Liczymy pasujące modele…
This is my humble contribution to the rebranding of PrusaPrinters.org to Printables.com. Thank you Prusa for this amazing community. For 0.2 layer high change filament at 2.2mm and 3.2mm or use the built in function to apply color change…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
A simple 2 parts snap-fit case for Raspberry Pi Pico. No screws needed. Back of case is open for wires. I use it to connect 2 ADXL345 and do the input shaper in Klipper Print settings: layer: 0.16 or lower perimeters: 3 To connect 2 ADXLs…
I made a remix of this . I add the bottom protection in order prevent the screw to damage the PCB on the back of the bed and made some wall thicker to reduce the flex. Print the 2 parts and assembly using an M3 nut and max 10mm screw to…
Finding a filament clip should be easy for such a small piece of plastic. But after almost 2 years of 3D printing I didn't find the best one so I made The Perfect one :). My requests was: no side mount of the spool - will eventually break…
After I convert my printer to direct drive my extruder cables were touching the Z rods. I don't like cable chains so I need a solution for cable management. The guide has a 90 degrees angle in order to better route the wires and it is…
Bed reinforcement brackets for the Ender 5 and Ender 5 Pro in order to reduce vibrations and make the bed more stable. Advantages over other models: stronger if print correctly (see below) less material - less weight no Z losing PRINTING…
Updates: 16.11.2022 - add the X version for my linear rails. Test it with my custom mount but should work with an other models. PRINT SETTINGS 3-4 perimeters, 25%+ infill, a 10-15mm brim will help, outer part and knob could be from PLA…
Printables.com deserves its own test cube. Check your dimensional accuracy, bridges ghosting and overhangs. The cube should be 30mm^3. Inspirited by the Voron Cube .
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
All you need is a M4/M5 nut, I recommend nyloc type in order to prevent unscrew due to vibrations. Print settings: layer: 0.16mm or lower perimeter: 3 infill: 15% - 20%
After you convert to Direct Drive you probably need a new spool holder. So I made a dual spools holder for Ender 3 family (Ender 3, Ender 3 Pro, Ender 3 V2) or any 2020, 2040 profile like Prusa Bear. I modeled the holder myself and I…
The best way to test the transparency is with a 35mm slide. You can look at it in the light or you could even use it in your old slides projector. Generated for the most common materials, I'll try to keep updated. I take the list from…
A printed cap protection for Rotring 500 & 600 mechanical pencil. I like the original model but want to mimic the pattern from pencil. Thank to original poster for sharing the fusion file, post it back with my changes. Tested on 500 & 600…
Boxes are the best way to organizer swatches because it's easy to take out 2-3 or more in order to see how colors looks together. On wires or bolts will be complicate to take out one from the middle. A year ago a choose the filament…
This is a remix of a remix . I rised the foot at about 48mm high (45mm the foot + 3mm the base) in order to have space for more cooling case for MCU and PSU. You can scale the foot only on Z in slicer based on your needs. Print…
For the new refills with holes in cardboard. My master spool is compatible with AMS Lite, if someone tests it with AMS I'm waiting for feedback.
I use this handrest but missed a soft top part and a other one for more friction on bottom and TPU is the perfect candidate for both. I also reshape the dust cover in order to be more TPU print friendly. Printing Info for TPU In order to…
I followed the Nero3D guide for input shaper with pico but I connected 2 ADXL345 for my bed slinger style printer. The original case doesn't have enough space for all cables. You could also take a look at my other pico case without screws…
I print and love the JWST Drink Coaster but there is no holder. So I made a few ones that can hold 12, 10 or 6 coasters but you could probably scale it on Z to fit your needs.
I love the Fiberlogy new spool and I use a lot of their refills. But I don't think the inner cardboard part will hold up to wear after repeated use. To prevent any accidents in the future I have designed a replacement to avoid wear and…
Z brace for KevinAkaSam Belt Driven Ender 3/Pro/V2 and CR10 in 2 motors configuration on normal profile. It will also work with any stock Ender 3 style printer. BOM for dual Z on belts mod M5x16mm x 14 pcs M5 T-nuts x 6 pcs 2x M10 acorn…
BENEFITS printer is more stable and less vibrations bigger z stepper motor or lower the motor to gain 20+mm more space for a bigger psu/mcu fan could be used with or without TPU parts PARTS PLA/PETG 3-4 perimeters, 20-30 infill. The…
Print on side with your preferred settings and use double tape.
To wszystkie aktualnie dostępne wyniki.
