Liczymy pasujące modele…
This is a cool model of the Google dinosaur, this is the not flexi version check my profile for the other version. Other versions: https://www.printables.com/model/762108-valentinosaurus-rex-google-edition…
This is a scale model pallet jack, it is based on the toyota BT levio electric pallet truck. Parts list: 1,75 mm filament screw: M3 X 6 super glue If some of the holes don't fit the 1,75 mm filament you should drill them out with a power…
Chair from skilift based on a doppelmayr 2 seater (on request from someone) This is a nice decorative piece if you are a skilift lover, if you have a working model skilift then you should be able to fit it on there by putting 2 grub…
This airsoft/BB gun mag emptier is disigned to empty your mag super easy when you need to! (Its mainly for pistols/handguns) Print settings: Nozzle: 0,4mm Layerheight: Different sizes available to suit your needs! Don't hesitate to…
I changed the depth op the bridge electronics to 27mm deep to fit the new model. I am testing this remix at the moment so there is no guarantee that it will work 100%, I will also examine the part over time for bendage (material creep)…
This is a nice decorative piece if you are a skilift lover, if you have a working model skilift then you should be able to fit it on there by putting 2 grub screws (M2 x 5mm) in the the 2 holes prepared for it, if you want you can put an…
I made a mounting plate for an aftermarket ESC, that will only work with the traxxas lcg chasis. Parts list: screws: M3 X 8mm the plate itself an aftermarket ESC double sided tape If you want you can add a zip tie aswell to make it even…
This bracket can be used to make a wooden worktop for your M-BOXX Hardware: Screws: M3,5 x 40mm OSB panel
This sign can be a great adition to your room/man cave. you can choose between three different mounting ways: screws magnets flat option (without holes or anything) i suggest you use the color change option in prusa slicer: Black (or some…
This is a holder for your rols of paper towel, it is designed to swap the roll with ease. It is modular because you can make ‘part one’ the lenght of a regular toilet paper rol and than you can use it for that. Parts: Screws, you can pick…
This sign you can hang on a door to show people it is occupied. Just Print it with the default 0,20mm presets, do a colour change to make the letters pop. my advice a darker colour to a lighter colour. Happy printing.
This model can be used to cut your cookies into christmas trees, to have an even more magical christmas eve! Hi there, I found that it was printed best at: nozzle: 0,4mm height: 0,05mm ULTRADETAIL (because it will make the chamfer help…
This is a clip made for cable management on the traxxas LCG chasis, It is for if you deside to buy some aftermarket stuff. (to keep It all nice and tidy) Parts list: M3 x 8MM PRINTED PART Happy printing, and driving!
This is a really realistic example of a piston, scale as you wish! I strongly suggest you slice the models as shown on the pictures! printer settings: Nozzle: 0,4mm Layer height: 0,10 detail => for all parts Partslist : super glue M4…
This is a scale model pallet jack, it is based on the toyota BT levio electric pallet truck. I made an upgrade for it! Parts list: 1,75 mm filament super glue If some of the holes don't fit the 1,75 mm filament you sould drill them out…
This is a cool piece of decoration for any room! Print settings: Nozzle: 0.4 or smaller Layer height: 0.15 quality (I strongly recommend you ironing the top for a better print results in the end.)
This model can be a great adition to you miniature christmas village. (scale up or down as you like) I used it for my christmas setup and looks amazing, I found it was printed best at: Nozzle: 0,4mm height: 0,05 ultradetail support is…
This workstation can help you keep you printing space organized! It holds max: 1 caliper, 1 superlube syringe, 1 nozzle brush, 1 spatula (UP TO 80mm, can make it larger on request), 4 pliers and last but not least a small compartment for…
This sign can be used on you model skilift as an accessoiry to make it al look nicer! happy printing, make sure to post a make when you print my model, it would make my day. If you have any ideas on how to make the letters pop more, leave…
This model was designed to create an offset between a wall and a decorative piece. when you chose to use the offset you can place LED strips behind the decorative piece for some cool effects like I did with a monster enery look alike logo…
This sign can be used for fun, or in a very serious workplace. You can use double sided tape to mount it to a frame/wall,… This is a multi colour print, I suggest you used the provided G-codes for the correct time and colour swap. (Colour…
This is a M1A1 Thompson smg stand, it basically holds the gun (for display) This stand was design by me not the gun that was this guy: https://www.printables.com/@Sushirollz18_260034/models If you have any questions, happy to help! Happy…
This is a battery holder that can be used to mount your hikoki batteries to a wall or wooden panel. There are two holes provided to mount it to something. You will need some screws and a bit of super glue to glue everything together as…
This is a Landrover defender, Its modeld after the real thing (the D110), if you have any questions about the model, do not hesitate to contact me! I used glue and paint to make it look better, but to be honest i am not a really good…
This Traxxas hoss aftermarket ESC mount enables you to mount nearly any ESC on you HOSS You will need hardware, double sided tape (for the esc, or hot glue) and a zip tie. To hold the bracket in place you will need 2 countersunk M3 X 6mm…
I printed and designed this model because I lost the original one. It fits the lamp perfect! Instructions: print in PETG or PLA (you can try to print it in TPU/FLEX I haven't tested it) layer height = 0,2mm nozzle = 0,4mm Happy printing!!
The Pro racing epoxy spatula, makes mixing epoxy an easy task! print at ULTRA DETAIL 0,05mm and 15% infill happy printing!
This is the small version of my previous upload, the same here, if you have any questions than contact me.
This sign can be used to show people how much weight something can hold before it brakes or cracks,... You wil need 4 M3 X 16mm screws to bolt it on to something.
This Universal Fuel Cap can be used in a variaty of applications. Allthough I don't recommend exposing it dirrectly to fuel or gasoline. Print settings: layer height: 0.20mm quality nozzle: 0.4mm filament: I printed it with pla, I would…
This is a sign that contains an inside joke and can be used as a gift to your french friends who just moved into there new home as a welcome gift.
This IPA and ACETONE holder is desined to give you easy acces to your 3D printing cleaning suplies. It is easely mounted to a piece of furniture with two screws. IPA bottle max diameter: 55mm ACETONE bottle max diameter: 50mm
To wszystkie aktualnie dostępne wyniki.
