT: 5/8/26 - The original…
This is a holder for the clickyclacky door with added space for 3mm foam on the door extrusions. Use 2x M3 hammerhead t-nuts and 2x M3x16 SHCS to attach each holder. The parts are named for hanging the door on the left side of the…
This is a 3d printed version of the metal brackets used to hang the wooden valences for my blinds. I designed this to print sideways with no supports. I used 2x5mm wood screws to attach the brackets to the valences (0.07x0.19 inches)…
This is an ultralight 2 gram replacement for the 7 gram adapter that comes with the Aerogogo Giga Pump Air. I recommend printing in 95A TPU. If you like this model and would like to give back, please consider buying me a coffee .
This is an ultralight 3 gram replacement for the 9.5 gram F1 adapter that comes with the Flextail Zero pump. I recommend printing in 95A TPU. If you like this model and would like to give back, please consider buying me a coffee .
To wszystkie aktualnie dostępne wyniki.
