Liczymy pasujące modele…
I bought the board here , but there are many other stores that sell it. FreeCAD 1.0 design files are included in case you need to do some modifications. It is a really handy board, because it can be connected directly to 220V without the…
There are some similar models to this, but I couldn't find one that could fit the holder and also the blades in horizontal position without wasting too much space (this one only requires a single additional square). The blades could be…
A Gridfinity holder for small PCBs (nodemcu and similar). I designed it to be useful to store both bare and assembled PCBs, and for the boards to be able to be placed along both X and Y axes. Available grid sizes are: 2x1 2x2 3x1 3x2 The…
Blades could be a bit better organized, but I did not want to use more space, this uses a 4x2 grid.
I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.
Very simple wall mount for the E-11 Stormtrooper Blaster by Andrew Williams.
Instructions Printing Follow the instructions for the original model, but instead of printing the original PG_003_Hatch.stl file in the original repository, print the PG_003_Hatch_custom.stl file in this one. Make sure you also print…
This is a remix of the Adjustable PCB Holder Tool by @squinn, allowing it to be printed on common 22 cm print beds.
Guides for welding up to 5 x 21700 LiPo batteries together. FreeCAD file is included for easy remixing.
The original cable organizer by @squinn is awesome, but now that all your cables are properly organized, you need a solution to organize the cable organizers themselves! There are two different containers available. The first version is…
Gridfinity holder for the Xiaomi Electric Precision Screwdriver complete enclosure. 5x2 grid.
Gridfinity holder for the automatic wire strippers you can buy dirt cheap on sites like Aliexpress. Two versions are provided, a 3x5 one with stacking lips, and a thinner 2x5 version (on the photographs) without the stacking lips.
I tried recreating the misterious artifact appearing in the game, to match as best as possible the game logo when seen in wireframe mode. I think completely matching the logo is impossible, because it is an impossible figure (like the…
Here are several designs for the USB to UART boards I had lying around. They are pretty quick to print using 0.2 layer, and can be closed with a bit of glue. There are also convenient slots to see the PCB pinout silk screen. Category:…
This tablet/phone wall mount is inspired by this one: https://www.printables.com/model/400121-tablet-wall-mount But I remade it with wider spacing (2 cm) so a tablet with thick cover can be placed inside, and with chamfered holes. FreeCAD…
Gridfinity Bin that you can edit using FreeCAD
This model is inspired by this design for the Smart Band 8 Active , but since I couldn't get the charge connector for the Smart Band 9 Active to fit inside that design, I completely remade it. Printing The model can be printed without…
This model is for the classic 3-Button pad, with approx. 1.20 m long cable. The cable makes two turns and then the connector fits gracefully in the allocated slot.
This is a power strip bracket, to be used with the model on the photograph that has a power switch. The models can be printed without supports (see below), with the screw holes pointing up, as can be seen in one of the photographs. The…
This allows to dock the Steam Deck to a Baseus 6 in 1 PD USB-C hub.
Very simple and fast to print stand for R36S with the flex cover by diluno
The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.
Remix of the original model axle for tape rolls with 25 mm hole.
Two brackets to mount the Anker PowerExpand 8-in-1 USB-C PD Media Hub
I recommend 100% infill for the body_holder.stl model, since the gun + electronics + battery weights about 3 kg. Channel holder can be printed at 50% infill without a problem. EDIT: Modified body holder to be a bit wider and thicker,…
Must be inserted as shown in the photographs, with the rounded protrusion facing the top of. Flute pitch is slightly shifted, but this cannot be avoided as far as I know. I have printed it in ABS, with 0.1mm layer height and 100% infill.…
This is a remix from the original by fdivitto. The modifications are: The braces are longer in order to be able to attach an additional screw inside the case, and also the other black screw from the right of the CPC case (the original…
This Gridfinity holder is for the “Cat Printer” Bluetooth thermal printer you can find really cheap (usually less than 20 €) on Aliexpress and similar places. It can hold the printer itself, and up to 6 paper rolls. The model does not…
NOTE: I was asked in a comment to make a shorter version, I am not sure it will fit, but there it is in case someone finds it useful.
These brackets are for the ZY-AK3 KVM switch on this Aliexpress page . Can be printed without supports if you don't mind some “plastic wires” on the upper part of each bracket. Otherwise just use supports. FreeCAD design file is included.…
A Gridfinity holder for my good old Lindstrom 8140 precision wire cutter. 2x3 grid.
My good old NES was missing the cover for the gamepad connectors, so I designed this replacement. Please Nintendo, don't sue me! FreeCAD design file is included in case you need to modify anything.
There are already several screen protectors for the Ender 3 S1 Pro, but I wanted one suited for flexible TPU material, so made my own. FreeCAD file is included for easy remixing.
This is a piece I designed emulating the original part from Sennheiser HD-201 heaphones that broke. Just print 0.2mm layer without support with the small flat surface on the bed, and you're ready to go. Category: Audio
My wife bought this USB mini drill from Aliexpress , to use it on some handicrafts. The quality of the device is terrible, but it did the work… until it suddenly stopped working. The case was glued/welded so I had to break it to reach the…
A wall-mounted remote holder that should have enough space for most models. FreeCAD file is included for customization.
Stackable Gridfinity holder for the SEGA Megadrive / Genesis console cartridges. Uses a 3x2 grid with 4 height units.
There are several Gridfinity holders for the Dymo LetraTag, but all I saw are horizontal. This is ideal for maximizing space usage on tall drawers. The fit in the design is not perfect, but is quite decent, the Dymo printer stays firmly…
Instructions: Remove all remaining rubber from the keypad and clean it as much as possible, until it is like in the second photo. Print the body ( opel_keyfob_body.stl ) in soft TPU. You can use two colors to better highlight each key…
Gridfinity holder to stack electrical tape rolls. 2x2 grid.
Do not want dust to enter your precious Valve Index connectors between Beat Saber sessions? Just download and print these two caps, one for the female connector and one for the male connector. Both caps have the retention locks and fit…
A pad and covers for the Angled Laptop Stand / Extended Support by @BurgessG.
What's this? This is an electronic button design for quiz games. The idea is to build a host button and up to four player buttons and play as shown in the video: https://www.youtube.com/watch?v=L-j9yM4ZkZQ Buttons have an internal battery…
If you have a very long printer that can fit the 8x1 model, just print it. Otherwise, print the 4x1 half twice. No need to glue them since the gridfinity baseplate will put both ends together. It might also fit the DS-740, but I do not…
Gridfinity holder to stick in the 4 port Couso USB hub in vertical position. Uses a 1x1 grid.
This enclosure is for this model of the FT2322H development board . There are many more from other vendors, but make sure it is this exact model if you want to use this case, because there are different designs. The enclosure consists of…
This just allows to keep the Lenovo USB-C Powered Travel Hub and the 65W Lenovo USB-C power brick in a single enclosure. In addition to this, the added weight from the power brick makes the hub more stable. As a drawback, the design hides…
Gridfinity holder for SMD Component Magazines by robin7331.
Print the model, no supports needed. To store the mouse, place it inside the bin, then wrap the cable in the slot around the mouse (3 turns) and put the USB connector in its hole on top.
You can find these adapters in sites like Aliexpress. They allow playing SEGA Master System cartridge games on your SEGA Megadrive / Genesis console.
An anti-slip pad for the minimalistic R36S stand (with cover).
Use the files from the original model from Makoto_Doushite, but replace the top of the case with this one. To close the case, I used: Two M2.5 x 25 countersunk head screws. Two M2.5 x 10 countersunk head screws. You can optionally also…
A two piece bumper for this power bank. Must be printed in soft material, like TPU. FreeCAD design files are included.
A Gridfinity staple holder. This is for staple model "El Casco"
A 2x4 Gridfinity holder for the Lenovo Powered USB-C Travel Hub, with stacking lips to place more blocks on top of it.
I use this for a Samsung F24T350FHN monitor and it works perfect. The original anti-slip pad that came with the monitor is just flat, but since monitor stand has holes where these pads are mounted, I added the center tower. The tower is…
This is the case design for my ROMBA cartridges for Amstrad CPC computers. For more information, visit the project GitLab page: https://gitlab.com/doragasu/romba Category: Electronics
Enclosure for the programmer of my MegaWiFi cartridges for the SEGA Genesis/MegaDrive. For more information about the proyect, visit the GitLab page: https://gitlab.com/doragasu/mw Category: Electronics
This is the enclosure design for my ROMBA cartridge programmer. For more inforfation visit the project GitLab page: https://gitlab.com/doragasu/romba Category: Electronics
This is an anti-slip pad that must be glued to the base of the remixed "Steam Deck Dock for Baseus 6 in 1 Hub".
Cart enclosure for my MOJO-NES MK3 cart programmer. It has been designed to resemble a bit the original NES design. You can find more about the project in the GitLab repository: https://gitlab.com/doragasu/mojo-nes-mk3/ Category:…
This is a stackable Gridfinity Holder for my design of FT2232H programmer enclosure. 2x3 grid.
The Gridfinity holder allows storing both the remote and the 2.4 GHz (non Bluetooth) USB dongle that comes with it. It has a place for an additional dongle in case you need it. At the moment of writing this, the specific remote this is…
Introduction This is an enclosure for the MegaWiFi Programmer V , a cart programmer and dumper supporting original carts for SEGA Megadrive/Genesis and Master System and also flash based carts such as: MegaWiFi Flatmap64 FrugalMapper…
A simple support for a Window Vacuum Cleaner. FreeCAD file is include for easy remixing.
Gridfinity holder for the miniVNA Tiny and the calibration kit (open, short, 50 ohm load). Uses a 2x2x5 grid.
Uses 3x4x7 grid size. Can hold the charger and the user manual.
Introduction This is an enclosure for the SEGA8 Programmer , a cart programmer and dumper supporting original carts for SEGA Master System and Game Gear consoles, and also flash based carts such as: FrugalMapper FrugalMapper Compact The…
A 1x3x3 stackable Gridfinity holder for the remote of the Elikliv EM4K-AF microscope.
The original Aoyue WQ tips are shorter and nicer, but T12 tips are way cheaper and easier to source, so I have for a long time wanted to do this mod to be able to use them. WARNING : The thermocouple in T12 tips is different, so you have…
Enclosure for the XiROM Programmer. Currently there are two designs, a "standard" version and a "short" version. Print whatever you like more. The top part of the enclosure has been dimensioned for PAL and Japanese cartridges. I want to…
To wszystkie aktualnie dostępne wyniki.
