443 modeli
This is a Z axis camera mount for the KP3S 3.0. This uses the low cost HBV-W202012HD camera module. Printer: KP3S 3.0 Filament: PLA Infill: 15% hexagonal Nozzle: 0.4mm Layer Height: 0.2mm Supports: organic, only touching build plate…
Part for replacement of a broken pin of trunk cover
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
Mit diesem Adapter kann ein Saugschauch mit D50 Muffe (z.B. Festool) mit dem Absaugstutzen des Makita Dickenhobels verbunden werden. With this adapter, a suction hose D50 sleeve (e.g. Festool) can be connected to the suction nozzle of the…
This model is a simple and elegant wall-mounted holder designed to keep your coasters neatly stored and within reach. It features four small holes for nail mounting, but my preferred method is using painter’s tape on both the wall and the…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A pencil/pen vase with crisscrossing wavy ribs to keep your favorite pens and pencils in. It is 109mm tall and 81mm for the x and y axis. The photo shows the vase printed in regular mode with 2 walls and 3 bottom layers. The stl file is…
⚫SKARO DALEK⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every Saturday! And…
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Maqueta del Ferrari F2012 que pilotó Fernando Alonso en el año 2012
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Continuing with my previous laptop stand that folds…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED April 20 2023] Other variants are published…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
Kärcher filter nut 4.075-012.0 I list mine so requested some specs from fellow owner and made a relacement. This one fits the cartridge filter on these models of Kärcher vacuum cleaners: A 2003 A 2004 A 2024 pt A 2054 Me A 2101 A 2201 A…
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
This is a reupload and thought it'd be awesome to have this on Printables. Since the existing cupholders doesn't fit anything in this world, I decided to make one that fits normal 33ml cans. The small square hole in the middle is for…
This is a suction hose hand grip (like 2.863-012.0) for my Karcher WD6 Premium vacuum cleaner. There are three versions attached. Because of the height for some printers it's shortened for the Ender3 and Prusa i3. It's meant to be printed…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE April 18 2024]: 5x “b” Versions added, where…
TL;DR Just a CAD exercise found on reddit and made it with freecad. reddit https://www.reddit.com/r/SolidWorks/comments/10m2ugj/how_can_i_become_faster_drawing_things_like_this/?sort=new exercise Use only the screenshot and try to sketch…
F1 Red Bull Racing RB8 2012 Wall Art Silhouette model. Adjustable size. I acept model suggestions.
Ball joint split into two parts, hold together with screws. Like this the ball can easily be inserted to the joint and the grip / friction can be fine tuned. Slides on the original metal part which is glued to the glas and interfaces the…
Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** These hard cases: Fit the Pinecil Smart Mini Portable…
It just slides along the top of an iMac ;) I made mine for the 2017 27" 5k iMac with the “Thin Unibody” design, but it should work with really any 2012-2020 model iMac with the same basic body. All the little print does is sit in front of…
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
My Judge Dredd 2012 Inspired Helmet Untested. Category: 3D Printing
3D Ford Fiesta Model Keychain Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Lower Print Until Undercarriage Touches PrintBed (optional) Print Settings Printer Brand: Creality Printer:…
There's no cabin air filter on these trucks. There's just a big hole. This adaptor installs over the hole to allow you to install the included paper air filter. It includes the adaptor, one replaceable paper filter, and the bolt/nut/wedge…
Remote control holder for Samsung BN59-01289A or similar. Open-bottom model for dirty environments.
Well my father used to have a 5D Hundai I30 II 2012 as a daily ride. It was a great car but after few years it started to reguraliy loose those roof rack covers. Those were preety cheep but also annoying as you would have to glue them in…
To download the box of my idea and project for the laboratory power supply riden rd6012, the box fits a dedicated 800W power supply NVVV, the top of the housing is folded out for quick access to the power supply. Box in two options,…
This is a protecting case/cover for the Samsung "Frame" TV remote control called BN59-01290A (check inside the battery cover for your model). It is printed in TPU on stock Creality Ender 3 with support. The back of the case is a bit too…
This is a Remix of Termiman's soldering iron case. This one has been designed to hold the Sequre SI012 Pro Soldering Iron and two additional tips. * DOES NOT FIT THE LONGER TS SERIES TIPS, ONLY FITS THE T12 SERIES TIPS * No supports…
I made this file to make Rally vents for my 2013 Ford Focus ST for track days. When I printed the files I cut it in to thirds and acetone welded them.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Object description: Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades. The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger…
This model is compatible with the lego system.
5 периметров, от 20% заполнения, печать как указано на фото и с поддержками древовидными. можно печатать с технологией нечеткой оболочки. //// 5 perimeters, from 20% filling, printing as indicated in the photo and with tree-like supports.
additional parts 1) o-rings Next to the printed piece itself two rubber o-rings with the following specs are needed: outer diameter = 26mm inner diameter = 20mm thickness = 3mm The get inserted into the printed grooves and act as a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This case is to protect the key fob from scratches by…
Add it to your creactions.
Not the most gentle enviroment for a 3d print, so I needed to think about sun exposure, rain, roadsalt, g-forces, stone chips, etc in the design and filament, but the outside needed to look perfectly like the others, as you'd see two of…
This is used in the event you are installing some accessory that is being hardwired to the cars interior fuse box. This is a remix of the following link:…
Redirects the air straight up instead of out. The longer model is for the three center sections, the shorter model goes on the ends. There's a slight gap at the very ends because the outer edges aren't perfectly vertical. Though they…
Civic FB 2012 Hood Rod Clip Print Settings Printer Brand: Bambu lab Printer: P1P Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: No raft or supports required Category: Automotive
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These simple plugs are inserted into your chassis to keep dirt/water etc out. In a new car they should be inserted as part of the pre-delivery-inspection. They are bi-directional depending on your model of car or preference for…
Here is a replacement part for any microwave that has a standard Ø 180 mm 5889W1A012A turntable. It's commonly used in budget devices. All you'll need is a T10-T20 torx screwdriver for the assembly. Tip : print the sample test first to…
This model is compatible with the lego system.
I replaced the double-DIN touchscreen stereo in our 2012 Subaru Impreza Sport Limited with an aftermarket SONY XAV-AX100 (which I really don't recommend) and could not find an appropriate trim piece specifically for the Sport Limited. The…
Riden power supply RD60xx panel case to keep your panel on your desk and hide the actual supply under your desk. Print best using PETG as PLA might get soft when it heats up. It's best to print it facing front of the panel (open wall)…
Unášeč - Spojka pre kuchynský robot ETA 0010. ETA blender carrier
This is a Volkswagen Golf plus model I converted from SketchFab using 3d builder to be 3d printable model. I hope you enjoy printing this model. Link to model:…
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
Designed to fit the cupholder closest to the arm rest in a 2012 Ford Explorer and holds a slim 12oz can. My wife said, “it's good,” which is the equivalent to a prestigious design award. May fit other model years or vehicles, see image…
Low poly Butterfree, the final evolution of Caterpie. A beautiful Bug/Flying Pokémon in geometric style.
Fan model: Delta BFB1012SHA01 Screws: M2x6 11 pcs. M3x16 3 pcs. I also added a model in STEP format.
Dimensions 3 inch (76.2mm) 4 inch (101.6mm) Printed at 0.2mm layer height on my BambuLab P1P using PolyTerra Savannah Yellow Matte PLA PolyTerra Charcoal Black Matte PLA Bambu Textured PEO build plate This Electrical Shock / Electrocution…
Update 4-17-26: added 115 variant Update 10-24-24: added 016 variant Printable O-rings that are sized at 012 and 123. This was made specifically for the LHTCU. This will drastically reduce performance compared to real O-rings. Use a…
This model is compatible with the lego system.
Zwei verschiedene Messuhrhalter für eine Multifixaufnahme B. Für Längs und Plan Messung. Maße siehe Zeichnungen. Montage über Gewindeinserts M5 (M6) - dazu Mutter M4 und Halteschraube M6 Two different dial gauge holders for a multifix…
I haven't been able to find the factory cupholder insert at a junkyard, so I took a stab at designing my own. Fits a large Nalgene and a normal sized cup.
Fiat 500 shifter cable bushing. There is a recall for those, but it's helpful to have a quick replacement in case of temporary situation.
Snug fit. Better use PETG, because bearing may become hot, when alot of breaking.
I made this model to align my cheap USB cameras for stereo imaging. It's press fit for the PCB, and enough space to add some glue to fix the cables. Distance of the cameras is 35mm. I'll add a cover plate later maybe with a strain relief.…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
RIDEN® RD6012W USB WiFi DC-DC EPP-500-48 MEAN WELL - https://www.tme.eu/sk/details/epp-500-48/otvorene-zdroje/mean-well/ 4304.4023 SCHURTER - https://www.tme.eu/sk/details/4304.4023/konektory-iec-60320/schurter/ CP30090 CLIFF (only power…
replacement e-brake button for a 2012 Civic SI I recommend you print this in PETG so that it will not warp if the car gets hot. I found that the button is possibly a little loose, but it worked well enough that I have not modified it…
This is a replacement knob for volume and channel. It might also work on Armada.
3D scans from Grenadier Subterranean Terrors set. The Vi-Perdon has some damage that looks like I must have shot it with a BB gun when I was a kid. Kids are dumb. I do not own rights to these models. If a rights holder exists and wants…
I didn't like the heavy thick options which are used for mounting to walls and shelves, just needed this simple cover. **Printed laying flat so there is a lot of waste in support material. I tried printing on the side but had problems…
This was designed quite a while ago for a 1st generation Toyota Auris 3door hatchback. Adapter for the back might also fit the 5door hatchback version... i would assume so. Because this is automotive use i would reccomend atleast PETG…
iPad holder that can turn your old iPad 2012 into photo frame. Contains a hole for camera to so that the iPad can auto-adjust brightness as well as cutout for charging cable. The cable connector needs to be t-shaped.
door plug for subaru forester, i made it for forester of 2013 year.
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
This is a remix of the original AirManager V2 Changes: Delta BFB1012M fan which is widely available https://octopart.com/search?q=BFB1012M Philips air filter (4mm shorter, cheap clones available):…
This is a Remix of tweetfpv's soldering iron case, I extended it 10mm so it should fit the TS tips
Iconic Movie Props - The Hunger Games - Mockingjay Pin - 2012
Lego rotor spare part 99012. For nicest quality print in standing position. Printed with 0.4 mm nozzle. 0.1 mm layer height, or variable LH overhangs 0.1, rest 0.15-0.2mm Lower part with 0.3 mm extrusion width.
Recommended to print standing on it's side longways with a substantial brim.
40mm front dash tweeter bracket for GP/GJ Impreza, XV, Crosstrek (2012-16), to adapt the factory tweeters to a 40mm round aftermarket tweeter. Probably also fits VM Levorg (2014–20) and VA WRX (2015–18) as the Subarus from that era used…
This is a remix of an awesome design by @benproductions on thingiverse. All I did was edit the seat post adapter in order for it to be able to fit my 2012 Cervelo P2. I will attach the onshape files I used to create the seat post below so…
The Ironclad Sentinel: Unleash the Power of Advanced Robotics for Your 3D Prints! By KRIT YAMSASO (YAMSASO DESIGNS) Step into the future of 3D printing with The Ironclad Sentinel, a formidable robot design meticulously crafted by KRIT…
About I bought this cheap little camera figuring I could either make a box and mount for it, or someone else would have one ready. I didn't see any options I liked that were pre-made, so I came up with this. Uses standard action camera…
Hello! I wanted to make a tablet mount for a Ford F-150 (2012) and found Ryan000's model for a Fire Tablet 10". I had a smaller tablet available so I made a remix to fit my tablet. Hope it helps anyone looking for a slightly smaller…
The .stl files are the whole model and half, which you can also print as a mirror image and assemble the whole enclosure. If you would like to redesign something according to yourself, I have added the .step files.
You have to cut the hole for the power supply yourself in the desired place. The .stl files are the whole model and half, which you can also print as a mirror image and assemble the whole enclosure. If you would like to redesign something…
Design Concept The design leverages a minimalist floral theme inspired by nature, creating an elegant and lightweight accessory that's easy to wear. Purpose These earrings are ideal for everyday wear or can be used as a subtle design…
This is a 3D printable version of the MHS012 mounting bracket used commonly on Mean Well power supplies. I tested the print with PLA and tree (organic) supports for the upper portion of the part (see photos).
This allows you to mount a MagSafe compatible iPhone in the 5th generation (2012-2018) Nissan Altima for use as a secondary screen. Works great with maps as well as the new StandBy feature in iOS 17. Fits in solidly to the lower storage…
PLAYMOBIL® Baby Figur 30121160
![Doctor Who - Post Time War Dalek [2012] ★SKARO DALEK★](https://media.printables.com/media/prints/75799/images/7871489_a41a8051-5d2e-4fd8-99e1-5c8b16749666_987f6701-daaf-43a1-8701-4326e696a9f1/gg1.png)
![#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added]](https://media.printables.com/media/prints/786225/images/6325215_44438b46-20a6-4396-bdae-72593db3e3a6_7d72e422-ffa4-4ae1-85e0-a7646e047e42/rl-20240317-023.jpg)
![#0120 Pinecil V1/V2(BB2) Hard Case for Smart Mini Portable Soldering Iron [4x Long and Short Solder Tips]](https://media.printables.com/media/prints/707372/images/5799893_63b32ed3-1fd9-4f9b-8fb9-50cff4bf3655_ddbabf90-1a1a-4db2-8426-259fbbb81d1a/20240128_195410.jpg)
![KRIT YAMSASO [20250928012]](https://media.printables.com/media/prints/f329c1ab-a9a1-419d-8d38-d870e9d8f25f/images/10834670_f0201601-7eea-41da-86fd-578a62beb553_a625444e-8c1a-41ae-b240-6965c3e771ca/012.png)
