Liczymy pasujące modele…
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Adapter für die integrierte Navi-Halterung (VW Teilenummer 150 035 936 A) des VW Up! 1.0 Passend z.B. für Brodit 711083 Passiv Holder mit Drehfuß für Apple iPhone Befestigung auf dem 3D-Druck Teil: mittels selbstschneidender Schrauben Je…
First thing, many thanks to testudor for the original kit, this mod is a life saver. To be clear first, you can mount any 92 mm fan to the original frame, as long you can make it work. But the frame of the be quiet fans were in the way of…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…
This is a Pegboard mount for a Netgear GS108T switch. It has a 75mm spacing between the mounting holes and uses a standard 1"X1"X1/4" U.S. peg Board. Pictures are from version 1. Version 2 has the holes to reduce some of the plastic.…
While you can do this with a split and connectors in Prusa slicer the dowels are never exactly in the centre. As well I found 6mm airsoft balls a bit too large. these are 5.8. They work a lot better for the print of the models ( ). To…
Playmobil kompatible Jukebox Wurlitzer 1080
Print: For a multi-color print (as in the example photo), three layers are needed for the “Cover”. The heights of the layers are: 1mm, 2mm, and 1mm. Assembly: The slit for inserting the cover into the main part is exactly as wide as the…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…
Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.
This is a 10" rack mount for a Netgear ProSafe GS108Ev3 network switch. This model assumes you have the 4 round stock rubber feet under the switch. Printed in PLA with a 0.4mm nozzle using 0.2mm SPEED preset with adaptive cubic infill.…
Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Updated Feb 11, 2024: I added a version that has a small hole at the top of the…
Here is a twisted, grooved lamp shade design with spiral patterns to allow soft light on a table. There are no wires to cut, splice or solder together to make a light base. It is designed to fit on a 4 inch/10cm led display base. The…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
I have a few loose 4mm hex bits. These fit loosely in the 1/4" hex bit holes. I designed a small spacer to fill the gap and make it look nicer. Now I have a nice holder to store all my spare bits. Here is my Hex Bit Holder on…
just removed the front logo because I could not get it to print cleanly.
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
A bracket to mount the TP-Link TP-SG108 switch under a table or desk. Use 4 x #8 wood screws. Switch is held into place using bumps on the bracket that fit into the existing switch mounting slots.
This post/print only contains the bottom! If you want the rest please refer to TheSameNameTwice, the rest of the files for the box are there. I did not want to steal any downloads.…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
10" rack mount for Netgear ProSAFE Gigabit switch GS108 (maybe others). It has one kestone slot on each side of the switch. Designed to fit my 10" 2020 rack. When inserthing the switch the sides will need to flex out a bit in the rear,…
Eufy Camera wall Bracket for Indoor Cam Pan & Tilt 2k and 1080p Simple bracket to attach your Pan and Tilt camera to a wall. Bracket works by fixing the mounting plate that comes with the eufy camera to the bracket using the two m3 6mm…
Brackets for mounting a Netgear GS108 switch to the Multiboard mounting system. You will need to print 4xHandsOnKatie_Standard-Underware-Connector from the original remix file library.
A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…
Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…
There are other suitable designs for TP-Link SG108, but I didn't like them; I designed one in which you can easily slide the switch inside the rackmount. The hooks in the middle tightly fit with the body of the device, and it keeps it in…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a simple print that allows you to hang your Dewalt DCB-1108 charger to your Multiboard. Declutter your work environment and…
rotated the honeycomb pattern to make it easier to print
Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…
Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.
When I upgraded my TRX-4 ESC to a Hobbywing 1080, I found several mounting plates, but none had an external lever switch like I had been using with the original Traxxas ESC. I've combined Puredeath's excellent TRX switch(…
10" Rack Mount Solution (1U) for a TP-Link TL-SG108PE Switch. You can use double-sided tape to secure the power brick in place and zip ties to manage the power cord. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x…
Über den Parameter “Spalt” kann der Freiraum für den Switch verändert werden. In der ersten Veröffentlichten Version stand er auf 0,2 mm, jetzt ist er 0,5 mm und liefert etwas mehr Freiraum.
Have a look at the texturized 3D model here: https://skfb.ly/oOYWK 3D scan of a model of a cacao pod. The model was created around 1803 most likely by Franz Stoll or Johann Jaich, who were employed at the Naturalien-Cabinet, the…
Holder made for TP-Link LiteWave LS108G to be mounted in standard 10" rack. Switch can be mounted with screws thru standard wall mount holes but does not need to. Fits pretty tightly. Printed facing down and at 45° because of small bed.…
This minimal mounting for the Inno-Maker 1080P camera is excellent and gives a great view to monitor your printer, I designed it for my Voron but it will work on any 3d printer really, as long as you have a Raspberry Pi with a free USB…
This is a remix of the design https://www.thingiverse.com/thing:1322695 . For a smoother fit I made it 1mm bigger in the inside and added a honeycomb pattern to it. The switch can be mounted under a table, on the wall or wherever you can…
This is a remix of 3Drony v2.1 . The main difference is that this model is designed to fit: a Runcam split 3 lite , although it should also fit a Runcam split 3 Nano Whoop . a TBS Unify pro32 nano optinal: a Lumenier AXII 2 u.fl RHCP…
A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the design from @BrianBerkley. Printed face down, 2 versions are available to be used with/without M3 metallic threaded inserts. 2 screws M3x10 are required…
This is a remix of the design https://www.thingiverse.com/thing:1322695 . I seperated the model and added some support, so you can print it also on smaller printers and you are more flexible to mount. You have to mirror the parts in your…
This model prints in 4 parts for easier painting. Use super glue to hold all parts together. I added some small screws I had lying around for aesthetic purposes.
For my simple Homelab, I needed a Rackmount for my old DGS-108 Switch (12 Ports, 1 Gbps). The print in in two parts : The support and the “ears” I used some super glue to fix them together. (Yeah, I used too much glue so I have white…
This is a fitted 10" rackmount for the Mercusys MS108GP POE switch. The Mercusys MS108GP POE switch is an affordable switch for basic POE functionality, for instance Raspberry Pi's, Home Assistant boxes and smart home boxes. It also fits…
This is a remix of https://www.thingiverse.com/thing:3089825 with the following improvement: improve lan clip accessibility by changing the switch mount position reduce the mount width from 12 to 10mm slightly adjusted dimensions for a…
This is a rack mount kit for the Netgear GS108 switch designed for a 10-inch rack. The kit comprises three parts that can be 3D printed without the need of support. The clamps must be secured to the main part using two small screws. I…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
Designed this to mount the TP-Link TL-SG108-M2 in a 10-inch rack. The switch doesn’t fit through the front opening but fits inside, so I made this custom shelf to hold it securely. Printed with - PETG If this print helped you out,…
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
Printed in a single part on a big printer, or in two parts to fit the build area on a Prusa MK3. Attach the spikes with screws into the orignal wheels to improve the climbing performance on grass with the mower. You need to do some…
Mount/case for D-Link DGS-108GL to put into a 10" rack
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I had some fun do design this one. This might be the reason why it looks a little “fussy” :) I love the voronoi style, not just because of the optics but also to save material at printing. Donations are welcome and helping to keep my work…
Nice and compact mount for the awesome HobbyWing WP 1080 ESC and power button to fix it in the Traxxas TRX-4. Will fit both the full version (with shift servo) and Sport models. Designed to reuse the screws and holes that hold the…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Landing gear leg for 1/72 scale model kit of Messerschmitt Bf 108 Taifun. I made this for a shortrun kit by Fly (also reboxed by AZ Model). It is not very true to the real thing, but still looks so much better than the kit parts. Print…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
Switch Mercusys MS108G for 10 inch rack
This is part of a set of beginner friendly 3D printable ribs I created for myself. The edges are soft as to not tear the wall. Friendly for even potters just finishing their first 6-week class without the most centered wall. The duller…
2025/06/26 v2 uploaded - sorry for the trouble, I was uploading the correct 3MF and F3D but the former export of my STL / STEP files I was looking for a rugged box for the Canon Selphy CP1500 and now made my own to fit the printer and…
There are different kind of Dia Magazine Slide Feeders out there. Unfortunately, not all magazines use the same pitch. Universalmagazin DIN 108 (Reflecta, Hama, Leica) uses 5.5mm pitch Paximatmagazin (Braun, Revue) uses 5.04mm pitch There…
3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is the Pendrive Case by Bramesh501, but way smaller. Most normal USB Flashdrives still fit in. I put the USB stick that comes with the Ultimaker 3 inside and it fits perfectly. I Suggest you check if the USB you want to put in fits.…
Fully free model I made for the Mercusys MS108G switch. Has a cutout on the side for the power cable, but can be removed with FreeCAD quite easily. Now here's the special part. The file named “*with cut” has 2 dovetail connections on both…
This is basic lens cap for the Optoma GT1080HDR (Regulatory No: DAEHHGNST) DLP Projector. The projector doesn't come with one and could really use one because the short-throw lens sticks out past the front of the projector. It has a…
Quick ~40 minute print to get yourself a nice Hobbywing 1080 ESC and switch mount. Will fit Sport and Sport Kits models - without a 2-speed servo installed. Pictured installed on a Sport Kit.
A 3D printable shroud for the MSI GTX 1080 Aero 8G OC gpu. The shroud can be mounted in the same mounting points as the original shroud. The dimensions are also nearly the same as the original. For me, the best quality was achieved by…
A simple bracket for the D-Link DGS-108 . Just print the model two times for a secure mount, or just once if you plan to rest the switch on the bottom bracket. Use small 3mm wood screws.
Hardware: 6x M2x6 countersunk screw (ISO 10642, DIN 7991) 8x M4x20 countersunk screw (ISO 10642, DIN 7991) 8x M4 nut (DIN 934) 3x Noctua NF-A9x14 PWM fan (or equivalent) Print instructions: Use a material that's capable of dealing with…
Scale model of an Amiga 1081 / 1084 monitor. 1/8, but you can obviously rescale it. This is an accurate model of a 1081, based on real measurements. 1084s only differ visually in the connections and buttons on the back. I plan on making a…
I wanted to mount my TL-SG108 Desktop switch under my desk to use the space better but the mounting channels are meant for walls. i designed these brackets to be as unobtrusive as possible and hold the switch securly upside down.
To secure the switch, insert into the rack mount, Then insert the small side into the switch slot and slide the large side (with the flat side toward the back of the switch) onto the raised area on the mount to lock it into place.
A simple mini rack slot in for TL-SG108E TP Link switch
Resized Fire Extinguisher or Gas Torch Holder by The_BeardBot to fit my larger 108mm diameter extinguisher. The screw holes sizes are in tact so the same hardware can be used. I just used some doubled up electrical tape for the strap.…
Rack mount ears for Netgear GS108E switch. Remember to hold switch while pluging cables to prevent it from moving to the back. I've added a hole on each ear for the switch feets. Inspired by: https://www.thingiverse.com/thing:249851 Print…
This model works with many cheap 1080p webcams that use a 55x19.5 mm PCB with three mounting holes. This gives a significant increase in resolution, and for many cameras brightness as well. Additionally some cameras have an adjustable…
Adapter für den Abricht- Dickenhobel. Ich verwende diesen mit einem Festool 36mm Schlauch. Die Muffe ist ca. Ø45mm
I modelled the original stand and then increased the area on which a cup can be placed. The optional brim is an anti-slip feature that should be carefully superglued to the top of the new stand. Print this in a food-safe material or…
TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)
I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…
A simple bracket for the D-Link DGS-108GL . Just print the model two times for a secure mount, or just once if you plan to rest the switch on the bottom bracket. Included a v2 version of the bracket, which is about 30% lighter and prints…
Modified the original model ( https://www.thingiverse.com/thing:683369 ) so that it can be printed in 3 pieces and glued together afterwards. This way the printed hinges are much stronger. Print Settings Printer Brand: Ultimaker Printer:…
---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…
![#0108 Drill Dust Collector [Hexagonal Design]](https://media.printables.com/media/prints/644771/images/5089916_cd5a9285-25fb-48c3-8ae8-2c8df40e9496_e05e5d78-6d47-4f5e-9234-0b1e89b15e90/rl-20231111-042.jpg)
