Liczymy pasujące modele…
A 60° turn is sufficient for opening. Inner size: 48 mm diameter, 17 mm height Glue part 1 and 2 together. Edit 2023-02-02 3V2.stl: Stronger hold Edit 2025-05-30 with RSDOC file for DesignSpark Mechanical (delete .txt)
After Mr. Fehse stopped producing his parking disc , I printed one for myself. I have omitted the suction cups. There are now 2 mounting holes for the padlock (attach to the mirror) and they are further from the edge, therefore more…
Instead of the lower screw cap, a funnel can be screwed on for easier filling. Print with PET-G. Best to have clear filament for the container and an identifying color for the top cap: White for salt, red for chili, black for pepper, etc.…
Three countersunk screws M3 x 10, three lock nuts M3 Best to print with ASA filament, or also with PET-G. No PLA. When printing 193 mm high. Remove the original fender: Unscrew two screws and the two reflectors together with the black…
For harder filament like PLA or PETG, the inner end can be fixed in a clamp. The extruder can pull the filament out of the clamp and use the end detection to utilize the material to the end. See pictures. Printing with PLA, with PETG the…
The ribs in the middle of the compartments make it easier to grip washers. They can also be used to double the number of compartments. If your slicer can handle variable layer thickness - slice the area of the ribs with a thin layer…
Just plug it on. Print with ASA oder PET-G.
The ribs on the circumference make the knobs less slippery. The original knobs are easy to remove. Help with a spatula. The steel leaf springs of the original knobs must also be used in the printed knobs. Fit the knobs so that the leaf…
The mounting screw in the original bottle holder is unscrewed. The insert 1 is inserted into the center console. Make sure that the recess on the inside of the base points in the direction of travel (the insert is not symmetrical). Insert…
You need 3 ring magnets 8 mm diameter, 2 mm thickness, 3 mm hole.
The leaf spring clamps the cap on the battery. Printing with PETG. With PLA, the spring effect would quickly diminish.
Double sided tape 3M VHB 4910F (10x1 mm) works well.
The compartment has now been on my wheelchair for a few weeks and has proved very useful. The compartment does not interfere with the movement of the footrests and car transportation is also no problem. Can be used for the left and right…
Simply stick on the vacuum cleaner with hot glue or mounting tape. Provides space for additional nozzles (brushes, etc.). Can also be glued or screwed to the inner side wall of the broom cabinet. Print with PETG, PLA is not suitable for…
Glued to the bottom of the clipboard (hot glue). Dimensions fit for DIN A4 narrow side. Outer dimensions of the shell: 202 x 24 x 20 mm. Designed for Maul 23920. The recesses for the rivets are quite large, should fit other DIN-A4…
Especially for low viscosity adhesives. Safe standing of the tube, no more tipping over and leaking. If you like, you can additionally weigh down the stand with a stone.
Made of three parts, body, lid and screw. The lid is not twisted, the cable ties remain in the slots provided. There are three positions to fix the end of the filament around the circumference. The filament is simply pushed through a…
For a tube diameter of 22 mm and an angle of 14°. You will need two cylinder head screws M4 x 20 with nuts. Easy to print, no supports. PET-G or ASA is ideal, PLA is also possible (not for outdoor use).
So that the cold device plug does not lie on the floor and get dirty.
For tube diameter 22.4 mm 2 socket head cap screws M4 x 30 2 lock nuts M4 ASA Filament recommended. PET-G will work too.
These are only the 3D-printed parts for building a remote shutter or a timelapse unit for the LX3 digicam. Micro servo SG90 4 cylinder head screws M2.5 x 10 mm 1 knurled head screw M3 x 10 mm 1 nut M3 PLA will do. My timelapse controller…
German text below. The holder is glued to a side wall in the helmet compartment. In order for the gluing to work on the curved surface, it is attached to only three attachment points (three-legged tables do not wobble). The holder has…
If an M3 or M4 screw has not yet been tightened or has already been loosened, it can be turned easily. This is unnecessarily slow with the usual wrenches or wrenches with a T-handle. The sleeves have a hexagon on the inside and a non-slip…
Fits the Leitz 5038 hole punch (probably not the NeXXt version with the same number). For DIN A4 only. Remove the stop of the hole punch, place the hole punch in the recess of the plate, done. PLA, 5% infill for print bed size 250 x 210…
You no longer touch the wall with your fingers (no soiling). Screw or glue tight. To screw together: Two countersunk screws M3 x 14 (up to M3 x 30) For fastening: Two countersunk head spax screws with 3 to 4mm shank diameter. 8 mm of the…
The remote control has very sensitive capacitive buttons. You can hardly touch them without one of the motors starting up. Operation without looking is not possible as the buttons cannot be felt. This cover eliminates the above-mentioned…
Most drying racks have a tubular frame with bent tubes. The castors are attached as far out as possible at the bends, i.e. at the “corners” of the legs. This provides better stability. On the drying rack itself, only the feet clipped onto…
The sleeve is pushed over the hinge of the rack to prevent the rack from collapsing unintentionally. Unfortunately, the plastic sleeve was not UV-resistant in my case. The spare part consists of two parts so that the stand does not have…
There is a version with a flat mounting plate for screwing or gluing. This is intended for lighting the interior, trunk, or helmet compartment of vehicles (no photos). And there is a special version for 50 mm diameter tubes for gluing.…
The holders are glued on with hot glue, then drilled through the existing holes and the holder is secured with 3 mm PT screws (or other self-tapping screws). Remove any protruding screws on the inside with a Dremel and sand down. Magnet…
Screw a thread adapter from 1/4" to 3/8" into the printed plastic block. It is best to choose the version without a flange (it is more stable). The block is then glued to the underside of the light with 2K adhesive.
Clips onto one of the legs of the clothes drying rack. M4 x 30 Cylinder Head Screws
To wszystkie aktualnie dostępne wyniki.
